HYRIG can supply the FESTO CPX-8DE digital input module. The FESTO CPX-8DE is an 8-channel digital input module for the CPX terminal, with PNP (positive switching) inputs, a 24 VDC nominal operating voltage (18–30 VDC range), and a 1 A maximum total input current per module. It is used to connect sensors and switches to the CPX terminal, so that the PLC or the valve terminal controller can read digital signals from the machine.
| Module type | Digital input module, CPX series |
| Number of inputs | 8 |
| Input characteristic | IEC 1131-T2 |
| Switching logic | PNP (positive switching) |
| Operating voltage | 24 VDC nominal (18–30 VDC) |
| Max. total input current per module | 1 A |
| Input filter time | 3 ms (0.1 / 3 / 10 / 20 ms parameterisable) |
| Protection class | IP20 (depends on connection block) |
| Dimensions (W×H×D) | 50 × 107 × 50 mm |
| Weight | 39 g |
| Order code | 195750 |
| Model | Inputs | Switching logic | Max. current per module | Order code |
|---|---|---|---|---|
| CPX-8DE | 8 | PNP | 1 A | 195750 |
| CPX-4DE | 4 | PNP | 0.7 A | — |
| CPX-8DE-D | 8 | PNP (channel diagnostics) | 0.7 A | — |
Explore the full range in the FESTO CPX terminal I/O module overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Width | 50 mm |
| Height | 107 mm |
| Depth | 50 mm |
| Weight | 39 g |
| Operating voltage range | 18 VDC … 30 VDC |
| Nominal operating voltage | 24 VDC |
| Internal current consumption at 24 V | Typ. 15 mA |
| Input switching level, signal 0 | ≤ 5 V |
| Input switching level, signal 1 | ≥ 11 V |
| Input filter time | 3 ms (0.1 / 3 / 10 / 20 ms parameterisable) |
| Max. total input current per module | 1 A |
| Ambient temperature | -5 °C … +50 °C |
| Housing material | Makrolon |
The CPX-8DE is a digital input module for the CPX terminal. It provides 8 PNP input channels, each of which reads a 24 VDC signal from a sensor or switch. The switching level is defined as signal 0 ≤ 5 V and signal 1 ≥ 11 V, which provides noise immunity for industrial environments. The input filter time is 3 ms by default but can be parameterised to 0.1, 3, 10, or 20 ms to match the sensor response time or to suppress contact bounce.
The module is mounted on the CPX terminal backplane and communicates with the terminal controller via the internal bus. The maximum total input current per module is 1 A, which limits the number of sensors that can be powered from the module. The IP20 protection class means the module must be installed inside a control cabinet or a protected enclosure. The module does not have channel-to-channel electrical isolation, so a common ground reference is required for all input signals.
Not sure whether the CPX-8DE is the correct input module for your sensor type (PNP vs NPN), or need the CPX-4DE for a smaller channel count? Send your sensor output type, number of input signals, input filter requirement, and CPX terminal configuration, and we will confirm the module variant and connection block.
Q: How many inputs does the Festo CPX-8DE have?
A: 8 digital inputs, with PNP (positive switching) logic and IEC 1131-T2 input characteristic.
Q: What is the operating voltage range of the CPX-8DE?
A: 18 VDC to 30 VDC, with a nominal voltage of 24 VDC.
Q: What is the maximum total input current per module?
A: 1 A. Confirm that the total current draw of all sensors connected to the module does not exceed this limit.
Q: Can the input filter time be adjusted?
A: Yes. The default filter time is 3 ms, and it can be parameterised to 0.1, 3, 10, or 20 ms to match the sensor response or suppress contact bounce.
Q: What is the protection class of the CPX-8DE?
A: IP20, which means the module must be installed inside a control cabinet or a protected enclosure.
Q: What is the lead time for Festo CPX-8DE?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO CPX-8DE selection and CPX terminal configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.