HYRIG can supply the FESTO ADVUL ISO 21287 compact cylinder range and its variants. The ADVUL series is a double-acting compact cylinder family with an anti-rotation piston rod guided by an additional rod and yoke plate, bore sizes from 32 mm to 40 mm, and P-A elastic end-position cushioning. It is used where a compact cylinder must resist torque on the piston rod — clamping, press-fit, and lift applications where the load would otherwise rotate the rod.
| Series | ADVUL, compact cylinder with anti-rotation |
| Standard | ISO 21287 |
| Bore range | 32 mm, 40 mm |
| Stroke range | 25 mm, 100 mm, 180 mm |
| Operating pressure | 1 bar … 10 bar |
| Cushioning | P-A elastic, both ends |
| Anti-rotation | Guided piston rod with yoke plate |
| Force at 6 bar | 483 N, 754 N advance |
| Model | Bore | Stroke | Force at 6 bar advance | Anti-rotation | Order code |
|---|---|---|---|---|---|
| ADVUL-32-100-P-A | 32 mm | 100 mm | 483 N | Guided rod + yoke plate | 156004 series |
| ADVUL-40-25-P-A | 40 mm | 25 mm | 754 N | Guided rod + yoke plate | 156888 |
| ADVUL-40-180-P-A | 40 mm | 180 mm | 754 N | Guided rod + yoke plate | 156205 |
Data source: Technical data table.
The ADVUL series uses a compact cylinder body with an anti-rotation piston rod. The piston rod is guided by an additional rod and a yoke plate, which prevents the rod from rotating around its axis. This is important when the load is attached to the rod and would otherwise twist under torque — for example, a clamp arm or a press tool that must stay aligned.
The 32 mm bore produces 483 N at 6 bar; the 40 mm bore produces 754 N. The 1 bar lower pressure limit is lower than the ADVU 1.2 bar minimum, so the ADVUL can operate from a supply that would be borderline for the ADVU. The elastic cushioning absorbs the end-of-stroke impact without an adjustment screw.
Start with the torque requirement: if the load would rotate a standard piston rod, the ADVUL anti-rotation guide is the reason to choose this family. Next, confirm the bore and stroke: the 32 mm bore covers medium loads over 100 mm; the 40 mm bore covers higher loads over 25 mm or 180 mm. Finally, confirm the operating pressure: the ADVUL operates from 1 bar to 10 bar; if the supply can drop below 1 bar, consider the ADN series (0.6 bar).
Q: What is the difference between ADVUL and ADN compact cylinders?
A: ADVUL has an anti-rotation piston rod guided by a rod and yoke plate. ADN is a standard compact cylinder without anti-rotation, with a 0.6-10 bar range.
Q: What is the operating pressure range of the Festo ADVUL series?
A: 1 bar to 10 bar, with 483 N to 754 N theoretical force at 6 bar depending on bore.
Q: Does the ADVUL series have adjustable cushioning?
A: No. ADVUL uses P-A elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series.
Q: What is the impact energy rating of ADVUL-40-25-P-A?
A: 0.52 J per end position. Confirm that the moving mass and velocity produce an impact energy within this limit.
Q: What is the lead time for Festo ADVUL compact cylinders?
A: Standard lead time is 2-3 weeks from order confirmation, based on the quoted supply status.
For FESTO ADVUL compact cylinder selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.