Festo Mini Slide Replacement | DGST Checklist

2026-11-08 23:50

Festo Mini Slide Replacement | DGST Checklist

HYRIG can supply DGST mini slides as replacements for existing compact linear slides. This guide explains the five checkpoints that determine whether a Festo DGST is a mechanical drop-in replacement, and where the configured interface may still differ. It covers bore and stroke, guide type, torque limits, operating pressure, and position sensing.

Why Mini Slide Replacement Is Not Just Bore and Stroke

A mini slide combines a pneumatic piston with a ball bearing cage guide. The guide determines the repetition accuracy and the permissible torque, while the bore and stroke determine the force and travel. Two mini slides with the same bore and stroke can still differ in the guide type, the mounting hole pattern, and the maximum torque, so those details must be checked before the replacement can be installed.

Five-Point Replacement Checklist

1. Bore and Stroke

Confirm that the DGST matches the existing bore and stroke. The DGST-10 has a 10 mm bore and a 30 mm stroke; if the existing slide has a different bore or stroke, a different DGST variant or a larger slide is required.

2. Guide Type

The DGST offers a ball bearing cage guide (standard) and a recirculating ball bearing guide (Y12A variant). The ball bearing cage guide provides 0.3 mm repetition accuracy; the recirculating variant provides higher precision. If the existing application requires tighter positioning, confirm the guide type before ordering.

3. Torque Limits

Confirm the maximum torque Mz and My. The DGST-10-30-PA has 3 Nm for both Mz and My. If the load offset or lever arm produces a higher torque, a larger slide is required.

4. Operating Pressure

Confirm that the supply pressure is within the DGST range of 1-8 bar. If the supply exceeds 8 bar, a different slide series is required.

5. Position Sensing

Confirm the sensor mounting option. The DGST may not have the same sensor slot geometry as the existing slide. If the machine uses proximity switches, confirm the sensor mounting bracket and the switching point before installation.

Common Field Errors

  • Assuming all mini slides with the same bore are interchangeable. The guide type and torque limits can differ between variants.
  • Ignoring the torque limit. The DGST-10-30-PA has a 3 Nm limit; if the load offset exceeds this, the slide may wear prematurely or lose positioning accuracy.
  • Exceeding the 8 bar maximum pressure. The DGST is rated to 8 bar, lower than a standard cylinder; confirm the supply pressure before ordering.

Selection Support

Not sure which DGST mini slide replaces your existing unit? Send the existing slide model number, the bore, the stroke, the guide type, the load and torque, the supply pressure, and the sensor requirement, and we will confirm the model code and any adapter required. Explore the Festo DGST mini slide overview.

Frequently Asked Questions

Q: Is a Festo DGST a direct replacement for any mini slide?
A: No. The bore, stroke, guide type, torque limits, operating pressure, and sensor mounting must be verified before treating it as a drop-in replacement.

Q: What is the repetition accuracy of the DGST-10-30-PA?
A: 0.3 mm with the ball bearing cage guide. The recirculating ball bearing variant provides higher precision.

Q: What is the maximum torque of the DGST-10-30-PA?
A: 3 Nm for both Mz and My. Confirm that the load offset and lever arm produce a torque within these limits.

Q: What is the maximum operating pressure of the DGST?
A: 8 bar, lower than a standard cylinder (10-12 bar). Confirm that the supply pressure does not exceed 8 bar.

Q: What is the lead time for Festo DGST mini slide replacements?
A: Standard lead time is 7-17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO DGST mini slide replacement verification, contact HYRIG: info@hyrig.com.

Related Pages

Name:
Message:
Verification code:
Submit
Comment