Festo ADVUL-40-25-P-A Compact Cylinder | 40 mm Bore 25 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO ADVUL-40-25-P-A compact cylinder. The FESTO ADVUL-40-25-P-A is a double-acting compact cylinder with a 40 mm piston diameter, 25 mm stroke, and an anti-rotation piston rod guided by a rod and yoke plate. It delivers 754 N theoretical advance force at 6 bar and operates from 1 bar to 10 bar with elastic end-position cushioning. It is used where a compact cylinder must resist torque on the piston rod — clamping, press-fit, and lift applications where the load would otherwise rotate the rod.
Conatct For Details
DetailReview(0)Additional

Festo ADVUL-40-25-P-A Compact Cylinder | 40 mm Bore 25 mm

HYRIG can supply the FESTO ADVUL-40-25-P-A compact cylinder. The FESTO ADVUL-40-25-P-A is a double-acting compact cylinder with a 40 mm piston diameter, 25 mm stroke, and an anti-rotation piston rod guided by a rod and yoke plate. It delivers 754 N theoretical advance force at 6 bar and operates from 1 bar to 10 bar with elastic end-position cushioning. It is used where a compact cylinder must resist torque on the piston rod — clamping, press-fit, and lift applications where the load would otherwise rotate the rod.

Key Facts



Cylinder typeCompact cylinder, ADVUL series
Piston diameter40 mm
Stroke25 mm
Mode of operationDouble-acting
Anti-rotationGuided piston rod with yoke plate
Theoretical force at 6 bar754 N advance / 686 N return
Operating pressure1 bar … 10 bar
CushioningElastic, both ends
Impact energy in end positions0.52 J
Order code156888

Festo ADVUL-40 Model Specifications & Stroke Variants

ModelStrokeForce at 6 bar advanceImpact energyOrder code
ADVUL-40-25-P-A25 mm754 N0.52 J156888
ADVUL-40-180-P-A180 mm754 N0.52 J156205

Explore the full range in the FESTO ADVUL compact cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
StandardISO 21287
Piston diameter40 mm
Stroke25 mm
Pneumatic connectionG1/8
Operating pressure1 bar … 10 bar
Impact energy in end positions0.52 J
CushioningElastic, both ends
Anti-rotationGuided piston rod with yoke plate
Operating temperature-20 °C … +80 °C

Structure / Working Principle

The ADVUL series is a compact cylinder with an anti-rotation piston rod. Unlike a standard compact cylinder (such as the ADN series), the ADVUL piston rod is guided by an additional rod and a yoke plate, which prevents the rod from rotating around its axis. This is important when the load is attached to the rod and would otherwise twist under torque — for example, a clamp arm or a press tool that must stay aligned.

The 40 mm bore produces 754 N theoretical advance force at 6 bar and 686 N return force. The operating pressure range is 1 bar to 10 bar, which is wider than the ADVU series (1.2–10 bar) but narrower than the ADN series (0.6–10 bar). The elastic cushioning at both ends absorbs the end-of-stroke impact with an impact energy rating of 0.52 J. The G1/8 port provides sufficient flow for the 40 mm bore over the 25 mm stroke.

Cross-Reference & Replacement

Replacing a standard compact cylinder or a competitor anti-rotation cylinder with the ADVUL-40-25-P-A? Check these four points:

  1. Bore and stroke: 40 mm / 25 mm — confirm the force and travel match the existing application.
  2. Anti-rotation: the ADVUL has a guided piston rod with a yoke plate. If the existing cylinder is a standard compact cylinder without anti-rotation, the ADVUL is an upgrade — but confirm that the yoke plate and guide rod fit the existing mounting space.
  3. Operating pressure: 1–10 bar — confirm that the supply pressure is within this range. If the system runs below 1 bar, the ADVUL may not operate reliably.
  4. Impact energy: 0.52 J per end position. Confirm that the moving mass and velocity produce an impact energy within this limit; if not, consider a cylinder with adjustable cushioning (such as the DSBC series).

For a broader replacement checklist, see the FESTO compact cylinder replacement guide.

Applications

  • Clamping with a rotating load risk: where the clamp arm would twist a standard piston rod, and the ADVUL anti-rotation guide keeps it aligned.
  • Press-fit stations: where the press tool must stay perpendicular to the workpiece, and the guided rod prevents tilting.
  • Lift and lower motions with an offset load: where the load centre is not on the rod axis, and the anti-rotation guide absorbs the torque.
  • Replacement of existing ADVUL-40-25 units: in machinery with an ISO 21287 compact cylinder footprint and a 40 mm bore.

Selection Support

Not sure whether the anti-rotation guide is necessary for your load, or need the 180 mm stroke variant for a longer travel? Send your load, torque on the rod, required travel, supply pressure, and available space, and we will confirm the cylinder model and mounting accessories.

Frequently Asked Questions

Q: What is the theoretical force of the Festo ADVUL-40-25-P-A at 6 bar?
A: 754 N advance and 686 N return, based on the 40 mm piston area.

Q: What is the difference between ADVUL and ADN compact cylinders?
A: ADVUL has an anti-rotation piston rod guided by a rod and yoke plate, which prevents the rod from rotating. ADN is a standard compact cylinder without anti-rotation. ADVUL also has a 1–10 bar pressure range, while ADN operates from 0.6–10 bar.

Q: What is the impact energy rating?
A: 0.52 J per end position. Confirm that the moving mass and velocity produce an impact energy within this limit.

Q: Does the ADVUL-40-25-P-A have adjustable cushioning?
A: No. It uses elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series.

Q: What is the lead time for Festo ADVUL-40-25-P-A?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO ADVUL-40-25-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit