Festo DSBG-63-175-PPVA-N3 Cylinder | 63 mm Bore 175 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO DSBG-63-175-PPVA-N3 cylinder. The FESTO DSBG-63-175-PPVA-N3 is a double-acting ISO 15552 profile cylinder with a 63 mm piston diameter, 175 mm stroke, and PPVA adjustable pneumatic cushioning at both ends. It delivers 1870 N theoretical advance force at 6 bar and operates from 0.4 bar to 12 bar. It is used where a larger bore is needed for higher thrust in a tie-rod profile cylinder — heavy clamping, press-fit, and transfer applications.
Conatct For Details
DetailReview(0)Additional

Festo DSBG-63-175-PPVA-N3 Cylinder | 63 mm Bore 175 mm

HYRIG can supply the FESTO DSBG-63-175-PPVA-N3 cylinder. The FESTO DSBG-63-175-PPVA-N3 is a double-acting ISO 15552 profile cylinder with a 63 mm piston diameter, 175 mm stroke, and PPVA adjustable pneumatic cushioning at both ends. It delivers 1870 N theoretical advance force at 6 bar and operates from 0.4 bar to 12 bar. It is used where a larger bore is needed for higher thrust in a tie-rod profile cylinder — heavy clamping, press-fit, and transfer applications.

Key Facts



Cylinder typeProfile cylinder, DSBG series
Piston diameter63 mm
Stroke175 mm
Mode of operationDouble-acting
CushioningPPVA adjustable pneumatic, both ends
Operating pressure0.4 bar … 12 bar
Theoretical force at 6 bar1870 N advance / 1682 N return
Piston rod threadM16 × 1.5
Pneumatic connectionG3/8
StandardISO 15552
Basic weight at 0 mm stroke1740 g
Additional weight per 10 mm stroke55 g
Order code1646739

Festo DSBG-63 Model Specifications & Stroke Variants

ModelBoreStrokeForce at 6 bar advanceCushioningOrder code
DSBG-63-175-PPVA-N363 mm175 mm1870 NPPVA adjustable1646739
DSBG-63-100-PPVA-N363 mm100 mm1870 NPPVA adjustable—
DSBG-63-200-PPVA-N363 mm200 mm1870 NPPVA adjustable—

Explore the full range in the FESTO DSBG ISO 15552 cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
StandardISO 15552
Piston diameter63 mm
Stroke175 mm
Pneumatic connectionG3/8
Piston rod threadM16 × 1.5
Basic weight at 0 mm stroke1740 g
Additional weight per 10 mm stroke55 g
Calculated weight at 175 mm stroke1740 + (17.5 × 55) ≈ 2703 g
CushioningPPVA adjustable, both ends
Operating pressure0.4 bar … 12 bar
Ambient temperature-20 °C … +80 °C

Structure / Working Principle

The DSBG-63-175-PPVA-N3 uses the same tie-rod profile cylinder design to ISO 15552 as the rest of the DSBG series. The 63 mm bore produces 1870 N theoretical advance force and 1682 N return force at 6 bar. The PPVA adjustable cushioning at both ends lets you tune the exhaust air near end position, so the higher moving mass of a 63 mm cylinder decelerates without hard impact.

The basic weight is 1740 g at 0 mm stroke, and each additional 10 mm of stroke adds 55 g. At 175 mm stroke, the calculated weight is approximately 2703 g. The operating pressure range of 0.4–12 bar is slightly narrower at the low end than the 40 mm variant (0.6 bar), but still covers most workshop air systems. The M16 × 1.5 piston rod thread and G3/8 port match the standard fittings and accessories for this bore size.

Applications

  • Heavy clamping: where 1870 N at 6 bar is required to hold a large workpiece, and the 175 mm stroke covers the clamp travel.
  • Press-fit stations: where the tie-rod body can be disassembled for service, and the 63 mm bore provides the insertion force.
  • Transfer slides with medium loads: where the ISO 15552 interface is already present and the load exceeds the capacity of a 40 mm bore.
  • Replacement of DNC-63-175-PPV-A units: in existing machinery with ISO 15552 mounting and a tie-rod cylinder footprint.

Selection Support

Not sure whether 1870 N at 6 bar is sufficient for your clamp or press-fit load, or need the DSBC profile barrel variant? Send your load, required force, available space, and mounting interface, and we will confirm the cylinder model and cushioning variant.

Frequently Asked Questions

Q: What is the theoretical force of the Festo DSBG-63-175-PPVA-N3 at 6 bar?
A: 1870 N advance and 1682 N return, based on the 63 mm piston area.

Q: What is the weight at 175 mm stroke?
A: Approximately 2703 g, calculated from 1740 g basic weight plus 55 g per 10 mm stroke (17.5 × 55 g).

Q: What is the difference between DSBG-63-175 and DSBC-63-175?
A: Both deliver 1870 N at 6 bar and use the same ISO 15552 interface. DSBG is a tie-rod body that can be disassembled; DSBC is a profile barrel body. Choose DSBG when service disassembly or the tie-rod footprint matches the existing machine.

Q: Does the DSBG-63-175-PPVA-N3 have adjustable cushioning?
A: Yes. The PPVA suffix indicates adjustable pneumatic cushioning at both ends.

Q: What is the lead time for Festo DSBG-63-175-PPVA-N3?
A: Standard lead time is 3–4 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO DSBG-63-175-PPVA-N3 selection and mounting accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit