HYRIG can supply the FESTO SMT-8M magnetoresistive proximity sensor range and its variants. The SMT-8M series is a solid-state sensor for T-slot cylinders, with a PNP normally-open output, a 5-30 VDC operating voltage range, and either an M8 or M12 plug. It is used to detect the piston position in DSBC, ADN, and other T-slot cylinders, providing a switching signal for sequence control or end-of-stroke confirmation.
| Series | SMT-8M, magnetoresistive proximity sensor |
| Mounting | T-slot |
| Output function | PNP, normally open (NO) |
| Operating voltage | 5 VDC … 30 VDC |
| Electrical connection | M8x1 or M12x1 plug, 0.3 m cable |
| Max. switching frequency | 130 Hz (M12) / 180 Hz (M8) |
| Protection class | IP65 / IP68 / IP69K |
| Model | Output | Connection | Cable length | Switching frequency | Order code |
|---|---|---|---|---|---|
| SMT-8M-A-PS-24V-E-0,3-M12 | PNP-NO | M12 plug | 0.3 m | 130 Hz | 574337 |
| SMT-8M-A-PS-24V-E-0,3-M8D | PNP-NO | M8 plug | 0.3 m | 180 Hz | 574334 |
Data source: Technical data table.
The SMT-8M-A is a magnetoresistive sensor that detects the magnetic field of the piston magnet through the cylinder wall. It is inserted into the T-slot from above and secured with a screw; the magnetoresistive element provides a stable switching signal without contact wear. The PNP normally-open output means the sensor conducts when the piston magnet is in the sensing range, and the signal is available on the M8 or M12 plug.
The M8 variant has a 180 Hz maximum switching frequency, higher than the M12 variant (130 Hz). The 0.3 m cable with plug is the compact connector standard, used where the junction box or valve terminal has M8 or M12 inputs. The IP69K protection class covers high-pressure washdown, making the sensor suitable for food and beverage or pharmaceutical applications where aggressive cleaning is required.
Start with the connector standard: M8x1 for compact wiring, M12x1 for the more common industrial connector. Next, confirm the switching frequency: the M8 variant supports 180 Hz, the M12 variant 130 Hz; for high-speed cylinder cycles, the M8 variant may be required. Finally, confirm the protection class: the standard SMT-8M is rated IP65/IP68/IP69K, suitable for washdown environments.
Q: What is the output type of the Festo SMT-8M?
A: PNP, normally open (NO), with a 5-30 VDC operating voltage range.
Q: What is the difference between M8 and M12 connector variants?
A: The M8 variant uses a smaller M8x1 plug and has a 180 Hz switching frequency. The M12 variant uses a larger M12 plug and has a 130 Hz switching frequency.
Q: What is the protection class of the SMT-8M?
A: IP65 / IP68 / IP69K, covering high-pressure washdown for food, beverage, and pharmaceutical applications.
Q: What is the difference between SMT-8M and SME-8?
A: SMT-8M is a magnetoresistive sensor with a solid-state PNP or NPN output. SME-8 is a reed-type sensor with a contact output.
Q: What is the lead time for Festo SMT-8M sensors?
A: Standard lead time is 7-17 days from order confirmation, based on the quoted supply status.
For FESTO SMT-8M sensor selection and connector configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.