HYRIG can supply the FESTO VMPA1-M1H-K-PI solenoid valve. The FESTO VMPA1-M1H-K-PI is a 2×3/2 normally closed monostable valve with a standard nominal flow rate of 230 l/min, a 10 mm valve width, and a 24 VDC solenoid. It is a compact valve slice for the VMPA valve terminal, used to control two independent single-acting actuators or two on/off functions where a narrow 10 mm slice is required and the flow demand is moderate.
| Valve function | 2×3/2, closed, monostable |
| Valve size | 10 mm |
| Standard nominal flow rate | 230 l/min |
| Operating pressure | 3 bar … 10 bar |
| Pilot pressure | 3 bar … 8 bar |
| Operating voltage | 24 VDC |
| Protection class | IP65 |
| Sealing principle | Soft |
| Product weight | 56 g |
| Order code | 533347 |
| Model | Function | Flow rate | Valve size | Pressure range | Order code |
|---|---|---|---|---|---|
| VMPA1-M1H-K-PI | 2×3/2 NC monostable | 230 l/min | 10 mm | 3-10 bar | 533347 |
| VMPA1-M1H-K-PI | 2×3/2 NC monostable | 230 l/min | 10 mm | 3-10 bar | 533347 |
Explore the full range in the FESTO VMPA valve terminal overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Valve size | 10 mm |
| Pneumatic connection | Sub-base, 10 mm |
| Electrical connection | Via valve terminal |
| Operating voltage | 24 VDC |
| Protection class | IP65 |
| Product weight | 56 g |
| Operating temperature | -5 °C … +50 °C |
| Media | Compressed air to ISO 8573-1:2010 [7:4:4] |
The VMPA1-M1H-K-PI is a 2×3/2 normally closed monostable valve. Each 3/2 section has its own solenoid and pneumatic spring; when energized, the section opens to supply the corresponding actuator port; when de-energized, the spring returns the spool and the port exhausts. The two sections operate independently, so one slice can control two separate single-acting cylinders or two pilot ports on a larger valve.
The 10 mm valve width is the narrowest VMPA1 slice, used where the valve terminal must fit into a compact control cabinet or a machine frame with limited space. The standard nominal flow rate is 230 l/min with QS-6 fittings. The soft sealing principle provides tighter shut-off than a hard-sealed spool valve. The operating pressure range is 3–10 bar, and the pilot pressure is 3–8 bar. Note that the valve is not suitable for vacuum — if the application requires vacuum control, choose a different valve series.
Not sure whether a 2×3/2 valve is the correct function for your two-actuator control, or need the 5/2 function for a double-acting cylinder? Send your actuator type, required fail-safe position, flow requirement, and valve terminal width, and we will confirm the valve function and flow rating.
Q: What is the flow rate of the Festo VMPA1-M1H-K-PI?
A: 230 l/min standard nominal flow rate with QS-6 fittings, per 3/2 section.
Q: What is the difference between 2×3/2 and 5/2 valve functions?
A: A 2×3/2 valve contains two independent 3/2 sections, each with its own solenoid and spring. It is used for two single-acting actuators or two independent on/off functions. A 5/2 valve is a single spool that connects a double-acting cylinder in both directions. They are not interchangeable for the same actuator.
Q: Can the VMPA1-M1H-K-PI be used for vacuum?
A: No. The valve is not suitable for vacuum. If the application requires vacuum control, choose a different valve series.
Q: What is the product weight of the VMPA1-M1H-K-PI?
A: 56 g, based on the valve body without manifold accessories.
Q: What is the lead time for Festo VMPA1-M1H-K-PI?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO VMPA1-M1H-K-PI selection and valve terminal configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.