A gasoline pump (also called a fuel transfer pump or petrol pump) is a self‑priming rotary vane or centrifugal pump specifically designed to handle flammable liquids – petrol (gasoline), diesel, kerosene, and light fuel oils – safely and efficiently. Unlike water pumps, gasoline pumps feature explosion‑proof motors (or manual operation), static‑wire grounding, and seals compatible with hydrocarbons.
These pumps are used for:
Transferring fuel from drums, barrels, or storage tanks to vehicles, generators, or machinery
Refueling construction equipment, farm tractors, and industrial engines
Emptying fuel storage tanks during maintenance
Emergency fuel supply (e.g., flood or disaster response)
Dispensing diesel from bowsers or skid tanks
Available in three drive types: 12V DC (vehicle cigarette lighter or battery), 230V AC (single‑phase mains), manual lever (hand pump, no power required).
| Parameter | Electric 12V DC | Electric 230V AC | Manual Lever |
|---|---|---|---|
| Flow rate (max) | 20 – 60 L/min | 40 – 80 L/min | 10 – 20 L/cycle |
| Max head (pressure) | 10 – 15 m | 15 – 25 m | 5 – 8 m |
| Suction lift (dry) | 2 – 3 m | 3 – 5 m | 2 m |
| Power | 150 – 400 W | 250 – 750 W | Hand operated |
| Inlet / outlet size | 1″ – 1.5″ | 1″ – 1.5″ | 1″ |
| Duty cycle | Intermittent (30 min) | Continuous (with thermal protection) | Unlimited |
| Hose length (included) | 3 – 4 m | 3 – 6 m | 2 m (optional) |
| Voltage | 12V DC (negative ground) | 230V / 50Hz or 110V / 60Hz | N/A |
| Max fluid temperature | 40°C | 40°C | 40°C |
| Pump Type | Efficiency | Self‑Priming | Best For |
|---|---|---|---|
| Rotary vane (most common for fuel) | High | Excellent (up to 5 m lift) | Viscous fuels (diesel, kerosene), occasional dry running |
| Centrifugal | High (clean fuel) | Moderate (needs flooded suction) | High flow, clean petrol, permanent installations |
For portable fuel transfer, rotary vane pumps are preferred because they self‑prime easily, tolerate some dry running (with carbon vanes), and maintain flow even when the tank level is low.
| Component | Material | Safety Feature |
|---|---|---|
| Pump housing | Cast iron (epoxy coated) or aluminium | Spark‑resistant |
| Vanes (rotary vane type) | Carbon (graphite) or PTFE | Self‑lubricating, no metal‑to‑metal contact |
| Impeller (centrifugal) | Bronze or stainless steel | – |
| Shaft | Stainless steel | Sealed against leakage |
| Mechanical seal | Viton (FKM) or PTFE | Hydrocarbon compatible |
| Motor (electric) | Totally enclosed fan‑cooled (TEFC) or sealed | No sparking components |
| Cable / switch | Explosion‑proof (ATEX optional) | For hazardous areas |
For pumping gasoline (petrol), which has a low flash point, the motor must be sealed or explosion‑proof and the pump must be electrically grounded to prevent static discharge. Manual lever pumps are inherently safe (no electricity).
Static wire grounding – An external grounding lug and cable must be connected to a true earth (ground rod) before pumping. Static electricity generated by fuel flow can ignite vapours.
No‑spark motor – Sealed induction motor with no exposed brushes (or brushless DC motor).
Thermal overload protection – Motor shuts off if overheated (resettable).
Bypass valve – Internal relief valve prevents overpressure if discharge nozzle is closed while pump is running.
Fuel‑proof seals – Viton or PTFE; never use Buna‑N (NBR) for gasoline (swells and leaks).
Nozzle with auto‑shutoff – Optional; stops flow when tank is full.
Never use a standard water pump or non‑rated electric pump for gasoline – risk of fire or explosion.
| Application | Recommended Pump Type | Features Needed |
|---|---|---|
| Refueling vehicles / generators from drums | 12V DC rotary vane | Cigarette lighter plug, hose with nozzle, ground wire |
| Farm / agricultural refueling from IBC or tank | 230V AC centrifugal or rotary vane | High flow, thermal protection, auto‑nozzle |
| Remote site (no electricity) | Manual lever pump | Portable, no power needed, low flow |
| Diesel transfer from storage tank to bowser | 230V AC rotary vane (cast iron) | High flow, bypass valve, 4‑6 m hose |
| Emergency flood fuel pumping | 12V DC (vehicle battery) | Portable, submersible option available |
Safe for gasoline, diesel, kerosene – Explosion‑proof motor (electric) or manual operation (lever).
Self‑priming – Lifts fuel from drums and shallow tanks without manual priming.
Built‑in bypass valve – Protects pump if discharge is closed.
Thermal protection (electric models) – Prevents motor burnout.
Corrosion‑resistant materials – Viton seals, aluminium or epoxy‑coated iron.
Portable design – Carrying handle, lightweight (5‑15 kg), suction tube included for drums.
Grounding lug – For static electricity dissipation.
Easy maintenance – Replaceable carbon vanes (rotary vane type), widely available spares.
12V DC option – Direct from vehicle battery or alligator clips – ideal for field use.
Manual lever option – No power, no risk – for small transfers or hazardous zones.
Electric pump (12V or 230V):
Grounding – Connect grounding wire from pump to an earth rod (or vehicle chassis if isolated from ground) before inserting suction tube.
Suction tube – Insert into fuel drum or tank; ensure foot strainer is submerged.
Discharge hose – Attach nozzle (or plain hose) using appropriate fittings.
Electrical – For 12V DC: connect to 12V battery (positive to positive, negative to ground). For 230V AC: plug into RCD‑protected socket.
Start pump – Switch on; fuel should flow within 10‑20 seconds (priming time).
After use – Run pump for a few seconds with suction tube in air to clear remaining fuel (except for diesel – prevent air ingress into injection systems). Turn off, disconnect power, coil hoses.
Manual lever pump:
Insert suction tube, place discharge into target container.
Pump handle up and down until fuel flows.
Return handle to lowest position after use.
| Task | Frequency |
|---|---|
| Check hoses for cracks or leaks | Before each use |
| Clean strainer / filter | Monthly or when flow reduces |
| Check carbon vanes (rotary vane pumps) | 500 hours or annually |
| Replace seals | When leaks appear |
| Inspect electrical cable and plug | Every 6 months |
| Lubricate lever mechanism (manual) | Annually (light oil) |
| Problem | Likely Cause | Solution |
|---|---|---|
| Pump runs but no flow | Loss of prime, blocked strainer, worn vanes | Re‑prime; clean strainer; replace vanes |
| Low flow | Partially blocked hose, low battery voltage (12V) , air leak | Clear hose; charge battery; check suction joints |
| Motor hums but doesn't run (12V) | Low battery, poor connection, stuck vanes | Charge battery; clean terminals; tap pump body |
| Leaking at shaft seal | Viton seal worn (gasoline swells inferior seals) | Replace with genuine Viton seal |
| Overheating (electric) | Run dry, duty cycle exceeded, ambient high | Ensure prime; let cool; reduce runtime |
| Component | Recommended Quantity |
|---|---|
| Carbon vane set (rotary vane type) | 1 set |
| Mechanical seal (Viton) | 1 set |
| Strainer / filter | 1 |
| Hose with nozzle | 1 as spare |
| Grounding wire | 1 (if lost) |
Safety certified – Complies with ATEX/IECEx (optional) and local fuel transfer regulations.
Versatile power options – 12V, 230V, 110V, or manual lever.
Built for fuel – Viton seals, carbon vanes, aluminium / epoxy housing.
Portable and easy to use – Carry handle, lightweight, suction tube included.
Widely available spares – Standard vane kits and seals.
Proven in the field – Thousands of units used by farmers, contractors, emergency services, and homeowners.
For detailed selection of the correct gasoline pump – including power source (12V, 230V, manual), flow rate, suction lift, hose length, and safety requirements – please contact our engineering team.
Email: info@hyrig.com
Our engineers support fuel transfer, refuelling, and emergency pumping projects worldwide with safe, reliable gasoline pumps – built for petrol, diesel, and light oils.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.