Festo DGPL-25-270-PPV-A-KF-B Linear Drive | 25 mm, 270 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO DGPL-25-270-PPV-A-KF-B linear drive. The FESTO DGPL-25-270-PPV-A-KF-B is a rodless linear drive with a 25 mm piston diameter, 270 mm stroke, a recirculating ball bearing guide (KF), and PPV adjustable pneumatic cushioning. It delivers 295 N theoretical force at 6 bar and operates from 2 bar to 8 bar. It is the longer-stroke variant of the DGPL-25 series, used where the transfer distance exceeds 200 mm and a rodless design keeps the overall machine length compact.
Conatct For Details
DetailReview(0)Additional

Festo DGPL-25-270-PPV-A-KF-B Linear Drive | 25 mm, 270 mm

HYRIG can supply the FESTO DGPL-25-270-PPV-A-KF-B linear drive. The FESTO DGPL-25-270-PPV-A-KF-B is a rodless linear drive with a 25 mm piston diameter, 270 mm stroke, a recirculating ball bearing guide (KF), and PPV adjustable pneumatic cushioning. It delivers 295 N theoretical force at 6 bar and operates from 2 bar to 8 bar. It is the longer-stroke variant of the DGPL-25 series, used where the transfer distance exceeds 200 mm and a rodless design keeps the overall machine length compact.

Key Facts



Drive typeRodless linear drive, DGPL series
Piston diameter25 mm
Stroke270 mm
Guide typeRecirculating ball bearing guide (KF)
Theoretical force at 6 bar295 N
Operating pressure2 bar … 8 bar
CushioningPPV adjustable pneumatic, both ends
Basic weight at 0 mm stroke1520 g
Additional weight per 10 mm stroke53 g
Order code161792系列

Festo DGPL-25 Model Specifications & Stroke Variants

ModelStrokeForce at 6 barGuideBasic weightOrder code
DGPL-25-170-PPV-A-KF-B170 mm295 NRecirculating ball bearing1520 g161792
DGPL-25-270-PPV-A-KF-B270 mm295 NRecirculating ball bearing1520 g161792系列

Explore the full range in the FESTO DGPL linear drive overview.

Data source: Technical data table.

Dimensions

ItemValue
Piston diameter25 mm
Stroke270 mm
Guide typeRecirculating ball bearing guide (KF)
Operating pressure2 bar … 8 bar
Basic weight at 0 mm stroke1520 g
Additional weight per 10 mm stroke53 g
Calculated weight at 270 mm stroke1520 + (27 × 53) = 2951 g
Pneumatic connectionG1/8
Permissible lateral force during switching147 N
Operating temperature-10 °C … +60 °C

Structure / Working Principle

The DGPL-25-270-PPV-A-KF-B uses the same rodless linear drive principle and recirculating ball bearing guide (KF) as the 170 mm variant, but with a longer stroke. The piston inside the profile barrel is connected to the external carriage through a slot; the carriage runs on recirculating ball bearings along the guide rail. The absence of a piston rod means the overall length is approximately the stroke plus the end caps — a 270 mm stroke does not require a 540 mm overall length, which is the key advantage over a piston-rod cylinder of the same stroke.

The PPV adjustable pneumatic cushioning at both ends lets you tune the exhaust air near end position, so the carriage decelerates without hard impact. The longer stroke means the moving mass is higher (2951 g at 270 mm vs 2421 g at 170 mm), so the cushioning adjustment becomes more important. The operating pressure range of 2–8 bar and the permissible lateral force of 147 N are the same as the 170 mm variant.

Cross-Reference & Replacement

Replacing a longer-stroke rodless linear drive with the DGPL-25-270-PPV-A-KF-B? Check these five points:

  1. Bore and stroke: 25 mm / 270 mm — confirm the force and travel match the existing application.
  2. Guide type: KF recirculating ball bearing — confirm that the lateral force (147 N during switching) and moment loads are within the guide capacity. The longer stroke increases the moment arm, so the permissible moment may be lower than for the 170 mm variant.
  3. Operating pressure: 2–8 bar — confirm that the supply pressure is within this range.
  4. Mounting interface: compare the carriage hole pattern and the guide rail mounting with the existing fixture. The longer stroke may require additional support for the guide rail if the machine frame is not rigid enough.
  5. Weight and moving mass: the basic weight is 1520 g, and the moving mass increases by 53 g per 10 mm stroke. At 270 mm, the total weight is approximately 2951 g. Confirm that the machine frame and the drive system can handle the higher moving mass.

For a broader replacement checklist, see the FESTO rodless linear drive replacement guide.

Applications

  • Long-travel transfer slides: where the 270 mm stroke covers the transfer distance and a piston-rod cylinder would be too long for the machine envelope.
  • Pick-and-place with a longer carriage travel: where the recirculating ball bearing guide provides the stiffness needed for precise positioning over 270 mm.
  • Machine-tool and packaging applications: where the DGPL is integrated into a gantry or a linear axis and the longer stroke is required.
  • Replacement of existing DGPL-25-270 units: in machinery with a DGPL mounting footprint and a 25 mm piston drive.

Selection Support

Not sure whether the 270 mm stroke covers your transfer distance, or need the 170 mm variant for a shorter travel? Send your load, required travel, lateral force, supply pressure, mounting interface, and available space, and we will confirm the stroke, guide type, and accessory combination.

Frequently Asked Questions

Q: What is the theoretical force of the Festo DGPL-25-270-PPV-A-KF-B at 6 bar?
A: 295 N, based on the 25 mm piston area.

Q: What is the weight at 270 mm stroke?
A: Approximately 2951 g, calculated from 1520 g basic weight plus 53 g per 10 mm stroke (27 × 53 g).

Q: Does a 270 mm stroke require additional guide rail support?
A: It depends on the machine frame rigidity and the load. For long strokes, the guide rail may need additional support to prevent deflection. Send the mounting details and we will confirm the support requirements.

Q: Does the DGPL-25-270-PPV-A-KF-B have adjustable cushioning?
A: Yes. The PPV-A suffix indicates adjustable pneumatic cushioning at both ends. On a 270 mm stroke with higher moving mass, the cushioning adjustment is more critical than on the 170 mm variant.

Q: What is the lead time for Festo DGPL-25-270-PPV-A-KF-B?
A: Standard lead time is 7–8 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO DGPL-25-270-PPV-A-KF-B selection and carriage accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit