HYRIG can supply the FESTO DGST mini slide range and its variants. The DGST series is a double-acting mini slide with a ball bearing cage guide and a compact body for tight machine envelopes. It delivers 94 N theoretical advance force and 79 N return force at 6 bar and operates from 1 bar to 8 bar. The repetition accuracy is 0.3 mm, suitable for compact pick-and-place, transfer, and positioning tasks.
| Series | DGST, mini slide |
| Piston diameter | 10 mm |
| Stroke | 30 mm |
| Guide type | Ball bearing cage guide |
| Theoretical force at 6 bar | 94 N advance / 79 N return |
| Operating pressure | 1 bar … 8 bar |
| Repetition accuracy | 0.3 mm |
| Max. torque Mz / My | 3 Nm / 3 Nm |
| Model | Bore | Stroke | Force at 6 bar advance | Guide | Basic weight | Order code |
|---|---|---|---|---|---|---|
| DGST-10-30-PA | 10 mm | 30 mm | 94 N | Ball bearing cage | 171 g | 8085118 |
| DGST-10-10-PA | 10 mm | 10 mm | 94 N | Ball bearing cage | 171 g | — |
| DGST-10-30-Y12A | 10 mm | 30 mm | 94 N | Recirculating ball bearing | 171 g | — |
Data source: Technical data table.
The DGST series is a double-acting mini slide with a ball bearing cage guide. The piston drives a yoke that carries the slide carriage; the carriage runs on a ball bearing cage along the guide rail, providing low-friction linear motion with a repetition accuracy of 0.3 mm. The compact body is designed for tight spaces where a standard guided cylinder would be too large.
The 10 mm bore produces 94 N theoretical advance force and 79 N return force at 6 bar. The maximum torque Mz and My are both 3 Nm, which limits the offset load that the slide can handle. The elastic cushioning at both ends absorbs the end-of-stroke impact without an adjustment screw. The M5 pneumatic connection matches the port size of small valves and fittings.
Start with the available space: the DGST body is designed for tight envelopes where a standard guided cylinder would not fit. Next, confirm the load and torque: the max. torque Mz and My are both 3 Nm; if the load offset or lever arm produces a higher torque, a larger slide is required. Finally, confirm the repetition accuracy: the ball bearing cage guide provides 0.3 mm; if higher precision is required, the recirculating ball bearing variant (Y12A) should be considered.
Q: What is the theoretical force of the Festo DGST-10-30-PA at 6 bar?
A: 94 N advance and 79 N return, based on the 10 mm piston area.
Q: What is the repetition accuracy of the DGST-10-30-PA?
A: 0.3 mm, based on the ball bearing cage guide.
Q: What is the maximum torque Mz and My?
A: 3 Nm for both Mz and My. Confirm that the load offset and lever arm produce a torque within these limits.
Q: What is the maximum operating pressure?
A: 8 bar. This is lower than a standard cylinder (10-12 bar). Confirm that the supply pressure does not exceed 8 bar.
Q: What is the lead time for Festo DGST mini slides?
A: Standard lead time is 7-17 days from order confirmation, based on the quoted supply status.
For FESTO DGST mini slide selection and guide type confirmation, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.