Festo DGST-10-30-PA Mini Slide | 10 mm Bore 30 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO DGST-10-30-PA mini slide. The FESTO DGST-10-30-PA is a double-acting mini slide with a 10 mm piston diameter, 30 mm stroke, and a ball bearing cage guide. It delivers 94 N theoretical advance force and 79 N return force at 6 bar, operating from 1 bar to 8 bar. It is used for compact pick-and-place, transfer, and positioning tasks where a short stroke and a low-profile slide body fit into a tight machine envelope, and the ball bearing cage guide provides a repetition accuracy of 0.3 mm.
Conatct For Details
DetailReview(0)Additional

Festo DGST-10-30-PA Mini Slide | 10 mm Bore 30 mm

HYRIG can supply the FESTO DGST-10-30-PA mini slide. The FESTO DGST-10-30-PA is a double-acting mini slide with a 10 mm piston diameter, 30 mm stroke, and a ball bearing cage guide. It delivers 94 N theoretical advance force and 79 N return force at 6 bar, operating from 1 bar to 8 bar. It is used for compact pick-and-place, transfer, and positioning tasks where a short stroke and a low-profile slide body fit into a tight machine envelope, and the ball bearing cage guide provides a repetition accuracy of 0.3 mm.

Key Facts



Slide typeMini slide, DGST series
Piston diameter10 mm
Stroke30 mm
Mode of operationDouble-acting
Guide typeBall bearing cage guide
Theoretical force at 6 bar94 N advance / 79 N return
Operating pressure1 bar … 8 bar
Repetition accuracy0.3 mm
Max. torque Mz / My3 Nm / 3 Nm
Basic weight at 0 mm stroke171 g
Pneumatic connectionM5
Order code8085118

Festo DGST Mini Slide Model Specifications & Stroke Variants

ModelBoreStrokeForce at 6 bar advanceGuideBasic weightOrder code
DGST-10-30-PA10 mm30 mm94 NBall bearing cage171 g8085118
DGST-10-10-PA10 mm10 mm94 NBall bearing cage171 g—
DGST-10-30-Y12A10 mm30 mm94 NRecirculating ball bearing171 g—

Explore the full range in the FESTO DGST mini slide overview.

Data source: Technical data table.

Dimensions

ItemValue
Piston diameter10 mm
Stroke30 mm
Guide typeBall bearing cage guide
Operating pressure1 bar … 8 bar
Repetition accuracy0.3 mm
Max. torque Mz3 Nm
Max. torque My3 Nm
Basic weight at 0 mm stroke171 g
Moving mass157.7 g
Product weight315.4 g
Pneumatic connectionM5
CushioningElastic, both ends

Structure / Working Principle

The DGST series is a double-acting mini slide with a ball bearing cage guide. The piston drives a yoke that carries the slide carriage; the carriage runs on a ball bearing cage along the guide rail, providing low-friction linear motion with a repetition accuracy of 0.3 mm. The compact body is designed for tight spaces where a standard guided cylinder would be too large.

The 10 mm bore produces 94 N theoretical advance force and 79 N return force at 6 bar. The maximum torque Mz and My are both 3 Nm, which limits the offset load that the slide can handle. The moving mass is 157.7 g, and the total product weight is 315.4 g. The elastic cushioning at both ends absorbs the end-of-stroke impact without an adjustment screw. The M5 pneumatic connection matches the port size of small valves and fittings.

Cross-Reference & Replacement

Replacing a compact mini slide with the DGST-10-30-PA? Check these four points:

  1. Bore and stroke: 10 mm / 30 mm — confirm that the force and travel match the existing application.
  2. Guide type: ball bearing cage guide — repetition accuracy 0.3 mm. If the existing application requires higher precision, consider the recirculating ball bearing variant (Y12A).
  3. Torque limits: Mz and My are both 3 Nm. Confirm that the load offset and lever arm produce a torque within these limits.
  4. Operating pressure: 1–8 bar — confirm that the supply pressure is within this range. The maximum pressure is 8 bar, lower than a standard cylinder (10–12 bar).

For a broader replacement checklist, see the FESTO mini slide replacement guide.

Applications

  • Compact pick-and-place: moving small components from one position to another over a 30 mm stroke, where the 94 N force covers the load and the 0.3 mm repetition accuracy is sufficient.
  • Transfer slides in tight envelopes: where the low-profile DGST body fits into a machine frame that cannot accommodate a guided cylinder.
  • Positioning of small fixtures: moving a fixture or a sensor into position with a short, repeatable stroke.
  • Packaging and assembly machines: handling small cartons, trays, or components where the 3 Nm torque limit is not exceeded.

Selection Support

Not sure whether the 94 N force and 3 Nm torque limits cover your pick-and-place load, or need the recirculating ball bearing variant for higher precision? Send your load, offset distance, required repetition accuracy, supply pressure, and available space, and we will confirm the slide model and guide type.

Frequently Asked Questions

Q: What is the theoretical force of the Festo DGST-10-30-PA at 6 bar?
A: 94 N advance and 79 N return, based on the 10 mm piston area.

Q: What is the repetition accuracy of the DGST-10-30-PA?
A: 0.3 mm, based on the ball bearing cage guide. If higher precision is required, consider the recirculating ball bearing variant.

Q: What is the maximum torque Mz and My?
A: 3 Nm for both Mz and My. Confirm that the load offset and lever arm produce a torque within these limits.

Q: What is the maximum operating pressure?
A: 8 bar. This is lower than a standard cylinder (10–12 bar). Confirm that the supply pressure does not exceed 8 bar.

Q: What is the lead time for Festo DGST-10-30-PA?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO DGST-10-30-PA selection and guide type confirmation, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit