HYRIG can supply the FESTO LOE-D-MIDI lubricator. The FESTO LOE-D-MIDI is a MIDI-size oil mist lubricator with a G1/2 port, a 16 bar maximum operating pressure, and a 110 cm³ oil capacity. It is used in air preparation units where pneumatic tools or cylinders require lubricated air, and the MIDI body size matches the LR and LFR regulators in the same size class.
| Lubricator type | Oil mist lubricator, LOE series |
| Size | MIDI |
| Port thread | G1/2 |
| Max. operating pressure | 16 bar |
| Oil capacity | 110 cm³ |
| Bowl material | Polycarbonate |
| Weight | 630 g |
| Order code | 192576 |
| Model | Port | Oil capacity | Max. pressure | Weight | Order code |
|---|---|---|---|---|---|
| LOE-D-MIDI | G1/2 | 110 cm³ | 16 bar | 630 g | 192576 |
| LOE-1/2-D-MIDI | G1/2 | 110 cm³ | 16 bar | 630 g | 159587 |
| LOE-3/8-D-MIDI | G3/8 | 110 cm³ | 16 bar | 630 g | 159586 |
Explore the full range in the FESTO LOE lubricator overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Grid dimension | 55 mm |
| Port thread | G1/2 |
| Bowl material | Polycarbonate |
| Max. oil capacity | 110 cm³ |
| Weight | 630 g |
| Mounting type | With accessories |
| Operating temperature | -10 °C … +60 °C |
The LOE series is a proportional oil mist lubricator. Air flows through the lubricator body and picks up oil from the bowl via a metering system; the oil is atomized into a fine mist and carried downstream to the tools or cylinders. The oil feed rate is adjusted by a metering screw, so the lubricant delivery can be matched to the air consumption.
The MIDI size uses a 55 mm grid dimension, matching the LR and LFR regulators. The 110 cm³ bowl provides a reasonable refill interval for most machine applications, and the polycarbonate bowl allows visual inspection of the oil level. The 16 bar maximum pressure covers standard workshop air systems. Lubrication is only necessary when the downstream equipment requires it — many modern cylinders and valves are designed for oil-free air, so confirm the equipment requirement before adding a lubricator to the air preparation unit.
Not sure whether your downstream equipment requires lubrication, or need the matching LR or LFR regulator in the same MIDI size? Send your equipment air requirement, flow demand, oil feed rate, and panel space, and we will confirm the lubricator configuration and oil type.
Q: What is the oil capacity of the Festo LOE-D-MIDI?
A: 110 cm³, with a 16 bar maximum operating pressure and a G1/2 port.
Q: Does the LOE-D-MIDI come with oil?
A: No. The lubricator is supplied without oil. Use a compatible pneumatic lubricant and confirm the oil type with the downstream equipment manufacturer.
Q: What is the difference between LOE and LOE-1/2-D-MIDI?
A: Both are MIDI-size lubricators with a 110 cm³ bowl and 16 bar maximum pressure. The LOE-D-MIDI is the base model; the LOE-1/2-D-MIDI has a G1/2 port designation. Confirm the port thread before ordering.
Q: Is lubrication always required for pneumatic cylinders?
A: No. Many modern FESTO cylinders and valves are designed for oil-free air. Once lubricated air is used, the system must continue with lubricated air. Confirm the equipment requirement before adding a lubricator.
Q: What is the lead time for Festo LOE-D-MIDI?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.
For FESTO LOE-D-MIDI selection and oil type confirmation, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.