HYRIG can supply the FESTO LFR filter regulator range and its variants. The LFR series combines a 5 μm filter element with a diaphragm-type pressure regulator in one body, removing condensate and particulate before setting the downstream pressure. It is available in MINI, MIDI, and MAXI sizes, with manual or fully automatic condensate drain. It is used at the inlet of a valve terminal or a machine section where the air supply is not already dried and filtered.
| Series | LFR, filter regulator |
| Sizes | MINI, MIDI, MAXI |
| Filtration grade | 5 μm |
| Adjustment range | 0.5 bar … 12 bar |
| Flow range | ~900 l/min (MINI) … 8000 l/min (MAXI) |
| Condensate drain | Manual or fully automatic (-A suffix) |
| Bowl material | Metal bowl guard or PC bowl |
| Model | Port | Filtration | Flow rate | Drain | Weight | Order code |
|---|---|---|---|---|---|---|
| LFR-1/2-D-5M-O-MIDI-A | G1/2 | 5 μm | 2600 l/min | Fully automatic | 900 g | 192625 |
| LFR-1-D-5M-O-MAXI-A | G1 | 5 μm | 8000 l/min | Fully automatic | 1470 g | 192629 |
| LFR-1/2-D-MIDI-A | G1/2 | 5 μm | 2600 l/min | Manual | 900 g | 186492 |
Data source: Technical data table.
The LFR series combines a 5 μm filter element with a diaphragm-type pressure regulator in one body. Air enters the filter bowl, where condensate and particulate are separated; the filtered air then passes through the regulator valve, which sets the downstream pressure. The fully automatic drain (suffix -A) opens when condensate reaches a set level, so the bowl does not need manual draining during operation.
The MIDI size uses a 55 mm grid dimension and provides a 2600 l/min flow rate. The MAXI size uses a 76 mm grid dimension and provides an 8000 l/min flow rate — more than three times the MIDI capacity. The 5 μm filtration grade removes most particles and coalesced oil droplets, but it is not a coalescing filter for oil-free air — confirm the air quality class if the application requires ISO 8573-1 [7:4:4] or better.
Start with the flow demand: the MIDI size (2600 l/min) covers most machine-level air preparation; the MAXI size (8000 l/min) is for main air lines and large valve terminals. Next, confirm the drain type: the -A suffix indicates a fully automatic drain, which is preferred where the bowl is not easily accessible; without the suffix, the drain is manual. Finally, confirm the air quality class: the 5 μm standard filter is suitable for general industrial air; if the application requires oil-free air, a coalescing filter may be needed.
Q: What is the difference between MINI, MIDI, and MAXI LFR sizes?
A: MINI has a 40 mm grid and ~900 l/min; MIDI has a 55 mm grid and 2600 l/min; MAXI has a 76 mm grid and 8000 l/min.
Q: What does the -A suffix mean on an LFR?
A: The -A suffix indicates a fully automatic condensate drain. Without the suffix, the drain is manual.
Q: What is the filtration grade of the standard LFR?
A: 5 μm. A 40 μm coarse filter is available for applications where finer filtration is not required.
Q: What is the adjustment range of the LFR filter regulator?
A: 0.5 bar to 12 bar, depending on the size and variant.
Q: What is the lead time for Festo LFR filter regulators?
A: Standard lead time is 2-3 weeks from order confirmation, based on the quoted supply status.
For FESTO LFR filter regulator selection and drain configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.