HYRIG can supply the FESTO DFSP-20-15-PS-PA stopper cylinder. The FESTO DFSP-20-15-PS-PA is a single-acting pulling stopper cylinder with a 20 mm piston diameter, 15 mm stroke, and elastic end-position cushioning. It delivers a 1370 N impact force and tolerates 228 N lateral force during switching, operating from 1.6 bar to 10 bar. It is the compact variant of the DFSP series, used on light-duty conveyor lines or where the available space limits the stopper size.
| Cylinder type | Stopper cylinder, DFSP series |
| Piston diameter | 20 mm |
| Stroke | 15 mm |
| Mode of operation | Single-acting, pulling |
| Cushioning | Elastic, both ends (PA) |
| Operating pressure | 1.6 bar … 10 bar |
| Impact force | 1370 N |
| Permissible lateral force during switching | 228 N |
| Max. cycle frequency | 5 Hz |
| Pneumatic connection | M5 |
| Position detection | For proximity switch (built-in magnet) |
| Weight | 0.22 kg |
| Order code | 576079 |
| Model | Bore | Stroke | Impact force | Lateral force | Weight | Order code |
|---|---|---|---|---|---|---|
| DFSP-20-15-PS-PA | 20 mm | 15 mm | 1370 N | 228 N | 0.22 kg | 576079 |
| DFSP-50-30-PS-PA | 50 mm | 30 mm | 6280 N | 1570 N | 1.2 kg | 576152 |
Explore the full range in the FESTO DFSP stopper cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Piston diameter | 20 mm |
| Stroke | 15 mm |
| Pneumatic connection | M5 |
| Mounting type | Through-hole, female thread, or accessories |
| Corrosion resistance class | KBK 2 (moderate) |
| Ambient temperature | -10 °C … +80 °C |
| Weight | 0.22 kg |
| Seals material | TPE-U(PU) |
| Piston rod material | High-alloy stainless steel |
| Cylinder tube material | Wrought aluminium alloy, smooth anodised |
The DFSP-20-15-PS-PA uses the same single-acting pulling principle as the larger 50 mm variant, but in a compact 20 mm body. Compressed air retracts the piston rod, pulling the stopper lever out of the workpiece path; a mechanical spring extends the rod back to the blocking position when the air is exhausted. The elastic cushioning absorbs the impact when the stopper extends into the path of a moving workpiece.
The 20 mm bore delivers a 1370 N impact force, which is lower than the 50 mm variant (6280 N) but sufficient for light-duty conveyors and small workpieces. The permissible lateral force during switching is 228 N, and the maximum cycle frequency is 5 Hz. The M5 pneumatic connection matches the port size of small valves and fittings. The built-in magnet allows proximity switch sensing of the piston position.
Replacing a compact stopper cylinder on a light-duty conveyor with the DFSP-20-15-PS-PA? Check these five points:
For a broader replacement checklist, see the FESTO stopper cylinder replacement guide.
Not sure whether the 1370 N impact force and 228 N lateral force cover your conveyor load, or need the 50 mm bore for heavier workpieces? Send your workpiece weight, conveyor speed, required cycle rate, supply pressure, and available space, and we will confirm the bore size and sensor configuration.
Q: What is the impact force of the Festo DFSP-20-15-PS-PA?
A: 1370 N, which is the maximum force the stopper can withstand when a workpiece hits it.
Q: What is the permissible lateral force during switching?
A: 228 N, which is the side load the stopper lever can tolerate while moving into position.
Q: What is the difference between DFSP-20-15 and DFSP-50-30?
A: The 20 mm bore delivers 1370 N impact force and 228 N lateral force; the 50 mm bore delivers 6280 N and 1570 N. The 20 mm variant is suitable for light-duty conveyors and small workpieces; the 50 mm variant is for heavier loads.
Q: Does the DFSP-20-15-PS-PA have a built-in magnet?
A: Yes. The cylinder is equipped with a built-in magnet, and the piston position can be detected with standard FESTO proximity switches.
Q: What is the lead time for Festo DFSP-20-15-PS-PA?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO DFSP-20-15-PS-PA selection and sensor configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.