Festo ADN-40-50-A-P-A Compact Cylinder | 40 mm Bore 50 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO ADN-40-50-A-P-A compact cylinder. The FESTO ADN-40-50-A-P-A is a double-acting compact cylinder with a 40 mm piston diameter, 50 mm stroke, and P-A elastic end-position cushioning. It delivers 754 N theoretical advance force and 686 N return force at 6 bar, and operates from 0.6 bar to 10 bar. It combines the higher force of the 40 mm bore with a 50 mm stroke in a compact body, used for clamping, press-fit, and transfer motions where more force than the 32 mm bore is needed and the travel exceeds 25 mm.
Conatct For Details
DetailReview(0)Additional

Festo ADN-40-50-A-P-A Compact Cylinder | 40 mm Bore 50 mm

HYRIG can supply the FESTO ADN-40-50-A-P-A compact cylinder. The FESTO ADN-40-50-A-P-A is a double-acting compact cylinder with a 40 mm piston diameter, 50 mm stroke, and P-A elastic end-position cushioning. It delivers 754 N theoretical advance force and 686 N return force at 6 bar, and operates from 0.6 bar to 10 bar. It combines the higher force of the 40 mm bore with a 50 mm stroke in a compact body, used for clamping, press-fit, and transfer motions where more force than the 32 mm bore is needed and the travel exceeds 25 mm.

Key Facts



Cylinder typeCompact cylinder, ADN series
Piston diameter40 mm
Stroke50 mm
Mode of operationDouble-acting
CushioningP-A elastic, both ends
Operating pressure0.6 bar … 10 bar
Theoretical force at 6 bar754 N advance / 686 N return
Pneumatic connectionG1/8
StandardISO 21287
Order code536296

Festo ADN-40 Model Specifications & Stroke Variants

ModelBoreStrokeForce at 6 bar advancePortOrder code
ADN-40-50-A-P-A40 mm50 mm754 NG1/8536296
ADN-40-25-A-P-A40 mm25 mm754 NG1/8—

Explore the full range in the FESTO ADN compact cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
StandardISO 21287
Piston diameter40 mm
Stroke50 mm
Pneumatic connectionG1/8
CushioningP-A elastic, both ends
Operating pressure0.6 bar … 10 bar
Ambient temperature-20 °C … +80 °C

Structure / Working Principle

The ADN-40-50-A-P-A uses the compact cylinder body with a 40 mm bore and 50 mm stroke. The 40 mm bore produces 754 N theoretical advance force and 686 N return force at 6 bar, the same piston area as the ADVUL-40 series. The elastic cushioning at both ends absorbs the end-of-stroke impact without an adjustment screw.

Compared with the ADN-32-25, the 40 mm bore increases the force from 483 N to 754 N (approximately 56% higher) while adding only a moderate increase in body size. The 50 mm stroke is longer than the 25 mm ADN-40 variant, covering applications that need more travel without going to an ISO 15552 cylinder. The 0.6 bar lower pressure limit remains the same across the ADN series.

Applications

  • Medium clamping with longer travel: where the clamp must open 50 mm to clear the workpiece, and the 40 mm bore provides the clamp force.
  • Press-fit stations: where 754 N at 6 bar is needed for the insertion force, and the 50 mm stroke covers the insertion depth.
  • Transfer slides with medium loads: where the load requires more than 483 N (ADN-32) but the available space cannot accommodate an ISO 15552 cylinder.
  • Low-pressure supply systems: the 0.6 bar lower limit allows operation from a supply that would be below the ADVU 1.2 bar minimum.

Selection Support

Not sure whether 754 N at 6 bar is sufficient for your clamp or press-fit load, or need the 25 mm stroke variant for a shorter motion? Send your load, required force, available space, supply pressure, and mounting orientation, and we will confirm the cylinder model and accessory combination.

Frequently Asked Questions

Q: What is the theoretical force of the Festo ADN-40-50-A-P-A at 6 bar?
A: 754 N advance and 686 N return, based on the 40 mm piston area.

Q: Does the ADN-40-50-A-P-A have adjustable cushioning?
A: No. The ADN series uses P-A elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series.

Q: What is the difference between ADN-40-50 and ADVU-40-50?
A: Both have a 40 mm bore and deliver 754 N at 6 bar. The ADN operates from 0.6 bar and uses elastic cushioning; the ADVU operates from 1.2 bar and has a different body design for specific mounting configurations.

Q: What is the pneumatic connection size of the ADN-40-50-A-P-A?
A: G1/8, matching the standard fittings for this bore size.

Q: What is the lead time for Festo ADN-40-50-A-P-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO ADN-40-50-A-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit