HYRIG can supply the FESTO DGPL-25-170-PPV-A-KF-B linear drive. The FESTO DGPL-25-170-PPV-A-KF-B is a rodless linear drive with a 25 mm piston diameter, 170 mm stroke, a recirculating ball bearing guide (KF), and PPV adjustable pneumatic cushioning. It delivers 295 N theoretical force at 6 bar and operates from 2 bar to 8 bar. The rodless design keeps the overall length close to the stroke length, making it suitable for long-travel applications where a piston-rod cylinder would be too long.
| Drive type | Rodless linear drive, DGPL series |
| Piston diameter | 25 mm |
| Stroke | 170 mm |
| Guide type | Recirculating ball bearing guide (KF) |
| Theoretical force at 6 bar | 295 N |
| Operating pressure | 2 bar … 8 bar |
| Cushioning | PPV adjustable pneumatic, both ends |
| Basic weight at 0 mm stroke | 1520 g |
| Additional weight per 10 mm stroke | 53 g |
| Order code | 161792 |
| Model | Stroke | Force at 6 bar | Guide | Basic weight | Order code |
|---|---|---|---|---|---|
| DGPL-25-170-PPV-A-KF-B | 170 mm | 295 N | Recirculating ball bearing | 1520 g | 161792 |
| DGPL-25-270-PPV-A-KF-B | 270 mm | 295 N | Recirculating ball bearing | 1520 g | 161792系列 |
Explore the full range in the FESTO DGPL linear drive overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Piston diameter | 25 mm |
| Stroke | 170 mm |
| Guide type | Recirculating ball bearing guide (KF) |
| Operating pressure | 2 bar … 8 bar |
| Basic weight at 0 mm stroke | 1520 g |
| Additional weight per 10 mm stroke | 53 g |
| Calculated weight at 170 mm stroke | 1520 + (17 × 53) = 2421 g |
| Pneumatic connection | G1/8 |
| Permissible lateral force during switching | 147 N |
| Operating temperature | -10 °C … +60 °C |
The DGPL is a rodless linear drive with a recirculating ball bearing guide. The piston inside the profile barrel is connected to an external slide carriage through a slot; the carriage runs on recirculating ball bearings along the guide rail. Because there is no piston rod, the overall length of the drive is approximately equal to the stroke plus the end caps — there is no rod extension that would double the length at full stroke.
The recirculating ball bearing guide (KF) provides high stiffness and load capacity with low friction. The permissible lateral force during switching is 147 N. The PPV adjustable pneumatic cushioning at both ends lets you tune the exhaust air near end position, so the carriage decelerates without hard impact — important for long-stroke applications where the moving mass is higher. The operating pressure range of 2–8 bar is narrower than a standard cylinder (0.6–12 bar), so confirm that the supply pressure is within this range before ordering.
Replacing a rodless linear drive or a competitor unit with the DGPL-25-170-PPV-A-KF-B? Check these five points:
For a broader replacement checklist, see the FESTO rodless linear drive replacement guide.
Not sure whether the 170 mm stroke and 295 N force cover your transfer application, or need the 270 mm variant for a longer travel? Send your load, required travel, lateral force, supply pressure, and mounting interface, and we will confirm the stroke, guide type, and accessory combination.
Q: What is the theoretical force of the Festo DGPL-25-170-PPV-A-KF-B at 6 bar?
A: 295 N, based on the 25 mm piston area.
Q: What is the operating pressure range of the DGPL-25-170-PPV-A-KF-B?
A: 2 bar to 8 bar, which is narrower than a standard cylinder. Confirm that the supply pressure is within this range before ordering.
Q: What is the weight at 170 mm stroke?
A: Approximately 2421 g, calculated from 1520 g basic weight plus 53 g per 10 mm stroke (17 × 53 g).
Q: Does the DGPL-25-170-PPV-A-KF-B have adjustable cushioning?
A: Yes. The PPV-A suffix indicates adjustable pneumatic cushioning at both ends. The cushioning screws remain accessible after mounting.
Q: What is the lead time for Festo DGPL-25-170-PPV-A-KF-B?
A: Standard lead time is 7–8 weeks from order confirmation, based on the quoted supply status.
For FESTO DGPL-25-170-PPV-A-KF-B selection and carriage accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.