HYRIG can supply the FESTO LFR-1/2-D-5M-O-MIDI-A filter regulator. The FESTO LFR-1/2-D-5M-O-MIDI-A is a MIDI-size filter regulator with a G1/2 port, 5 μm filtration, a 0.5–12 bar adjustment range, and a 2600 l/min standard nominal flow rate. It combines filtration and pressure regulation in one body, removing condensate and particulate before setting the downstream pressure — used at the inlet of a valve terminal or a machine section where the air supply is not already dried and filtered.
| Regulator type | Filter regulator, LFR series |
| Size | MIDI |
| Port thread | G1/2 |
| Filtration grade | 5 μm |
| Adjustment range | 0.5 bar … 12 bar |
| Standard nominal flow rate | 2600 l/min |
| Condensate drain | Fully automatic |
| Max. condensate volume | 43 ml |
| Weight | 900 g |
| Order code | 192625 |
| Model | Port | Filtration | Flow rate | Drain | Weight | Order code |
|---|---|---|---|---|---|---|
| LFR-1/2-D-5M-O-MIDI-A | G1/2 | 5 μm | 2600 l/min | Fully automatic | 900 g | 192625 |
| LFR-1/2-D-MIDI-A | G1/2 | 5 μm | 2600 l/min | Manual | 900 g | 186492 |
Explore the full range in the FESTO LFR filter regulator overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Grid dimension | 55 mm |
| Port thread | G1/2 |
| Bowl material | Metal bowl guard |
| Max. condensate volume | 43 ml |
| Weight | 900 g |
| Mounting type | In-line or with accessories |
| Operating temperature | 5 °C … 60 °C |
The LFR series combines a 5 μm filter element with a diaphragm-type pressure regulator in one body. Air enters the filter bowl, where condensate and particulate are separated; the filtered air then passes through the regulator valve, which sets the downstream pressure. The fully automatic drain (suffix -A) opens when condensate reaches a set level, so the bowl does not need manual draining during operation.
The MIDI size uses a 55 mm grid dimension, matching the LR series. The 2600 l/min flow rate is lower than the LR-1/2-D-O-I-MIDI (3500 l/min) because the filter element adds flow resistance. If the application requires higher flow, choose a larger size or a regulator-only unit. The 5 μm filtration grade removes most particles and coalesced oil droplets, but it is not a coalescing filter for oil-free air — confirm the air quality class if the application requires ISO 8573-1 [7:4:4] or better.
Not sure whether 5 μm filtration and 2600 l/min meet your air quality and flow requirements, or need the manual-drain variant? Send your air quality class, flow demand, condensate load, and panel space, and we will confirm the filter regulator configuration.
Q: What is the filtration grade of the Festo LFR-1/2-D-5M-O-MIDI-A?
A: 5 μm, with a 2600 l/min standard nominal flow rate and a 0.5–12 bar adjustment range.
Q: What does the "-A" suffix mean on the LFR-1/2-D-5M-O-MIDI-A?
A: The "-A" suffix indicates a fully automatic condensate drain. Without the suffix, the drain is manual.
Q: What is the maximum condensate volume?
A: 43 ml. The fully automatic drain opens when condensate reaches the set level, so the bowl does not need manual draining.
Q: What is the difference between LR and LFR?
A: LR is a pressure regulator without filtration. LFR combines a 5 μm filter and a pressure regulator in one body. Choose LFR when the air supply requires filtration before regulation.
Q: What is the lead time for Festo LFR-1/2-D-5M-O-MIDI-A?
A: Standard lead time is 3 weeks from order confirmation, based on the quoted supply status.
For FESTO LFR-1/2-D-5M-O-MIDI-A selection and drain configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.