Festo LR Pressure Regulators | MINI, MIDI & MAXI Sizes

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO LR pressure regulator range and its variants. The LR series is a diaphragm-type pressure regulator without filtration, used where the air supply is already clean and dry and only the downstream pressure needs to be set. It is available in MINI (40 mm grid, 0.5-7 bar) and MIDI (55 mm grid, 0.5-12 bar) sizes.
Conatct For Details
DetailReview(0)Additional

Festo LR Pressure Regulators | MINI, MIDI & MAXI Sizes

HYRIG can supply the FESTO LR pressure regulator range and its variants. The LR series is a diaphragm-type pressure regulator without filtration, used where the air supply is already clean and dry and only the downstream pressure needs to be set. It is available in MINI (40 mm grid, 0.5-7 bar) and MIDI (55 mm grid, 0.5-12 bar) sizes.

Key Facts



SeriesLR, pressure regulator
SizesMINI, MIDI
Adjustment range0.5-7 bar (MINI) / 0.5-12 bar (MIDI)
Grid dimension40 mm (MINI) / 55 mm (MIDI)
Flow rate~900 l/min (MINI) / 3500 l/min (MIDI)
Housing materialDie-cast zinc / aluminium

LR Model Range & Specifications

ModelSizePortAdjustment rangeFlow rateWeightOrder code
LR-1/2-D-O-I-MIDIMIDIG1/20.5-12 bar3500 l/min660 g192322
LR-1/4-D-7-O-I-MINIMINIG1/40.5-7 bar~200 g162599
LR-3/8-D-O-I-MIDIMIDIG3/80.5-12 bar2800 l/min600 g192320

Data source: Technical data table.

Structure / Working Principle

The LR series is a diaphragm-type pressure regulator. Supply air enters the inlet port and passes through the valve seat; the downstream pressure acts on the diaphragm, which opposes the adjustable spring. Turning the knob changes the spring force, setting the downstream pressure. When the downstream pressure exceeds the setpoint, the diaphragm moves and reduces the valve opening, maintaining the set pressure.

The MINI size uses a 40 mm grid dimension, suitable for point-of-use regulation where panel space is limited. The MIDI size uses a 55 mm grid dimension and provides a 3500 l/min flow rate, covering main air lines feeding a valve terminal or a group of cylinders. The regulator does not include a pressure gauge by default — confirm the gauge port and whether a gauge is required for your installation.

Selecting the Right LR Pressure Regulator

Start with the flow demand: the MINI size covers point-of-use regulation on small machines; the MIDI size covers main air lines up to 3500 l/min. Next, confirm the adjustment range: the MINI is limited to 7 bar; if the downstream pressure requires up to 12 bar, choose the MIDI. Finally, confirm whether filtration is needed: if the air supply contains condensate or particulate, choose an LFR filter regulator instead of a plain LR regulator.

Frequently Asked Questions

Q: What is the difference between LR and LFR?
A: LR is a pressure regulator without filtration. LFR combines a 5 μm filter and a pressure regulator in one body. Choose LFR when the air supply requires filtration before regulation.

Q: What is the adjustment range of the LR-1/2-D-O-I-MIDI?
A: 0.5 bar to 12 bar, with a 3500 l/min standard nominal flow rate.

Q: Does the LR regulator come with a pressure gauge?
A: No. The regulator is supplied without a pressure gauge by default. Confirm the gauge port and whether a gauge is required for your installation.

Q: What is the grid dimension of the MIDI size?
A: 55 mm. This is the panel footprint used to match the regulator with other air preparation components in the same size class.

Q: What is the lead time for Festo LR pressure regulators?
A: Standard lead time is 2-3 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO LR pressure regulator selection and gauge configuration, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit