HYRIG can supply the FESTO SMT-8M-A-PS-24V-E-0,3-M8D proximity sensor. The FESTO SMT-8M-A-PS-24V-E-0,3-M8D is a magnetoresistive proximity sensor for T-slot cylinders, with a PNP normally-open output, a 5–30 VDC operating voltage range, and a 0.3 m cable terminating in an M8x1 A-coded plug. It is used to detect the piston position in DSBC, ADN, and other T-slot cylinders, providing a switching signal for sequence control or end-of-stroke confirmation.
| Sensor type | Magnetoresistive proximity sensor |
| Mounting | T-slot |
| Output function | PNP, normally open (NO) |
| Operating voltage | 5 VDC … 30 VDC |
| Electrical connection | M8x1 A-coded plug, 0.3 m cable |
| Max. switching frequency | 180 Hz |
| Repetition accuracy | 0.2 mm |
| Protection class | IP65 / IP68 / IP69K |
| Product weight | 8.9 g |
| Order code | 574334 |
| Model | Output | Connection | Cable length | Order code |
|---|---|---|---|---|
| SMT-8M-A-PS-24V-E-0,3-M8D | PNP-NO | M8x1 plug | 0.3 m | 574334 |
| SMT-8M-A-PS-24V-E-0,3-M12 | PNP-NO | M12 plug | 0.3 m | 574337 |
Explore the full range in the FESTO SMT-8M proximity sensor overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Mounting type | T-slot, insertable from above |
| Electrical connection | M8x1, A-coded to EN 61076-2-104 |
| Cable length | 0.3 m |
| Operating voltage | 5 VDC … 30 VDC |
| Output function | PNP, normally open |
| Max. switching frequency | 180 Hz |
| Repetition accuracy | 0.2 mm |
| Max. tightening torque | 0.6 Nm |
| Protection class | IP65 / IP68 / IP69K |
| Product weight | 8.9 g |
The SMT-8M-A is a magnetoresistive sensor that detects the magnetic field of the piston magnet through the cylinder wall. It is inserted into the T-slot from above and secured with a screw; the magnetoresistive element provides a stable switching signal without contact wear. The PNP normally-open output means the sensor conducts when the piston magnet is in the sensing range, and the signal is available on the M8x1 plug.
The 180 Hz maximum switching frequency is higher than the M12 variant (130 Hz), making it suitable for higher-speed cylinder cycles. The 0.3 m cable with M8x1 plug is the compact connector standard, used where the junction box or valve terminal has M8 inputs. The IP69K protection class covers high-pressure washdown, making the sensor suitable for food and beverage or pharmaceutical applications where aggressive cleaning is required.
Not sure whether the PNP-NO output matches your PLC input, or need the M12 plug variant for a different connector standard? Send your PLC input type, connector standard, cable length requirement, and cylinder model, and we will confirm the sensor output and connection.
Q: What is the output type of the Festo SMT-8M-A-PS-24V-E-0,3-M8D?
A: PNP, normally open (NO), with a 5–30 VDC operating voltage range.
Q: What is the maximum switching frequency of this sensor?
A: 180 Hz, based on the magnetoresistive sensing element. This is higher than the M12 variant (130 Hz).
Q: What is the protection class of the SMT-8M-A-PS-24V-E-0,3-M8D?
A: IP65 / IP68 / IP69K, covering high-pressure washdown for food, beverage, and pharmaceutical applications.
Q: What is the difference between M8 and M12 connector variants?
A: The M8 variant uses a smaller M8x1 plug and has a 180 Hz switching frequency. The M12 variant uses a larger M12 plug and has a 130 Hz switching frequency. The choice depends on the existing connector standard and the required cycle speed.
Q: What is the lead time for Festo SMT-8M-A-PS-24V-E-0,3-M8D?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO SMT-8M-A-PS-24V-E-0,3-M8D selection and connector configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.