Festo DSNU-20-25-P-A Cylinder | 20 mm Bore 25 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO DSNU-20-25-P-A round cylinder. The FESTO DSNU-20-25-P-A is a double-acting round cylinder with a 20 mm piston diameter, 25 mm stroke, and P-A elastic end-position cushioning, delivering 188.5 N theoretical force at 6 bar. It is the short-stroke variant of the DSNU-20, used where the travel is limited to 25 mm and elastic cushioning is sufficient — small ejectors, short-stroke clamps, and compact positioning motions.
Conatct For Details
DetailReview(0)Additional

Festo DSNU-20-25-P-A Cylinder | 20 mm Bore 25 mm

HYRIG can supply the FESTO DSNU-20-25-P-A round cylinder. The FESTO DSNU-20-25-P-A is a double-acting round cylinder with a 20 mm piston diameter, 25 mm stroke, and P-A elastic end-position cushioning, delivering 188.5 N theoretical force at 6 bar. It is the short-stroke variant of the DSNU-20, used where the travel is limited to 25 mm and elastic cushioning is sufficient — small ejectors, short-stroke clamps, and compact positioning motions.

Key Facts



Piston diameter20 mm
Stroke25 mm
Mode of operationDouble-acting
CushioningP-A elastic, both ends
Theoretical force at 6 bar188.5 N advance
Port threadG1/8
Piston rod threadM8
StandardISO 6432
Order code19208

Festo DSNU Series Model Specifications & Bore/Stroke Variants

ModelBoreStrokeCushioningForce at 6 barPortOrder code
DSNU-20-25-P-A20 mm25 mmP-A elastic188.5 NG1/819208
DSNU-20-100-PPV-A20 mm100 mmPPV adjustable188.5 NG1/819239
DSNU-25-80-PPV-A25 mm80 mmPPV adjustable294.5 NG1/819247

Explore the full range in the FESTO DSNU round cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
Mounting standardISO 6432
Piston diameter20 mm
Stroke25 mm
Pneumatic connectionG1/8
Piston rod threadM8
CushioningP-A elastic, both ends
Operating pressure1 bar … 10 bar

Structure / Working Principle

The DSNU-20-25-P-A uses the stainless steel round body with P-A elastic end-position cushioning. Unlike the PPV-A variant, there is no cushioning adjustment screw — the elastic cushioning absorbs the end-of-stroke impact through a fixed elastomer element. This simplifies commissioning and reduces cost, but the deceleration profile cannot be tuned to different loads or speeds.

The 20 mm bore produces 188.5 N theoretical advance force at 6 bar, the same as the DSNU-20-100-PPV-A. The 25 mm stroke keeps the overall body length short, so the cylinder fits into tight spaces where a longer stroke would interfere with the machine frame. The M8 piston rod thread accepts standard attachments.

Applications

  • Short-stroke ejectors: where the ejector travel is limited to 25 mm and 188.5 N at 6 bar is sufficient to push the part out.
  • Compact clamps: where the clamp travel is short and the elastic cushioning is adequate for the load.
  • Positioning motions: where a short, fixed stroke is needed and cushioning adjustment is not required.
  • Replacement of existing DSNU-20-25 units: in machinery with ISO 6432 round cylinder mounting.

Selection Support

Not sure whether 25 mm stroke covers your travel, or need the 100 mm stroke with PPV adjustable cushioning? Send your required travel, load, cycle rate, and available space, and we will confirm the cylinder model and cushioning variant.

Frequently Asked Questions

Q: What is the theoretical force of the Festo DSNU-20-25-P-A at 6 bar?
A: 188.5 N advance, based on the 20 mm piston area.

Q: Does the DSNU-20-25-P-A have adjustable cushioning?
A: No. The P-A suffix indicates elastic end-position cushioning, which has no adjustment screw. If adjustable cushioning is required, choose the PPV-A variant.

Q: What is the difference between P-A and PPV-A?
A: P-A is elastic cushioning with a fixed elastomer element; PPV-A is adjustable pneumatic cushioning with a tuning screw. Choose P-A for simple, low-cost applications; choose PPV-A when the load or speed changes and cushioning needs to be tuned.

Q: What is the port thread size of the DSNU-20-25-P-A?
A: G1/8, with an M8 piston rod thread.

Q: What is the lead time for Festo DSNU-20-25-P-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO DSNU-20-25-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit