HYRIG can supply the FESTO DSBG ISO 15552 tie-rod profile cylinder range and its variants. The DSBG series is a double-acting profile cylinder with external tie rods, bore sizes from 40 mm to 125 mm, and PPVA adjustable pneumatic cushioning. It is the tie-rod alternative to the DSBC profile barrel, used where the cylinder may need to be disassembled for service or where the existing machine frame matches the tie-rod footprint.
| Series | DSBG, tie-rod profile cylinder |
| Standard | ISO 15552 |
| Bore range | 40 mm, 63 mm, 125 mm |
| Stroke range | 175 mm, 254 mm, 400 mm |
| Operating pressure | 0.2 bar … 12 bar |
| Cushioning | PPVA adjustable pneumatic, both ends |
| Position sensing | Magnetic piston and sensor slots |
| Force at 6 bar | 754 N … 7363 N advance |
| Model | Bore | Stroke | Theoretical force at 6 bar | Port | Order code |
|---|---|---|---|---|---|
| DSBG-40-254-PPVA-N3 | 40 mm | 254 mm | 754 N | G1/4 | 1644503 |
| DSBG-63-175-PPVA-N3 | 63 mm | 175 mm | 1870 N | G3/8 | 1646739 |
| DSBG-125-400-PPVA-N3 | 125 mm | 400 mm | 7363 N | G1/2 | 2159632 |
Data source: Technical data table.
The DSBG series uses a tie-rod profile construction to ISO 15552. The tie rods run along the outside of the cylinder tube, and the end caps are secured by nuts. This allows the cylinder to be disassembled for service without replacing the whole unit. The PPVA adjustable pneumatic cushioning at both ends lets you tune the exhaust air near end position, so the load decelerates without hard impact.
The 40 mm bore produces 754 N at 6 bar; the 63 mm bore produces 1870 N; the 125 mm bore produces 7363 N. The operating pressure range varies by bore, from 0.2 bar to 12 bar. On long strokes with larger bores, rod support or an external guide is recommended if the load introduces side loads.
Not sure which DSBG bore and stroke match your existing DNC cylinder? Send the complete DNC part number, required force, stroke, side-load conditions, and mounting interface, and we will confirm the DSBG model code and cushioning variant. Explore related models: DSBG-40-254-PPVA-N3, DSBG-63-175-PPVA-N3, and DSBG-125-400-PPVA-N3.
Q: What is the difference between DSBG and DSBC?
A: DSBG is a tie-rod profile cylinder to ISO 15552; DSBC is a profile barrel cylinder to the same standard. Both deliver the same force for the same bore, but the DSBG body can be disassembled for service.
Q: What is the theoretical force of DSBG-63-175-PPVA-N3 at 6 bar?
A: 1870 N advance and 1682 N return, based on the 63 mm piston area.
Q: What is the operating pressure range of the DSBG series?
A: 0.2 bar to 12 bar, depending on the bore. The 125 mm bore is rated from 0.2 bar to 10 bar.
Q: Does the DSBG series have adjustable cushioning?
A: Yes. The PPVA suffix indicates adjustable pneumatic cushioning at both ends.
Q: What is the lead time for Festo DSBG profile cylinders?
A: Standard lead time is 2-4 weeks from order confirmation, based on the quoted supply status.
For FESTO DSBG tie-rod cylinder selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.