Festo Air Preparation | Filters, Regulators, Lubricators

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO air preparation range, covering filter regulators (LFR), pressure regulators (LR), lubricators (LOE), and pressure gauges (MA). The components are available in MINI (40 mm grid), MIDI (55 mm grid), and MAXI (76 mm grid) sizes, so a complete FRL unit can be assembled for flow rates from a few hundred litres per minute up to 8000 l/min. This overview groups the main component types and helps match the size to the air demand.
Conatct For Details
DetailReview(0)Additional

Festo Air Preparation | Filters, Regulators, Lubricators

HYRIG can supply the FESTO air preparation range. This overview groups the main component types — filter regulators (LFR), pressure regulators (LR), lubricators (LOE), and pressure gauges (MA) — and helps match the size to the air demand. Specific models and dimensions are covered on the individual model pages.

Key Facts



Component typesFilter regulator (LFR), pressure regulator (LR), lubricator (LOE), pressure gauge (MA)
SizesMINI (40 mm), MIDI (55 mm), MAXI (76 mm)
Flow range~200 l/min (MINI) … 8000 l/min (MAXI)
Pressure range0.5–7 bar (MINI), 0.5–12 bar (MIDI/MAXI)
Filtration grades5 μm (standard), 40 μm (coarse)
Drain optionsManual, fully automatic (-A suffix)

Component Type Comparison

ComponentFunctionWhen to useExample model
LFR (filter regulator)Filtration + pressure regulationAir supply contains condensate or particulate; downstream pressure must be setLFR-1/2-D-5M-O-MIDI-A
LR (pressure regulator)Pressure regulation onlyAir supply is already clean and dry; only pressure needs to be setLR-1/2-D-O-I-MIDI
LOE (lubricator)Oil mist lubricationDownstream equipment requires lubricated air (legacy tools, air motors)LOE-1/2-D-MIDI
MA (pressure gauge)Local pressure indicationOperator needs a visual reading of line pressureMA-63-10-R1/4-E-RG

Data source: Technical data table.

Size Selection

The MINI size (40 mm grid) is used for point-of-use regulation on small valve terminals or individual machines, with a 0.5–7 bar range. The MIDI size (55 mm grid) is the most common choice for machine-level air preparation, with a 0.5–12 bar range and flow rates up to ~3500 l/min. The MAXI size (76 mm grid) is used for main air lines and large valve terminals, with flow rates up to 8000 l/min.

If the air supply contains condensate or particulate, choose an LFR filter regulator rather than a plain LR regulator — the LFR combines filtration and regulation in one body. If the downstream equipment requires lubrication, add an LOE lubricator after the regulator. Most modern FESTO cylinders and valves are designed for oil-free air, so confirm the equipment requirement before adding a lubricator.

Selection Support

Not sure which air preparation size and component combination matches your flow demand and air quality requirement? Send your flow rate, supply pressure, required downstream pressure, air quality class, and panel space, and we will confirm the component sizes and drain configuration. Explore the FESTO LFR filter regulator overview for the filter regulator range, or the FESTO LR pressure regulator overview for the regulator-only range.

Frequently Asked Questions

Q: What is the difference between LR and LFR?
A: LR is a pressure regulator without filtration. LFR combines a 5 μm filter and a pressure regulator in one body. Choose LFR when the air supply requires filtration before regulation.

Q: Which size should I choose — MINI, MIDI, or MAXI?
A: MINI for point-of-use regulation on small machines (up to ~7 bar), MIDI for machine-level air preparation (up to ~3500 l/min, 12 bar), MAXI for main air lines and large valve terminals (up to 8000 l/min).

Q: Do I need a lubricator?
A: Only if the downstream equipment requires lubricated air. Many modern FESTO cylinders and valves are designed for oil-free air. Once lubricated air is used, the system must continue with lubricated air.

Q: What does the "-A" suffix mean on an LFR?
A: The "-A" suffix indicates a fully automatic condensate drain. Without the suffix, the drain is manual.

Q: What is the filtration grade of the standard LFR?
A: 5 μm. A 40 μm coarse filter is available for applications where finer filtration is not required.

Contact

For FESTO air preparation component selection and size confirmation, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit