HYRIG can supply ADN, ADVU, and ADVUL compact cylinders as replacements for existing compact cylinders. This guide explains the five checkpoints that determine whether a Festo compact cylinder is a mechanical drop-in replacement, and where the configured interface may still differ. It covers bore and stroke, anti-rotation, operating pressure, mounting interface, and position sensing.
A compact cylinder is defined by its ISO 21287 body dimensions, but two compact cylinders with the same bore and stroke can still differ in the cushioning behaviour, the anti-rotation option, the port thread, and the sensor mounting. Those details determine whether the replacement can be installed without modifying the machine.
Confirm that the Festo compact cylinder matches the existing bore and stroke. The ADN, ADVU, and ADVUL families cover 25-40 mm bores and 25-180 mm strokes, but the stroke range depends on the family and the bore.
If the existing load would rotate a standard piston rod, choose the ADVUL family with the guided piston rod and yoke plate. If the load does not introduce torque, the ADN or ADVU standard compact cylinder is sufficient.
Confirm that the supply pressure is within the cylinder rating. The ADN operates from 0.6 bar, the ADVUL from 1 bar, and the ADVU from 1.2 bar. If the supply can drop below 1.2 bar, the ADVU may not operate reliably.
The ISO 21287 standard defines the compact cylinder body dimensions, so the Festo cylinder should bolt onto the same mounting bracket. However, the accessory part numbers may differ. Confirm the bracket, foot, and rod clevis part numbers before ordering.
Confirm the sensor mounting option. The compact cylinder body may or may not have a T-slot for proximity switches; if the existing cylinder uses position feedback, confirm the sensor mounting geometry before installation.
Not sure which Festo compact cylinder replaces your existing unit? Send the existing cylinder model number, the bore, the stroke, the anti-rotation requirement, the supply pressure, and the mounting bracket part number, and we will confirm the model code and any adapter required. Explore the compact cylinder ranges: Festo ADN compact cylinders, Festo ADVU compact cylinders, and Festo ADVUL compact cylinders.
Q: Is a Festo ADN a direct replacement for any compact cylinder?
A: No. The bore, stroke, anti-rotation, operating pressure, mounting interface, and sensor mounting must be verified before treating it as a drop-in replacement.
Q: What is the difference between ADN, ADVU, and ADVUL?
A: ADN operates from 0.6 bar with P-A cushioning; ADVU operates from 1.2 bar with a longer stroke range; ADVUL adds an anti-rotation piston rod.
Q: Can I replace a 1.2 bar ADVU with a 0.6 bar ADN?
A: Yes, if the bore and stroke match. The ADN has a lower pressure limit, so it can operate from a supply that would be below the ADVU minimum.
Q: What is the lead time for Festo compact cylinder replacements?
A: Standard lead time is 7-17 days from order confirmation, based on the quoted supply status.
Q: Does the compact cylinder replacement include the seal kit?
A: No. The seal kit is ordered separately. Confirm the cylinder model and the required seal kit before ordering.
For FESTO compact cylinder replacement verification and model code confirmation, contact HYRIG: info@hyrig.com.