Festo ADVUL-40-180-P-A Compact Cylinder | 40 mm Bore 180 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO ADVUL-40-180-P-A compact cylinder. The FESTO ADVUL-40-180-P-A is a double-acting compact cylinder with a 40 mm piston diameter, 180 mm stroke, and an anti-rotation piston rod guided by a rod and yoke plate. It delivers 754 N theoretical advance force at 6 bar and operates from 1 bar to 10 bar with elastic end-position cushioning. It is the longer-stroke variant of the ADVUL-40 series, used where the anti-rotation guide is needed over a 180 mm travel — lift and lower motions with an offset load, press-fit with a long insertion depth, and transfer slides where the load must not rotate.
Conatct For Details
DetailReview(0)Additional

Festo ADVUL-40-180-P-A Compact Cylinder | 40 mm Bore 180 mm

HYRIG can supply the FESTO ADVUL-40-180-P-A compact cylinder. The FESTO ADVUL-40-180-P-A is a double-acting compact cylinder with a 40 mm piston diameter, 180 mm stroke, and an anti-rotation piston rod guided by a rod and yoke plate. It delivers 754 N theoretical advance force at 6 bar and operates from 1 bar to 10 bar with elastic end-position cushioning. It is the longer-stroke variant of the ADVUL-40 series, used where the anti-rotation guide is needed over a 180 mm travel — lift and lower motions with an offset load, press-fit with a long insertion depth, and transfer slides where the load must not rotate.

Key Facts



Cylinder typeCompact cylinder, ADVUL series
Piston diameter40 mm
Stroke180 mm
Mode of operationDouble-acting
Anti-rotationGuided piston rod with yoke plate
Theoretical force at 6 bar754 N advance / 686 N return
Operating pressure1 bar … 10 bar
CushioningElastic, both ends
Impact energy in end positions0.52 J
Additional moving mass per 10 mm stroke17 g
Order code156205

Festo ADVUL-40 Model Specifications & Stroke Variants

ModelStrokeForce at 6 barImpact energyMoving mass per 10 mmOrder code
ADVUL-40-25-P-A25 mm754 N0.52 J—156888
ADVUL-40-180-P-A180 mm754 N0.52 J17 g156205

Explore the full range in the FESTO ADVUL compact cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
StandardISO 21287
Piston diameter40 mm
Stroke180 mm
Pneumatic connectionG1/8
Operating pressure1 bar … 10 bar
Impact energy in end positions0.52 J
CushioningElastic, both ends
Anti-rotationGuided piston rod with yoke plate
Additional moving mass per 10 mm stroke17 g
Operating temperature-20 °C … +80 °C

Structure / Working Principle

The ADVUL-40-180-P-A uses the same anti-rotation piston rod principle as the 25 mm stroke variant, but with a longer stroke. The piston rod is guided by an additional rod and a yoke plate, preventing rotation around the rod axis. On a 180 mm stroke, the guide also helps to resist bending moments that would otherwise deflect a standard piston rod over the longer travel.

The 40 mm bore produces 754 N theoretical advance force at 6 bar and 686 N return force, the same as the 25 mm stroke variant — the force depends on the piston area, not the stroke. The operating pressure range is 1 bar to 10 bar, and the elastic cushioning has an impact energy rating of 0.52 J. The additional moving mass per 10 mm stroke is 17 g, so the total moving mass increases with the stroke — confirm that the impact energy remains within the 0.52 J limit at the application velocity.

Cross-Reference & Replacement

Replacing a longer-stroke anti-rotation compact cylinder with the ADVUL-40-180-P-A? Check these four points:

  1. Bore and stroke: 40 mm / 180 mm — confirm the force and travel match the existing application.
  2. Anti-rotation: the ADVUL has a guided piston rod with a yoke plate. Confirm that the guide rod and yoke plate fit the existing mounting space, and that the additional length of the guide is accounted for in the machine envelope.
  3. Operating pressure: 1–10 bar — confirm that the supply pressure is within this range.
  4. Impact energy: 0.52 J per end position. On a 180 mm stroke, the moving mass is higher than on a 25 mm stroke, so the impact energy at a given velocity is higher. Confirm that the application velocity keeps the impact energy within 0.52 J; if not, consider a cylinder with adjustable cushioning.

For a broader replacement checklist, see the FESTO compact cylinder replacement guide.

Applications

  • Lift and lower motions with an offset load: where the load centre is not on the rod axis and the 180 mm travel requires the anti-rotation guide to prevent tilting.
  • Press-fit with a long insertion depth: where the press tool must stay aligned over a 180 mm stroke, and the guided rod prevents deflection.
  • Transfer slides with a rotating load risk: where the load would twist a standard piston rod over the longer travel, and the ADVUL guide keeps it aligned.
  • Replacement of existing ADVUL-40-180 units: in machinery with an ISO 21287 compact cylinder footprint and a 40 mm bore.

Selection Support

Not sure whether the 180 mm stroke covers your travel, or need the 25 mm variant for a shorter motion? Send your load, torque on the rod, required travel, supply pressure, impact velocity, and available space, and we will confirm the stroke and mounting accessories.

Frequently Asked Questions

Q: What is the theoretical force of the Festo ADVUL-40-180-P-A at 6 bar?
A: 754 N advance and 686 N return, based on the 40 mm piston area.

Q: What is the additional moving mass per 10 mm stroke?
A: 17 g per 10 mm stroke. At 180 mm, the moving mass is higher than at 25 mm, which affects the impact energy at a given velocity.

Q: Does the ADVUL-40-180-P-A have adjustable cushioning?
A: No. It uses elastic end-position cushioning with a 0.52 J impact energy rating. If adjustable cushioning is required, consider the DSBC series.

Q: What is the difference between ADVUL-40-25 and ADVUL-40-180?
A: Both have a 40 mm bore and deliver 754 N at 6 bar. The 180 mm variant has a longer stroke and higher moving mass. The anti-rotation guide is the same principle, but the longer stroke requires more careful attention to impact energy and mounting space.

Q: What is the lead time for Festo ADVUL-40-180-P-A?
A: Standard lead time is 3–4 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO ADVUL-40-180-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit