HYRIG can supply the FESTO LFR-1-D-5M-O-MAXI-A filter regulator. The FESTO LFR-1-D-5M-O-MAXI-A is a MAXI-size filter regulator with a G1 port, 5 μm filtration, a 0.5–12 bar adjustment range, and an 8000 l/min standard nominal flow rate. It combines filtration and pressure regulation in one body, with a fully automatic condensate drain (suffix -A). It is used at the inlet of a large valve terminal or a main air line where the flow demand exceeds the MIDI size capacity.
| Regulator type | Filter regulator, LFR series |
| Size | MAXI |
| Port thread | G1 |
| Filtration grade | 5 μm |
| Adjustment range | 0.5 bar … 12 bar |
| Standard nominal flow rate | 8000 l/min |
| Condensate drain | Fully automatic |
| Product weight | 1470 g |
| Order code | 192629 |
| Model | Port | Filtration | Flow rate | Drain | Weight | Order code |
|---|---|---|---|---|---|---|
| LFR-1-D-5M-O-MAXI-A | G1 | 5 μm | 8000 l/min | Fully automatic | 1470 g | 192629 |
| LFR-1/2-D-5M-O-MIDI-A | G1/2 | 5 μm | 2600 l/min | Fully automatic | 900 g | 192625 |
Explore the full range in the FESTO LFR filter regulator overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Grid dimension | 76 mm |
| Port thread | G1 |
| Bowl material | Metal bowl guard |
| Max. condensate volume | 80 ml |
| Product weight | 1470 g |
| Mounting type | With accessories |
| Ambient temperature | 5 °C … 60 °C |
The LFR-1-D-5M-O-MAXI-A combines a 5 μm filter element with a diaphragm-type pressure regulator in a MAXI-size body. Air enters the filter bowl, where condensate and particulate are separated; the filtered air then passes through the regulator valve, which sets the downstream pressure. The fully automatic drain opens when condensate reaches a set level, so the bowl does not need manual draining during operation.
The MAXI size uses a 76 mm grid dimension, wider than the MIDI size (55 mm), and provides an 8000 l/min standard nominal flow rate — more than three times the MIDI capacity. This makes it suitable for main air lines feeding multiple valve terminals or a large actuator bank. The 5 μm filtration grade removes most particles and coalesced oil droplets, but it is not a coalescing filter for oil-free air — confirm the air quality class if the application requires ISO 8573-1 [7:4:4] or better.
Not sure whether the 8000 l/min flow rate and 5 μm filtration meet your main air line requirement, or need the MIDI size for a smaller flow? Send your flow demand, air quality class, condensate load, and panel space, and we will confirm the filter regulator configuration.
Q: What is the flow rate of the Festo LFR-1-D-5M-O-MAXI-A?
A: 8000 l/min standard nominal flow rate, with a 0.5–12 bar adjustment range and 5 μm filtration.
Q: What does the "-A" suffix mean on the LFR-1-D-5M-O-MAXI-A?
A: The "-A" suffix indicates a fully automatic condensate drain. Without the suffix, the drain is manual.
Q: What is the difference between MAXI and MIDI filter regulators?
A: MAXI has a G1 port, a 76 mm grid, and an 8000 l/min flow rate. MIDI has a G1/2 port, a 55 mm grid, and a 2600 l/min flow rate. Choose MAXI for main air lines and large valve terminals.
Q: What is the maximum condensate volume of the MAXI size?
A: 80 ml. The fully automatic drain opens when condensate reaches the set level.
Q: What is the lead time for Festo LFR-1-D-5M-O-MAXI-A?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.
For FESTO LFR-1-D-5M-O-MAXI-A selection and drain configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.