HYRIG can supply the FESTO DSNU-20-100-PPV-A round cylinder. The FESTO DSNU-20-100-PPV-A is a double-acting round cylinder with a 20 mm piston diameter, 100 mm stroke, and PPV adjustable pneumatic cushioning at both ends, delivering 188.5 N theoretical force at 6 bar. It is used in light-duty linear motion applications where an ISO 6432 round body fits the machine envelope — packaging, small assembly fixtures, and light-duty transfer slides.
| Piston diameter | 20 mm |
| Stroke | 100 mm |
| Mode of operation | Double-acting |
| Cushioning | PPV adjustable pneumatic, both ends |
| Theoretical force at 6 bar | 188.5 N advance |
| Port thread | G1/8 |
| Piston rod thread | M8 |
| Standard | ISO 6432 |
| Order code | 19239 |
| Model | Bore | Stroke | Cushioning | Force at 6 bar | Port | Order code |
|---|---|---|---|---|---|---|
| DSNU-20-100-PPV-A | 20 mm | 100 mm | PPV adjustable | 188.5 N | G1/8 | 19239 |
| DSNU-20-25-P-A | 20 mm | 25 mm | P-A elastic | 188.5 N | G1/8 | 19208 |
| DSNU-25-80-PPV-A | 25 mm | 80 mm | PPV adjustable | 294.5 N | G1/8 | 19247 |
Explore the full range in the FESTO DSNU round cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Mounting standard | ISO 6432 |
| Piston diameter | 20 mm |
| Stroke | 100 mm |
| Pneumatic connection | G1/8 |
| Piston rod thread | M8 |
| Basic weight at 0 mm stroke | 186.8 g |
| Additional weight per 10 mm stroke | 7.2 g |
| Calculated weight at 100 mm stroke | ~258.8 g |
| Operating pressure | 1 bar … 10 bar |
The DSNU series is a round cylinder with a stainless steel barrel and PPV adjustable pneumatic cushioning. Compressed air enters one of the two G1/8 ports and drives the piston; the PPV cushioning at both ends lets you tune exhaust air near end position, so the load decelerates without hard impact. The cushioning screws remain accessible after mounting.
The 20 mm bore produces 188.5 N theoretical advance force at 6 bar, suitable for light loads. The round body is smaller than an ISO 15552 profile cylinder of the same bore, but it does not have the same sensor slot geometry — confirm the sensor mounting option if position feedback is required. The M8 piston rod thread accepts eye, clevis, or coupler attachments.
Not sure whether 188.5 N at 6 bar is sufficient for your load, or need the 25 mm bore for higher force? Send your load, required force, available space, and mounting orientation, and we will confirm the cylinder model and accessory combination.
Q: What is the theoretical force of the Festo DSNU-20-100-PPV-A at 6 bar?
A: 188.5 N advance, based on the 20 mm piston area.
Q: Does the DSNU-20-100-PPV-A have adjustable cushioning?
A: Yes. The PPV-A suffix indicates adjustable pneumatic cushioning at both ends. The cushioning screws remain accessible after mounting.
Q: What is the difference between PPV-A and P-A cushioning?
A: PPV-A is adjustable pneumatic cushioning; P-A is elastic cushioning without an adjustment screw. Choose PPV-A when the load or speed changes and cushioning needs to be tuned; choose P-A for simple, low-cost applications.
Q: What is the port thread size of the DSNU-20-100-PPV-A?
A: G1/8, with an M8 piston rod thread.
Q: What is the lead time for Festo DSNU-20-100-PPV-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO DSNU-20-100-PPV-A selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.