Festo LOE-1/2-D-MIDI Lubricator | G1/2, 110 cm³

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO LOE-1/2-D-MIDI lubricator. The FESTO LOE-1/2-D-MIDI is a MIDI-size proportional oil mist lubricator with a G1/2 port and a 110 cm³ oil capacity. It is used in air preparation units where pneumatic tools or legacy equipment require lubricated air, and the MIDI body size matches the LR and LFR regulators in the same size class.
Conatct For Details
DetailReview(0)Additional

Festo LOE-1/2-D-MIDI Lubricator | G1/2, 110 cm³

HYRIG can supply the FESTO LOE-1/2-D-MIDI lubricator. The FESTO LOE-1/2-D-MIDI is a MIDI-size proportional oil mist lubricator with a G1/2 port and a 110 cm³ oil capacity. It is used in air preparation units where pneumatic tools or legacy equipment require lubricated air, and the MIDI body size matches the LR and LFR regulators in the same size class.

Key Facts



Lubricator typeProportional oil mist lubricator, LOE series
SizeMIDI
Port threadG1/2
Oil capacity110 cm³
Grid dimension55 mm
Product weight630 g
Order code159587

Festo LOE Series MIDI Model Specifications & Variants

ModelPortOil capacitySizeWeightOrder code
LOE-1/2-D-MIDIG1/2110 cm³MIDI630 g159587
LOE-D-MIDIG1/2110 cm³MIDI630 g192576

Explore the full range in the FESTO LOE lubricator overview.

Data source: Technical data table.

Dimensions

ItemValue
Grid dimension55 mm
Port threadG1/2
Bowl materialMetal bowl guard / PC bowl
Max. oil capacity110 cm³
Product weight630 g
Installation positionVertical ±5°
Ambient temperature-10 °C … +60 °C

Structure / Working Principle

The LOE series is a proportional oil mist lubricator. Air flows through the lubricator body and picks up oil from the bowl via a metering system; the oil is atomized into a fine mist and carried downstream to the tools or cylinders. The oil feed rate is adjusted by a metering screw, so the lubricant delivery can be matched to the air consumption. The installation position must be vertical within ±5° for the proportional metering to work correctly.

The MIDI size uses a 55 mm grid dimension, matching the LR and LFR regulators. The 110 cm³ bowl provides a reasonable refill interval for most machine applications. Lubrication is only necessary when the downstream equipment requires it — many modern cylinders and valves are designed for oil-free air, so confirm the equipment requirement before adding a lubricator to the air preparation unit.

Applications

  • Pneumatic tools: where impact wrenches, grinders, or air motors require oil mist lubrication and the air preparation unit is MIDI size.
  • Legacy cylinders and valves: where older equipment is specified for lubricated air, and the lubrication must be continuous.
  • Machine sections with mixed air demand: where part of the machine requires lubrication and the lubricator is installed only on that branch.
  • Panel builders and OEM machine assembly: where a MIDI-size lubricator matches the existing LR or LFR regulator.

Selection Support

Not sure whether your downstream equipment requires lubrication, or need the matching LR or LFR regulator in the same MIDI size? Send your equipment air requirement, flow demand, oil feed rate, and panel space, and we will confirm the lubricator configuration and oil type.

Frequently Asked Questions

Q: What is the oil capacity of the Festo LOE-1/2-D-MIDI?
A: 110 cm³, with a G1/2 port and a 55 mm grid dimension.

Q: Does the LOE-1/2-D-MIDI come with oil?
A: No. The lubricator is supplied without oil. Use a compatible pneumatic lubricant and confirm the oil type with the downstream equipment manufacturer.

Q: What is the difference between LOE-1/2-D-MIDI and LOE-D-MIDI?
A: Both are MIDI-size lubricators with a 110 cm³ bowl. The LOE-1/2-D-MIDI uses a G1/2 port designation; the LOE-D-MIDI is the base model. Confirm the port thread and the bowl material before ordering.

Q: Is lubrication always required for pneumatic cylinders?
A: No. Many modern FESTO cylinders and valves are designed for oil-free air. Once lubricated air is used, the system must continue with lubricated air. Confirm the equipment requirement before adding a lubricator.

Q: What is the lead time for Festo LOE-1/2-D-MIDI?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO LOE-1/2-D-MIDI selection and oil type confirmation, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit