HYRIG can supply the FESTO ADVU-40-50-P-A compact cylinder. The FESTO ADVU-40-50-P-A is a double-acting compact cylinder with a 40 mm piston diameter, 50 mm stroke, and elastic end-position cushioning, delivering 754 N theoretical force at 6 bar. It combines the higher force of the 40 mm bore with a 50 mm stroke in a compact ADVU body — used for press-fit, clamp, and transfer motions where more force than the 32 mm bore is needed, and the travel is beyond the 25 mm ADN-40 stroke.
| Piston diameter | 40 mm |
| Stroke | 50 mm |
| Mode of operation | Double-acting |
| Cushioning | Elastic, both ends |
| Operating pressure | 1.2 bar … 10 bar |
| Theoretical force at 6 bar | 754 N advance |
| Pneumatic connection | G 1/8 |
| Standard | ISO 21287 |
| Model | Bore | Stroke | Theoretical force at 6 bar | Pressure range |
|---|---|---|---|---|
| ADVU-32-100-P-A | 32 mm | 100 mm | 483 N | 1.2-10 bar |
| ADVU-40-50-P-A | 40 mm | 50 mm | 754 N | 1.2-10 bar |
Explore the full range in the FESTO ADVU compact cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Mounting standard | ISO 21287 |
| Piston diameter | 40 mm |
| Stroke | 50 mm |
| Pneumatic connection | G 1/8 |
| Cushioning | Elastic, both ends |
| Operating pressure | 1.2 bar … 10 bar |
| Ambient temperature | -20 °C … +80 °C |
The ADVU-40-50-P-A uses the ADVU compact cylinder body with a 40 mm bore and 50 mm stroke. The 40 mm bore produces 754 N theoretical advance force at 6 bar, the same piston area as the ADN-40-25, but the ADVU body allows a 50 mm stroke in a compact envelope. The ADVU body is shorter than an ISO 15552 cylinder of the same bore and stroke.
The 1.2 bar lower pressure limit means the ADVU requires a minimum supply pressure of 1.2 bar. If the supply can drop below 1.2 bar, the cylinder may not extend or retract fully — choose the ADN-40-25 for 0.6 bar capability, but note that the ADN-40-25 stroke is limited to 25 mm. The G 1/8 port provides sufficient flow for the 40 mm bore over the 50 mm stroke, and the elastic cushioning absorbs the end-of-stroke impact.
Not sure whether the 1.2 bar lower pressure limit matches your supply stability, or need the ADN-40-25 for 0.6 bar capability with a shorter stroke? Send your supply pressure range, stroke requirement, load, and available space, and we will confirm the cylinder model and pressure compatibility.
Q: What is the operating pressure range of the Festo ADVU-40-50-P-A?
A: 1.2 bar to 10 bar, with a theoretical advance force of 754 N at 6 bar.
Q: What is the difference between ADVU-40-50 and ADN-40-25?
A: Both have a 40 mm bore and deliver 754 N at 6 bar. The ADVU has a 50 mm stroke and a 1.2 bar lower pressure limit; the ADN has a 25 mm stroke and a 0.6 bar lower pressure limit.
Q: Can the ADVU-40-50-P-A operate below 1.2 bar?
A: No. The minimum operating pressure is 1.2 bar. If the supply pressure can drop below 1.2 bar, the cylinder may not extend or retract fully — choose the ADN-40-25 for 0.6 bar capability, but the stroke is limited to 25 mm.
Q: Does the ADVU-40-50-P-A have adjustable cushioning?
A: No. It uses elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series.
Q: What is the lead time for Festo ADVU-40-50-P-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO ADVU-40-50-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.