HYRIG can supply the FESTO ADVUL-32-100-P-A compact cylinder. The FESTO ADVUL-32-100-P-A is a double-acting compact cylinder with a 32 mm piston diameter, 100 mm stroke, and an anti-rotation piston rod guided by a rod and yoke plate. It delivers 483 N theoretical advance force at 6 bar and operates from 1 bar to 10 bar with elastic end-position cushioning. It is used where a 32 mm bore provides sufficient force for a medium load over a 100 mm travel, and the load must not rotate the piston rod — compact press-fit, clamping, and transfer applications.
| Cylinder type | Compact cylinder, ADVUL series |
| Piston diameter | 32 mm |
| Stroke | 100 mm |
| Mode of operation | Double-acting |
| Anti-rotation | Guided piston rod with yoke plate |
| Theoretical force at 6 bar | 483 N advance |
| Operating pressure | 1 bar … 10 bar |
| Cushioning | Elastic, both ends |
| Order code | 156004系列 |
| Model | Bore | Stroke | Force at 6 bar advance | Anti-rotation | Order code |
|---|---|---|---|---|---|
| ADVUL-32-100-P-A | 32 mm | 100 mm | 483 N | Guided rod + yoke plate | 156004系列 |
| ADVUL-40-25-P-A | 40 mm | 25 mm | 754 N | Guided rod + yoke plate | 156888 |
| ADVUL-40-180-P-A | 40 mm | 180 mm | 754 N | Guided rod + yoke plate | 156205 |
Explore the full range in the FESTO ADVUL compact cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Standard | ISO 21287 |
| Piston diameter | 32 mm |
| Stroke | 100 mm |
| Pneumatic connection | G1/8 |
| Operating pressure | 1 bar … 10 bar |
| Cushioning | Elastic, both ends |
| Anti-rotation | Guided piston rod with yoke plate |
| Operating temperature | -20 °C … +80 °C |
The ADVUL-32-100-P-A uses the same anti-rotation piston rod principle as the ADVUL-40 series, but with a 32 mm bore. The piston rod is guided by an additional rod and a yoke plate, preventing rotation around the rod axis. The 32 mm bore produces 483 N theoretical advance force at 6 bar — lower than the 40 mm bore (754 N) but sufficient for medium loads.
The operating pressure range is 1 bar to 10 bar, and the elastic cushioning absorbs the end-of-stroke impact without an adjustment screw. The 100 mm stroke is longer than the 25 mm ADVUL-40 variant but shorter than the 180 mm variant. Compared with a standard compact cylinder (ADN-32-40), the ADVUL-32-100 provides anti-rotation and a longer stroke in a similar body size, at the cost of a higher minimum pressure (1 bar vs 0.6 bar).
Replacing a standard compact cylinder or a competitor anti-rotation cylinder with the ADVUL-32-100-P-A? Check these four points:
For a broader replacement checklist, see the FESTO compact cylinder replacement guide.
Not sure whether 483 N at 6 bar is sufficient for your load, or need the 40 mm bore for higher force? Send your load, torque on the rod, required travel, supply pressure, and available space, and we will confirm the bore size and mounting accessories.
Q: What is the theoretical force of the Festo ADVUL-32-100-P-A at 6 bar?
A: 483 N advance, based on the 32 mm piston area.
Q: What is the difference between ADVUL-32-100 and ADVUL-40-25?
A: Both have anti-rotation guides. The 32 mm bore delivers 483 N at 6 bar; the 40 mm bore delivers 754 N. The 32 mm variant has a 100 mm stroke; the 40 mm variant has a 25 mm stroke.
Q: Does the ADVUL-32-100-P-A have adjustable cushioning?
A: No. It uses elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series.
Q: What is the minimum operating pressure?
A: 1 bar. If the system supply pressure can drop below 1 bar, the ADVUL may not operate reliably — consider a cylinder with a lower minimum pressure (such as the ADN series, 0.6 bar).
Q: What is the lead time for Festo ADVUL-32-100-P-A?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.
For FESTO ADVUL-32-100-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.