HYRIG can supply the FESTO LR-1/4-D-7-O-I-MINI pressure regulator. The FESTO LR-1/4-D-7-O-I-MINI is a MINI-size pressure regulator with a G1/4 port and a 0.5–7 bar adjustment range. It is used in compact air preparation units or at the point of use where panel space is limited and the downstream pressure does not need to exceed 7 bar.
| Regulator type | Pressure regulator, LR series |
| Size | MINI |
| Port thread | G1/4 |
| Adjustment range | 0.5 bar … 7 bar |
| Grid dimension | 40 mm |
| Weight | ~200 g |
| Order code | 162599 |
| Model | Port | Adjustment range | Size | Order code |
|---|---|---|---|---|
| LR-1/4-D-7-O-I-MINI | G1/4 | 0.5-7 bar | MINI | 162599 |
| LR-1/4-D-7-O-MINI | G1/4 | 0.5-7 bar | MINI | 162599 |
| LR-1/8-D-7-O-MINI | G1/8 | 0.5-7 bar | MINI | — |
Explore the full range in the FESTO LR pressure regulator overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Grid dimension | 40 mm |
| Port thread | G1/4 |
| Housing material | Die-cast zinc / aluminium |
| Weight | ~200 g |
| Mounting type | In-line or with accessories |
| Operating temperature | -10 °C … +60 °C |
The LR-1/4-D-7-O-I-MINI uses the same diaphragm-type pressure regulator principle as the MIDI size, but in a 40 mm grid body. Supply air enters the inlet port and passes through the valve seat; the downstream pressure acts on the diaphragm, which opposes the adjustable spring. Turning the knob changes the spring force, setting the downstream pressure.
The MINI size is used where the MIDI body (55 mm grid) would be too large for the available panel space. The G1/4 port matches the port size of small valve terminals and ADN compact cylinders. The 0.5–7 bar adjustment range covers low-pressure applications — if the system requires up to 12 bar, choose the MIDI or MAXI size instead. The regulator does not include a pressure gauge by default; confirm the gauge port and whether a gauge is required.
Not sure whether the MINI size provides enough flow for your valve terminal, or need the MIDI size for higher pressure or flow? Send your supply pressure, required downstream pressure, flow demand, and panel space, and we will confirm the regulator size and gauge configuration.
Q: What is the adjustment range of the Festo LR-1/4-D-7-O-I-MINI?
A: 0.5 bar to 7 bar, with a G1/4 port and a 40 mm grid dimension.
Q: What is the difference between MINI and MIDI regulators?
A: MINI has a 40 mm grid and a 0.5–7 bar range; MIDI has a 55 mm grid and a 0.5–12 bar range. Choose MINI when panel space is limited and the downstream pressure does not exceed 7 bar.
Q: Does the LR-1/4-D-7-O-I-MINI come with a pressure gauge?
A: No. The regulator is supplied without a pressure gauge by default. Confirm the gauge port size and whether a gauge is required.
Q: What is the port thread size of the LR-1/4-D-7-O-I-MINI?
A: G1/4, which matches the port size of small valve terminals and ADN compact cylinders.
Q: What is the lead time for Festo LR-1/4-D-7-O-I-MINI?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.
For FESTO LR-1/4-D-7-O-I-MINI selection and gauge configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.