Festo LOE Lubricators | Proportional Oil Mist for FRL Units

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO LOE proportional oil mist lubricator range and its variants. The LOE series adds oil mist lubrication to an air preparation unit, where downstream equipment such as pneumatic tools or legacy cylinders requires lubricated air. It is available in MIDI size with a 110 cm³ bowl, and the installation position must be vertical within ±5° for the proportional metering to work correctly.
Conatct For Details
DetailReview(0)Additional

Festo LOE Lubricators | Proportional Oil Mist for FRL Units

HYRIG can supply the FESTO LOE proportional oil mist lubricator range and its variants. The LOE series adds oil mist lubrication to an air preparation unit, where downstream equipment such as pneumatic tools or legacy cylinders requires lubricated air. It is available in MIDI size with a 110 cm³ bowl, and the installation position must be vertical within ±5° for the proportional metering to work correctly.

Key Facts



SeriesLOE, proportional oil mist lubricator
SizesMIDI
Port threadG1/2
Oil capacity110 cm³
Installation positionVertical ±5°
Bowl materialMetal bowl guard / PC bowl
Operating temperature-10 °C … +60 °C

LOE Model Range & Specifications

ModelPortOil capacitySizeWeightOrder code
LOE-D-MIDIG1/2110 cm³MIDI630 g192576
LOE-1/2-D-MIDIG1/2110 cm³MIDI630 g159587

Data source: Technical data table.

Structure / Working Principle

The LOE series is a proportional oil mist lubricator. Air flows through the lubricator body and picks up oil from the bowl via a metering system; the oil is atomized into a fine mist and carried downstream to the tools or cylinders. The oil feed rate is adjusted by a metering screw, so the lubricant delivery can be matched to the air consumption. The installation position must be vertical within ±5° for the proportional metering to work correctly.

The MIDI size uses a 55 mm grid dimension, matching the LR and LFR regulators. The 110 cm³ bowl provides a reasonable refill interval for most machine applications. Lubrication is only necessary when the downstream equipment requires it — many modern cylinders and valves are designed for oil-free air, so confirm the equipment requirement before adding a lubricator to the air preparation unit.

Selecting the Right LOE Lubricator

Start with the equipment requirement: only add a lubricator if the downstream tools or cylinders are specified for lubricated air. Once lubricated air is used, the system must continue with lubricated air. Next, confirm the size: the MIDI size (110 cm³, G1/2) matches the LR and LFR regulators in the same size class. Finally, confirm the installation position: the LOE must be mounted vertically within ±5°; a horizontal installation will not meter correctly.

Frequently Asked Questions

Q: What is the oil capacity of the Festo LOE MIDI lubricator?
A: 110 cm³, with a G1/2 port and a 55 mm grid dimension.

Q: Does the LOE lubricator come with oil?
A: No. The lubricator is supplied without oil. Use a compatible pneumatic lubricant and confirm the oil type with the downstream equipment manufacturer.

Q: Is lubrication always required for pneumatic cylinders?
A: No. Many modern FESTO cylinders and valves are designed for oil-free air. Once lubricated air is used, the system must continue with lubricated air.

Q: What is the installation position requirement?
A: Vertical within ±5°. A horizontal installation will not meter the oil correctly.

Q: What is the lead time for Festo LOE lubricators?
A: Standard lead time is 2-3 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO LOE lubricator selection and oil type confirmation, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit