HYRIG can supply the FESTO DSNU-25-80-PPV-A round cylinder. The FESTO DSNU-25-80-PPV-A is a double-acting round cylinder with a 25 mm piston diameter, 80 mm stroke, and PPV adjustable pneumatic cushioning at both ends, delivering 294.5 N theoretical force at 6 bar. It is the larger-bore variant of the DSNU-20 round cylinder, used where more force is needed for light-to-medium loads in an ISO 6432 round body — small clamps, ejectors, and compact transfer motions.
| Piston diameter | 25 mm |
| Stroke | 80 mm |
| Mode of operation | Double-acting |
| Cushioning | PPV adjustable pneumatic, both ends |
| Theoretical force at 6 bar | 294.5 N advance |
| Port thread | G1/8 |
| Piston rod thread | M10 × 1.25 |
| Standard | ISO 6432 |
| Order code | 19247 |
| Model | Bore | Stroke | Cushioning | Force at 6 bar | Port | Order code |
|---|---|---|---|---|---|---|
| DSNU-20-100-PPV-A | 20 mm | 100 mm | PPV adjustable | 188.5 N | G1/8 | 19239 |
| DSNU-20-25-P-A | 20 mm | 25 mm | P-A elastic | 188.5 N | G1/8 | 19208 |
| DSNU-25-80-PPV-A | 25 mm | 80 mm | PPV adjustable | 294.5 N | G1/8 | 19247 |
Explore the full range in the FESTO DSNU round cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Mounting standard | ISO 6432 |
| Piston diameter | 25 mm |
| Stroke | 80 mm |
| Pneumatic connection | G1/8 |
| Piston rod thread | M10 × 1.25 |
| Basic weight at 0 mm stroke | 238 g |
| Additional weight per 10 mm stroke | 11 g |
| Calculated weight at 80 mm stroke | ~326 g |
| Cushioning length | 17 mm |
| Operating pressure | 1 bar … 10 bar |
The DSNU-25-80-PPV-A uses the same stainless steel round body and PPV adjustable pneumatic cushioning as the DSNU-20, but with a 25 mm bore and a 17 mm cushioning length. The 25 mm bore produces 294.5 N theoretical advance force at 6 bar, approximately 56% more than the 20 mm bore (188.5 N). The PPV cushioning at both ends lets you tune exhaust air near end position, so the higher moving mass decelerates without hard impact.
The G1/8 port matches the DSNU-20, but the M10 × 1.25 piston rod thread is larger and accepts heavier attachments. The round body does not have the sensor slots of an ISO 15552 profile cylinder — confirm the sensor mounting option if position feedback is required. The 80 mm stroke is shorter than the DSNU-20-100, so confirm the required travel before ordering.
Not sure whether 294.5 N at 6 bar is sufficient for your clamp or ejector load, or need the DSNU-20-100 for a longer stroke? Send your load, required force, stroke requirement, and available space, and we will confirm the cylinder model and accessory combination.
Q: What is the theoretical force of the Festo DSNU-25-80-PPV-A at 6 bar?
A: 294.5 N advance, based on the 25 mm piston area.
Q: Does the DSNU-25-80-PPV-A have adjustable cushioning?
A: Yes. The PPV-A suffix indicates adjustable pneumatic cushioning at both ends, with a 17 mm cushioning length.
Q: What is the difference between DSNU-20 and DSNU-25?
A: The DSNU-25 has a 25 mm bore and delivers 294.5 N at 6 bar; the DSNU-20 has a 20 mm bore and delivers 188.5 N. The DSNU-25 also uses a larger M10 piston rod thread.
Q: What is the port thread size of the DSNU-25-80-PPV-A?
A: G1/8, with an M10 × 1.25 piston rod thread.
Q: What is the lead time for Festo DSNU-25-80-PPV-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO DSNU-25-80-PPV-A selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.