HYRIG can supply the FESTO SMT-8M-A-PS-24V-E-0,3-M12 proximity sensor. The FESTO SMT-8M-A-PS-24V-E-0,3-M12 is a magnetoresistive proximity sensor for T-slot cylinders, with a PNP normally-open output, a 5–30 VDC operating voltage range, and a 0.3 m cable terminating in an M12 plug. It is used to detect the piston position in DSBC, ADN, and other T-slot cylinders, providing a switching signal for sequence control or end-of-stroke confirmation.
| Sensor type | Magnetoresistive proximity sensor |
| Mounting | T-slot |
| Output function | PNP, normally open (NO) |
| Operating voltage | 5 VDC … 30 VDC |
| Electrical connection | 0.3 m cable + M12x1 plug, A-coded |
| Max. switching frequency | 130 Hz |
| Operating temperature | -40 °C … +85 °C |
| Order code | 574337 |
| Model | Output | Connection | Cable length | Order code |
|---|---|---|---|---|
| SMT-8M-A-PS-24V-E-0,3-M12 | PNP-NO | M12 plug | 0.3 m | 574337 |
| SMT-8M-A-PS-24V-E-0,3-M8D | PNP-NO | M8 plug | 0.3 m | 574334 |
| SMT-8M-A-PS-24V-E-2,5-M12 | PNP-NO | M12 plug | 2.5 m | — |
Explore the full range in the FESTO SMT-8M proximity sensor overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Mounting type | T-slot, insertable from above |
| Electrical connection | M12x1, A-coded |
| Cable length | 0.3 m |
| Operating voltage | 5 VDC … 30 VDC |
| Output function | PNP, normally open |
| Max. switching frequency | 130 Hz |
| Max. tightening torque | 0.6 Nm |
| Operating temperature | -40 °C … +85 °C |
The SMT-8M-A is a magnetoresistive sensor that detects the magnetic field of the piston magnet through the cylinder wall. It is inserted into the T-slot from above and secured with a screw; the magnetoresistive element provides a stable switching signal without contact wear. The PNP normally-open output means the sensor conducts when the piston magnet is in the sensing range, and the signal is available on the M12 plug.
The 0.3 m cable with M12 plug is suitable for short runs to a junction box or a valve terminal with an M12 input. The 130 Hz maximum switching frequency covers most cylinder cycle rates; if the application requires higher frequency, confirm the sensor specification. The -40 °C to +85 °C operating temperature range covers standard and low-temperature workshop environments.
Not sure whether the PNP-NO output matches your PLC input, or need the M8 plug variant for a different connector? Send your PLC input type, connector standard, cable length requirement, and cylinder model, and we will confirm the sensor output and connection.
Q: What is the output type of the Festo SMT-8M-A-PS-24V-E-0,3-M12?
A: PNP, normally open (NO), with a 5–30 VDC operating voltage range.
Q: What is the maximum switching frequency of this sensor?
A: 130 Hz, based on the magnetoresistive sensing element.
Q: What is the difference between SMT-8M-A-PS and SMT-8M-A-NS?
A: The PS suffix indicates a PNP output; the NS suffix indicates an NPN output. Confirm the PLC input type before ordering — a PNP sensor requires a sinking input, and an NPN sensor requires a sourcing input.
Q: Does the sensor come with a mounting screw?
A: The sensor is supplied with the sensor body and cable. Confirm whether the mounting screw is included in the scope of delivery, or order it separately.
Q: What is the lead time for Festo SMT-8M-A-PS-24V-E-0,3-M12?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO SMT-8M-A-PS-24V-E-0,3-M12 selection and connector configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.