Festo LR-1/2-D-O-I-MIDI Regulator | G1/2, 3500 l/min

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO LR-1/2-D-O-I-MIDI pressure regulator. The FESTO LR-1/2-D-O-I-MIDI is a MIDI-size pressure regulator with a G1/2 port, a 0.5–12 bar adjustment range, and a 3500 l/min standard nominal flow rate. It is used in main air preparation units to set and maintain line pressure before the valve terminal or actuator bank, and the MIDI body size balances flow capacity against panel space.
Conatct For Details
DetailReview(0)Additional

Festo LR-1/2-D-O-I-MIDI Regulator | G1/2, 3500 l/min

HYRIG can supply the FESTO LR-1/2-D-O-I-MIDI pressure regulator. The FESTO LR-1/2-D-O-I-MIDI is a MIDI-size pressure regulator with a G1/2 port, a 0.5–12 bar adjustment range, and a 3500 l/min standard nominal flow rate. It is used in main air preparation units to set and maintain line pressure before the valve terminal or actuator bank, and the MIDI body size balances flow capacity against panel space.

Key Facts



Regulator typePressure regulator, LR series
SizeMIDI
Port threadG1/2
Adjustment range0.5 bar … 12 bar
Standard nominal flow rate3500 l/min
Grid dimension55 mm
Weight660 g
Order code192322

Festo LR Series MIDI Model Specifications & Variants

ModelPortAdjustment rangeFlow rateWeightOrder code
LR-1/2-D-O-I-MIDIG1/20.5-12 bar3500 l/min660 g192322
LR-1/2-D-MIDIG1/20.5-12 bar3500 l/min660 g159581
LR-3/8-D-O-I-MIDIG3/80.5-12 bar2800 l/min600 g192320

Explore the full range in the FESTO LR pressure regulator overview.

Data source: Technical data table.

Dimensions

ItemValue
Grid dimension55 mm
Port threadG1/2
Housing materialDie-cast zinc / aluminium
Adjusting knob materialPA
Weight660 g
Mounting typeIn-line or with accessories
Operating temperature-10 °C … +60 °C

Structure / Working Principle

The LR series is a diaphragm-type pressure regulator. Supply air enters the inlet port and passes through the valve seat; the downstream pressure acts on the diaphragm, which opposes the adjustable spring. Turning the knob changes the spring force, setting the downstream pressure. When the downstream pressure exceeds the setpoint, the diaphragm moves and reduces the valve opening, maintaining the set pressure.

The MIDI size uses a 55 mm grid dimension, which is wider than the MINI size but narrower than the MAXI size. The 3500 l/min flow rate covers main air lines feeding a valve terminal or a group of cylinders, and the 0.5–12 bar range covers most workshop air systems. The regulator does not include a pressure gauge by default — confirm the gauge port and whether a gauge is required for your installation.

Applications

  • Main air preparation: setting line pressure before a valve terminal or actuator bank, where a MIDI-size regulator balances flow and panel space.
  • Branch pressure control: reducing pressure for a specific machine section while the main line runs at a higher pressure.
  • Panel builders and OEM machine assembly: where a 55 mm grid regulator fits the existing air preparation unit.
  • Replacement of existing LR-1/2-D-MIDI units: in machinery with a G1/2 air preparation unit.

Selection Support

Not sure whether the MIDI flow rate covers your valve terminal demand, or need the MINI or MAXI size for a different flow range? Send your supply pressure, required downstream pressure, flow demand, and panel space, and we will confirm the regulator size and gauge configuration.

Frequently Asked Questions

Q: What is the adjustment range of the Festo LR-1/2-D-O-I-MIDI?
A: 0.5 bar to 12 bar, with a 3500 l/min standard nominal flow rate.

Q: Does the LR-1/2-D-O-I-MIDI come with a pressure gauge?
A: No. The regulator is supplied without a pressure gauge by default. Confirm the gauge port size and whether a gauge is required for your installation.

Q: What is the difference between LR and LFR regulators?
A: LR is a pressure regulator without filtration. LFR is a filter regulator that combines pressure regulation with a 5 μm filter and a condensate drain. Choose LFR when the air supply requires filtration before the regulator.

Q: What is the grid dimension of the MIDI size?
A: 55 mm. This is the panel footprint used to match the regulator with other air preparation components in the same size class.

Q: What is the lead time for Festo LR-1/2-D-O-I-MIDI?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO LR-1/2-D-O-I-MIDI selection and gauge configuration, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit