Festo ADVU Compact Cylinders | ISO 21287 Range

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO ADVU ISO 21287 compact cylinder range and its variants. The ADVU series is a double-acting compact cylinder family with bore sizes from 32 mm to 40 mm, strokes from 50 mm to 100 mm, and P-A elastic end-position cushioning. It is used where a longer stroke is needed in a compact body — transfer slides, lift motions, and machine envelopes that cannot accommodate an ISO 15552 cylinder. The 1.2 bar lower pressure limit means the supply pressure must remain at or above 1.2 bar for reliable operation.
Conatct For Details
DetailReview(0)Additional

Festo ADVU Compact Cylinders | ISO 21287 Range

HYRIG can supply the FESTO ADVU ISO 21287 compact cylinder range and its variants. The ADVU series is a double-acting compact cylinder family with bore sizes from 32 mm to 40 mm, strokes from 50 mm to 100 mm, and P-A elastic end-position cushioning. It is used where a longer stroke is needed in a compact body — transfer slides, lift motions, and machine envelopes that cannot accommodate an ISO 15552 cylinder. The 1.2 bar lower pressure limit means the supply pressure must remain at or above 1.2 bar for reliable operation.

Key Facts



SeriesADVU, compact cylinder
StandardISO 21287
Bore range32 mm, 40 mm
Stroke range50 mm, 100 mm
Operating pressure1.2 bar … 10 bar
CushioningP-A elastic, both ends
Position sensingMagnetic piston and sensor slots
Force at 6 bar483 N, 754 N advance

ADVU Model Range & Specifications

ModelBoreStrokeTheoretical force at 6 barPortOrder code
ADVU-32-100-P-A32 mm100 mm483 NG1/8156004
ADVU-40-50-P-A40 mm50 mm754 NG1/8—

Data source: Technical data table.

Structure / Working Principle

The ADVU series uses a compact cylinder body with P-A elastic end-position cushioning. The 32 mm bore produces 483 N at 6 bar; the 40 mm bore produces 754 N. The ADVU body is designed for longer strokes than the ADN series in a compact envelope, but the lower pressure limit is 1.2 bar, higher than the ADN 0.6 bar minimum.

If the supply pressure can drop below 1.2 bar, the ADVU may not extend or retract fully. In that case, choose the ADN series for 0.6 bar capability, but note that the ADN stroke range is shorter. The ADVU is the correct choice when the supply pressure is stable above 1.2 bar and the application needs a 50-100 mm stroke in a compact body.

Applications

  • Transfer slides with longer travel: where a 50-100 mm stroke is needed to move a part from one station to the next, and the compact body fits the available space.
  • Lift and lower motions: where the 32 mm or 40 mm bore provides sufficient force over a 50-100 mm vertical travel.
  • Compact machine envelopes: where an ISO 15552 cylinder of the same bore and stroke would be too long, and the ADVU body fits the frame depth.
  • Supply pressure above 1.2 bar: the ADVU is suitable when the minimum supply pressure is at least 1.2 bar; for lower pressures, choose the ADN series.

Selection Support

Not sure whether the 1.2 bar lower pressure limit matches your supply stability, or need the ADN series for 0.6 bar capability? Send your supply pressure range, stroke requirement, load, and available space, and we will confirm the cylinder model and pressure compatibility. Explore related models: ADVU-32-100-P-A and ADVU-40-50-P-A.

Related Pages

Frequently Asked Questions

Q: What is the operating pressure range of the Festo ADVU series?
A: 1.2 bar to 10 bar, with 483 N to 754 N theoretical force at 6 bar depending on bore.

Q: What is the difference between ADVU and ADN compact cylinders?
A: ADVU has a 1.2 bar lower pressure limit and a body designed for longer strokes; ADN has a 0.6 bar lower pressure limit and a shorter stroke range.

Q: Can the ADVU series operate below 1.2 bar?
A: No. The minimum operating pressure is 1.2 bar. If the supply can drop below 1.2 bar, choose the ADN series.

Q: Does the ADVU series have adjustable cushioning?
A: No. ADVU uses P-A elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series.

Q: What is the lead time for Festo ADVU compact cylinders?
A: Standard lead time is 7-17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO ADVU compact cylinder selection and mounting accessories, contact HYRIG: info@hyrig.com.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit