BM1-100 Hydraulic Motor | 100 ml/r Spool Valve Motor

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BM1-100 hydraulic motor. As part of the BM1 series, it is a compact, spool valve, economical type motor designed for light to medium load applications, offering a reliable combination of efficiency and cost.
Conatct For Details
DetailReview(0)Additional

BM1-100 Hydraulic Motor | 100 ml/r Spool Valve Motor

HYRIG can supply the BM1-100 hydraulic motor. As part of the BM1 series, it is a compact, spool valve, economical type motor designed for light to medium load applications, offering a reliable combination of efficiency and cost.

The BM1-100 features a displacement of 100 ml/r. Its compact design of spool and gear set provides small volume, high power, and low weight. The credible shaft seal design can bear high pressure, allowing for use in parallel or series circuits.

Key Facts

  • Displacement: 100 ml/r
  • Max Continuous Pressure: 12.5 MPa
  • Max Continuous Torque: 161 N·m
  • Max Continuous Speed: 589 RPM
  • Flow Rate: 60 LPM
  • Design: Spool valve, economical
  • Mounting: Various flange and shaft options available

BM1-100 Specifications

Data source: Technical data table

ParameterBM1-80BM1-100BM1-125
Displacement (ml/r)80100125
Flow (LPM) - Cont.606060
Speed (RPM) - Cont.740589475
Speed (RPM) - Int.827673594
Pressure (MPa) - Cont.12.512.512.2
Pressure (MPa) - Int.16.516.516.3
Torque (N·m) - Cont.129161202
Torque (N·m) - Int.171213268

Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.

Dimensions

The BM1-100 is designed for drop-in replacement. Below are standard dimensions for the H-type (standard) configuration. Custom flanges are available.

Dimension ItemStandard Value (mm)
Mounting FlangeRhombus flange (2-Φ13.5, pilot Φ82.5)
Shaft (Cylindrical)Φ25 mm (Parallel key 8x7x32)
Oil Port ThreadG1/2 or M22x1.5
Drain PortG1/4
Weight (Approx.)6.5 kg

For more options, refer to the BM1 Series Hydraulic Motors.

Structure / Working Principle

The motor utilizes a spool valve distribution system. When hydraulic fluid enters the inlet port, it flows through the spool valve into the gear set, creating a pressure differential that drives the gears and the output shaft. The spool valve design ensures smooth directional control and simplified maintenance. The shaft seal is designed to handle back-pressure, ensuring reliable operation.

Cross-Reference & Replacement

Looking for a compatible replacement for a 100 ml/r spool valve motor? The BM1-100 is a direct alternative. Before ordering, verify:

  1. Flange Bolt Pattern: Check the 2-bolt or 4-bolt spacing.
  2. Shaft Dimension: Confirm the shaft diameter and keyway length.
  3. Port Size: Ensure the thread matches your hose fittings (G1/2 is standard).

Applications

  • Agricultural Equipment: Small augers, spreaders, and conveyor drives.
  • Construction Machinery: Mini excavators and trenchers.
  • Industrial Equipment: Mixers and rotary tables.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the 100 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.

Frequently Asked Questions

Q: What is the maximum continuous torque of the BM1-100?
The BM1-100 delivers a maximum continuous torque of 161 N·m at a continuous pressure of 12.5 MPa.

Q: Can I use this motor in a series circuit?
Yes, the BM1-100 is equipped with a high-pressure shaft seal that allows it to be used in parallel or series circuits. However, a drain line is required if back pressure exceeds 5 MPa.

Q: What is the typical lead time for a BM1-100 order?
Standard configurations usually ship within 15-20 days. For urgent downtime situations, please contact us directly to check current stock availability.

Contact

For BM1-100 hydraulic motor selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit