Festo DFM-25-80-P-A-GF Guided Cylinder | 25 mm Bore 80 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO DFM-25-80-P-A-GF guided cylinder. The FESTO DFM-25-80-P-A-GF is a double-acting guided drive with a 25 mm piston diameter, 80 mm stroke, a plain-bearing guide (GF), and P-A elastic end-position cushioning. It delivers 295 N theoretical advance force at 6 bar. It is the shorter-stroke variant of the DFM-25 plain-bearing guide series, used where the required travel is 80 mm and the elastic cushioning is sufficient for the load.
Conatct For Details
DetailReview(0)Additional

Festo DFM-25-80-P-A-GF Guided Cylinder | 25 mm Bore 80 mm

HYRIG can supply the FESTO DFM-25-80-P-A-GF guided cylinder. The FESTO DFM-25-80-P-A-GF is a double-acting guided drive with a 25 mm piston diameter, 80 mm stroke, a plain-bearing guide (GF), and P-A elastic end-position cushioning. It delivers 295 N theoretical advance force at 6 bar. It is the shorter-stroke variant of the DFM-25 plain-bearing guide series, used where the required travel is 80 mm and the elastic cushioning is sufficient for the load.

Key Facts



Drive typeGuided drive, DFM series
Piston diameter25 mm
Stroke80 mm
Guide typePlain-bearing guide (GF)
Theoretical force at 6 bar295 N advance / 247 N return
CushioningP-A elastic, both ends
Max. effective load at 50 mm86 N
Order code170927

Festo DFM-25 Model Specifications & Guide Variants

ModelGuide typeStrokeCushioningMax. effective loadOrder code
DFM-25-80-P-A-GFPlain-bearing80 mmP-A elastic86 N170927
DFM-25-100-B-PPV-A-GFPlain-bearing100 mmPPV adjustable86 N578876
DFM-25-100-P-A-KFRecirculating ball bearing100 mmP-A elastic121 N170928

Explore the full range in the FESTO DFM guided cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
Piston diameter25 mm
Stroke80 mm
Guide typePlain-bearing guide (GF)
Operating pressure0.15 MPa … 1 MPa (1.5 bar … 10 bar)
Max. effective load at 50 mm86 N
Max. moment Mx3.64 Nm
Max. moment My19.46 Nm
Max. moment Mz19.46 Nm
Pneumatic connectionG1/8
Operating temperature-20 °C … +80 °C

Structure / Working Principle

The DFM-25-80-P-A-GF uses the plain-bearing guide (GF) and P-A elastic cushioning. The plain-bearing guide absorbs lateral forces and moments, keeping the yoke plate on a precise linear path without rotation. The P-A elastic cushioning absorbs the end-of-stroke impact through a fixed elastomer element — there is no cushioning screw, which simplifies commissioning but means the deceleration profile cannot be tuned to different loads.

The 80 mm stroke is 20 mm shorter than the DFM-25-100 variants. This is useful when the machine envelope limits the travel to 80 mm and the 100 mm stroke would interfere with the frame or the workpiece. The max. effective load at 50 mm from the yoke is 86 N, the same as the other GF variants — the plain-bearing guide is the limiting factor, not the stroke.

Cross-Reference & Replacement

Replacing a plain-bearing guided cylinder with the DFM-25-80-P-A-GF? Check these four points:

  1. Bore and stroke: 25 mm / 80 mm — confirm that 80 mm covers the required travel.
  2. Guide type: GF plain-bearing — suitable for moderate side loads (86 N max effective load at 50 mm). If the existing application requires higher stiffness, consider the KF variant.
  3. Cushioning: P-A elastic — no adjustment screw. If the existing application relies on tuned cushioning, the P-A may change the deceleration profile.
  4. Mounting interface: compare the yoke plate hole pattern and guide rod spacing with the existing fixture.

For a broader replacement checklist, see the FESTO guided cylinder replacement guide.

Applications

  • Compact press-fit stations: where the press travel is 80 mm and the plain-bearing guide keeps the tool aligned.
  • Lift and lower motions with limited space: where the 80 mm stroke fits the machine envelope and the 295 N force covers the load.
  • Transfer slides with moderate side loads: where the 86 N max effective load is sufficient and the elastic cushioning is acceptable.
  • Replacement of existing 80 mm guided cylinders: in machinery with a DFM or similar guided drive footprint.

Selection Support

Not sure whether 80 mm stroke covers your travel, or need the 100 mm variant with PPV adjustable cushioning? Send your required travel, load, side-load direction, and available space, and we will confirm the stroke and cushioning variant.

Frequently Asked Questions

Q: What is the theoretical force of the Festo DFM-25-80-P-A-GF at 6 bar?
A: 295 N advance and 247 N return, based on the 25 mm piston area.

Q: Does the DFM-25-80-P-A-GF have adjustable cushioning?
A: No. The P-A suffix indicates elastic end-position cushioning without an adjustment screw.

Q: What is the max. effective load at 50 mm from the yoke?
A: 86 N, based on the plain-bearing guide capacity. This is the same as the 100 mm GF variant — the guide, not the stroke, is the limiting factor.

Q: What is the difference between the 80 mm and 100 mm DFM-25 GF variants?
A: The 80 mm variant has a shorter stroke and P-A elastic cushioning. The 100 mm variant (578876) has a longer stroke and PPV adjustable cushioning. Both use the same plain-bearing guide and deliver 295 N at 6 bar.

Q: What is the lead time for Festo DFM-25-80-P-A-GF?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO DFM-25-80-P-A-GF selection and yoke plate accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit