HYRIG can supply the FESTO ADN-40-25-A-P-A compact cylinder. The FESTO ADN-40-25-A-P-A is a double-acting compact cylinder with a 40 mm piston diameter, 25 mm stroke, and elastic end-position cushioning, delivering 754 N theoretical force at 6 bar. It combines a larger 40 mm bore with a short 25 mm stroke — used where high force is needed in a very tight space, such as press-fit stations, heavy clamps, and high-force ejectors where the travel is limited.
| Piston diameter | 40 mm |
| Stroke | 25 mm |
| Mode of operation | Double-acting |
| Cushioning | Elastic, both ends |
| Operating pressure | 0.6 bar … 10 bar |
| Theoretical force at 6 bar | 754 N advance |
| Pneumatic connection | G 1/8 |
| Standard | ISO 21287 |
| Model | Bore | Stroke | Theoretical force at 6 bar | Port |
|---|---|---|---|---|
| ADN-25-25-A-P-A | 25 mm | 25 mm | 295 N | M5 |
| ADN-32-40-A-P-A | 32 mm | 40 mm | 483 N | G 1/8 |
| ADN-40-25-A-P-A | 40 mm | 25 mm | 754 N | G 1/8 |
Explore the full range in the FESTO ADN compact cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Mounting standard | ISO 21287 |
| Piston diameter | 40 mm |
| Stroke | 25 mm |
| Pneumatic connection | G 1/8 |
| Cushioning | Elastic, both ends |
| Operating pressure | 0.6 bar … 10 bar |
| Ambient temperature | -20 °C … +80 °C |
The ADN-40-25-A-P-A uses the extruded aluminium barrel with elastic end-position cushioning, but with a 40 mm bore and a short 25 mm stroke. The 40 mm bore produces 754 N theoretical advance force at 6 bar, which is the highest force in the ADN compact cylinder range (excluding the larger bores not covered in this batch). The short 25 mm stroke keeps the overall body length compact, so the cylinder can fit into a press-fit or clamp station where the available space is limited.
The elastic cushioning at both ends absorbs the end-of-stroke impact without an adjustment screw. The G 1/8 port provides sufficient flow for the 40 mm bore, and the 0.6 bar lower pressure limit allows operation from a low-pressure supply. Compared with the ADN-32-40, the 40-25 delivers 56% more force (483 N to 754 N) but with a shorter stroke (25 mm vs 40 mm).
Not sure whether 754 N at 6 bar is sufficient for your press-fit or clamp load, or need the 40 mm stroke for longer travel? Send your load, required force, available space, supply pressure, and mounting orientation, and we will confirm the cylinder model and accessory combination.
Q: What is the operating pressure range of the Festo ADN-40-25-A-P-A?
A: 0.6 bar to 10 bar, with a theoretical advance force of 754 N at 6 bar.
Q: What is the highest force in the ADN compact cylinder range?
A: For the bore sizes covered in this batch, the ADN-40-25-A-P-A delivers 754 N at 6 bar, which is higher than the ADN-32-40 (483 N) and ADN-25-25 (295 N). Larger ADN bores are available for higher force requirements.
Q: Does the ADN-40-25-A-P-A have adjustable cushioning?
A: No. The ADN series uses elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series or an ADN variant with PPV cushioning.
Q: What is the difference between ADN-40-25 and ADVU-40-50?
A: Both have a 40 mm bore and deliver 754 N at 6 bar. The ADN has a 25 mm stroke and a 0.6 bar lower pressure limit; the ADVU has a 50 mm stroke and a 1.2 bar lower pressure limit. The ADVU body is designed for different mounting configurations.
Q: What is the lead time for Festo ADN-40-25-A-P-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO ADN-40-25-A-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.