HYRIG can supply the FESTO DFM guided cylinder range and its variants. The DFM series is a double-acting guided drive with a 25 mm piston diameter, strokes of 80 mm or 100 mm, and either a plain-bearing guide (GF) or a recirculating ball bearing guide (KF). It delivers 295 N theoretical advance force at 6 bar and is used where the load must follow a precise linear path without rotation — press-fit, lift, and transfer applications where a standard cylinder would experience rod bending under side loads.
| Series | DFM, guided drive |
| Piston diameter | 25 mm |
| Stroke range | 80 mm, 100 mm |
| Guide type | Plain-bearing GF or recirculating ball bearing KF |
| Theoretical force at 6 bar | 295 N advance / 247 N return |
| Operating pressure | 1.5 bar … 10 bar |
| Cushioning | P-A elastic or PPV adjustable |
| Max. force Fz | 810.7 N |
| Model | Stroke | Guide type | Cushioning | Max. effective load | Order code |
|---|---|---|---|---|---|
| DFM-25-80-P-A-GF | 80 mm | Plain-bearing GF | P-A elastic | 86 N | 170927 |
| DFM-25-100-B-PPV-A-GF | 100 mm | Plain-bearing GF | PPV adjustable | 86 N | 578876 |
| DFM-25-100-P-A-KF | 100 mm | Recirculating ball KF | P-A elastic | 121 N | 170928 |
Data source: Technical data table.
The DFM series combines a pneumatic cylinder with a guide rod and a yoke plate. The piston rod drives the yoke, which slides on one or two guide rods supported by plain bearings (GF) or recirculating ball bearings (KF). The guide rods absorb lateral forces and moments, so the output yoke plate moves without rotation and without loading the piston rod in bending.
The plain-bearing GF guide is maintenance-free and suitable for moderate side loads. The recirculating ball KF guide provides higher stiffness and load capacity (121 N max effective load at 50 mm vs 86 N for GF), but is more sensitive to contamination. The PPV adjustable cushioning on the 100 mm GF variant lets you tune the exhaust air near end position; the P-A elastic cushioning on the other variants absorbs the impact without a tuning screw.
Not sure whether the plain-bearing GF or the recirculating ball KF guide is the correct choice for your side load, or need the matching yoke plate accessory? Send your load, side-load direction, required stiffness, moment arm, and mounting interface, and we will confirm the guide type and accessory combination. Explore related models: DFM-25-80-P-A-GF, DFM-25-100-B-PPV-A-GF, and DFM-25-100-P-A-KF. For replacement guidance, see the Festo guided cylinder replacement guide.
Q: What is the theoretical force of the Festo DFM-25 guided cylinder at 6 bar?
A: 295 N advance and 247 N return, based on the 25 mm piston area.
Q: What is the difference between GF and KF guides on the DFM series?
A: GF is a plain-bearing guide with 86 N max effective load; KF is a recirculating ball bearing guide with 121 N max effective load and higher stiffness.
Q: Does the DFM series have adjustable cushioning?
A: Only the DFM-25-100-B-PPV-A-GF has PPV adjustable cushioning. The other variants use P-A elastic cushioning.
Q: What is the maximum side force Fz of the DFM-25?
A: 810.7 N, based on the guide rod and bearing capacity. The actual permissible load depends on the stroke and distance from the guide.
Q: What is the lead time for Festo DFM guided cylinders?
A: Standard lead time is 7-17 days from order confirmation, based on the quoted supply status.
For FESTO DFM guided cylinder selection and yoke plate accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.