HYRIG can supply the FESTO ADN-32-40-A-P-A compact cylinder. The FESTO ADN-32-40-A-P-A is a double-acting compact cylinder with a 32 mm piston diameter, 40 mm stroke, and elastic end-position cushioning, delivering 483 N theoretical force at 6 bar. It is the most common ADN size for clamping and compact transfer motions — the 32 mm bore provides enough force for medium fixtures, and the 40 mm stroke covers most clamp and ejector travel requirements.
| Piston diameter | 32 mm |
| Stroke | 40 mm |
| Mode of operation | Double-acting |
| Cushioning | Elastic, both ends |
| Operating pressure | 0.6 bar … 10 bar |
| Theoretical force at 6 bar | 483 N advance |
| Pneumatic connection | G 1/8 |
| Standard | ISO 21287 |
| Order code | 536274 |
| Model | Bore | Stroke | Theoretical force at 6 bar | Port | Order code |
|---|---|---|---|---|---|
| ADN-25-25-A-P-A | 25 mm | 25 mm | 295 N | M5 | 536255 |
| ADN-32-40-A-P-A | 32 mm | 40 mm | 483 N | G 1/8 | 536274 |
| ADN-40-25-A-P-A | 40 mm | 25 mm | 754 N | G 1/8 | — |
Explore the full range in the FESTO ADN compact cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Mounting standard | ISO 21287 |
| Piston diameter | 32 mm |
| Stroke | 40 mm |
| Pneumatic connection | G 1/8 |
| Cushioning | Elastic, both ends |
| Operating pressure | 0.6 bar … 10 bar |
| Ambient temperature | -20 °C … +80 °C |
The ADN-32-40-A-P-A uses the same extruded aluminium barrel with elastic end-position cushioning as the rest of the ADN series. Compressed air enters one of the two G 1/8 ports and drives the piston; the elastic cushioning at both ends absorbs the end-of-stroke impact without an adjustment screw. The 32 mm bore produces 483 N theoretical advance force at 6 bar.
Compared with the ADN-25, the 32 mm bore increases the force by approximately 64% (295 N to 483 N) while adding only a moderate increase in body size. The G 1/8 port also provides higher flow than the M5 port on the ADN-25, so the 32 mm cylinder can achieve faster cycle times on the same supply line. The 0.6 bar lower pressure limit remains the same across the ADN series.
Not sure whether 483 N at 6 bar is sufficient for your clamp or ejector load, or need the 40 mm bore for higher force? Send your load, required force, available space, supply pressure, and mounting orientation, and we will confirm the cylinder model and accessory combination.
Q: What is the operating pressure range of the Festo ADN-32-40-A-P-A?
A: 0.6 bar to 10 bar, with a theoretical advance force of 483 N at 6 bar.
Q: What is the pneumatic connection size of the ADN-32-40-A-P-A?
A: G 1/8, which provides higher flow than the M5 port on the ADN-25 series.
Q: Does the ADN-32-40-A-P-A have adjustable cushioning?
A: No. The ADN series uses elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series or an ADN variant with PPV cushioning.
Q: What is the difference between ADN-32-40-A-P-A and ADVU-32-100-P-A?
A: Both have a 32 mm bore and deliver 483 N at 6 bar. The ADN has a 40 mm stroke and a 0.6 bar lower pressure limit; the ADVU has a 100 mm stroke and a 1.2 bar lower pressure limit. The ADVU body is designed for different mounting configurations.
Q: What is the lead time for Festo ADN-32-40-A-P-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO ADN-32-40-A-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.