Festo DSBG-125-400-PPVA-N3 Cylinder | 125 mm Bore 400 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO DSBG-125-400-PPVA-N3 cylinder. The FESTO DSBG-125-400-PPVA-N3 is a double-acting ISO 15552 profile cylinder with a 125 mm piston diameter, 400 mm stroke, and PPVA adjustable pneumatic cushioning at both ends. It delivers 7363 N theoretical advance force at 6 bar and operates from 0.2 bar to 10 bar. It is the large-bore variant of the DSBG series, used where very high thrust is needed over a 400 mm travel — heavy press-fit, large gate actuation, and high-force transfer applications.
Conatct For Details
DetailReview(0)Additional

Festo DSBG-125-400-PPVA-N3 Cylinder | 125 mm Bore 400 mm

HYRIG can supply the FESTO DSBG-125-400-PPVA-N3 cylinder. The FESTO DSBG-125-400-PPVA-N3 is a double-acting ISO 15552 profile cylinder with a 125 mm piston diameter, 400 mm stroke, and PPVA adjustable pneumatic cushioning at both ends. It delivers 7363 N theoretical advance force at 6 bar and operates from 0.2 bar to 10 bar. It is the large-bore variant of the DSBG series, used where very high thrust is needed over a 400 mm travel — heavy press-fit, large gate actuation, and high-force transfer applications.

Key Facts



Cylinder typeProfile cylinder, DSBG series
Piston diameter125 mm
Stroke400 mm
Mode of operationDouble-acting
CushioningPPVA adjustable pneumatic, both ends
Operating pressure0.2 bar … 10 bar
Theoretical force at 6 bar7363 N advance / 6881 N return
Piston rod threadM27 × 2
Pneumatic connectionG1/2
StandardISO 15552
Basic weight at 0 mm stroke6611 g
Additional weight per 10 mm stroke143 g
Cushioning length45 mm
Impact energy in end positions2.5 J
Order code2159632

Festo DSBG-125 Model Specifications & Stroke Variants

ModelBoreStrokeForce at 6 bar advanceCushioningOrder code
DSBG-125-400-PPVA-N3125 mm400 mm7363 NPPVA adjustable2159632

Explore the full range in the FESTO DSBG ISO 15552 cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
StandardISO 15552
Piston diameter125 mm
Stroke400 mm
Pneumatic connectionG1/2
Piston rod threadM27 × 2
Basic weight at 0 mm stroke6611 g
Additional weight per 10 mm stroke143 g
Calculated weight at 400 mm stroke6611 + (40 × 143) = 12331 g
Cushioning length45 mm
Impact energy in end positions2.5 J
Operating pressure0.2 bar … 10 bar
Ambient temperature-20 °C … +80 °C

Structure / Working Principle

The DSBG-125-400-PPVA-N3 uses the tie-rod profile cylinder design to ISO 15552 with a 125 mm bore. The piston produces 7363 N theoretical advance force and 6881 N return force at 6 bar. The PPVA adjustable cushioning at both ends has a cushioning length of 45 mm and an impact energy rating of 2.5 J per end position — this is the highest impact energy in the DSBG series covered here, reflecting the larger moving mass of the 125 mm bore.

The basic weight is 6611 g at 0 mm stroke, and each additional 10 mm of stroke adds 143 g. At 400 mm stroke, the calculated weight is approximately 12331 g. The operating pressure range is 0.2–10 bar, which is wider at the low end than the smaller DSBG bores. The M27 × 2 piston rod thread and G1/2 port match the heavy-duty accessories for this bore size. On a 400 mm stroke with a 125 mm bore, rod support or an external guide is recommended if the load attachment introduces side loads.

Applications

  • Heavy press-fit: where 7363 N at 6 bar is required to press a large bearing or bushing, and the 400 mm stroke covers the insertion depth.
  • Large gate actuation: where the gate mass and travel require a 125 mm bore and the PPVA cushioning controls the end-of-stroke impact.
  • High-force transfer slides: where the load exceeds the capacity of the 63 mm bore and the ISO 15552 interface is already present.
  • Replacement of DNC-125-400-PPV-A units: in existing machinery with ISO 15552 mounting and a tie-rod cylinder footprint.

Selection Support

Not sure whether 7363 N at 6 bar is sufficient for your press-fit load, or need the DSBC profile barrel variant for a different body style? Send your load, required force, stroke, side-load conditions, and mounting interface, and we will confirm the cylinder model and rod support requirements.

Frequently Asked Questions

Q: What is the theoretical force of the Festo DSBG-125-400-PPVA-N3 at 6 bar?
A: 7363 N advance and 6881 N return, based on the 125 mm piston area.

Q: What is the weight at 400 mm stroke?
A: Approximately 12331 g, calculated from 6611 g basic weight plus 143 g per 10 mm stroke (40 × 143 g).

Q: What is the impact energy rating?
A: 2.5 J per end position, with a cushioning length of 45 mm. Confirm that the moving mass and velocity produce an impact energy within this limit.

Q: Does a 400 mm stroke with 125 mm bore need rod support?
A: It depends on the side load. For pure axial loads within the cylinder's rated buckling limit, no external support is needed. For side loads or long rod extensions, an external guide or rod support is recommended — send the load details and we will confirm.

Q: What is the lead time for Festo DSBG-125-400-PPVA-N3?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.

Contact

For FESTO DSBG-125-400-PPVA-N3 selection and rod support accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit