HYRIG can supply the BM1-200 hydraulic motor. As part of the BM1 series, it is a compact, spool valve, economical type motor designed for light to medium load applications, offering a reliable combination of efficiency and cost.
The BM1-200 features a displacement of 200 ml/r. Its compact design of spool and gear set provides small volume, high power, and low weight. The credible shaft seal design can bear high pressure, allowing for use in parallel or series circuits.
Data source: Technical data table
| Parameter | BM1-160 | BM1-200 | BM1-250 |
|---|---|---|---|
| Displacement (ml/r) | 160 | 200 | 250 |
| Flow (LPM) - Cont. | 60 | 60 | 60 |
| Speed (RPM) - Cont. | 370 | 296 | 237 |
| Speed (RPM) - Int. | 463 | 370 | 297 |
| Pressure (MPa) - Cont. | 12.5 | 11 | 11 |
| Pressure (MPa) - Int. | 16.5 | 16.5 | 16.5 |
| Torque (N·m) - Cont. | 245 | 286 | 360 |
| Torque (N·m) - Int. | 390 | 456 | 505 |
Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.
The BM1-200 is designed for drop-in replacement. Below are standard dimensions for the H-type (standard) configuration. Custom flanges are available.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | Rhombus flange (2-Φ13.5, pilot Φ82.5) |
| Shaft (Cylindrical) | Φ25 mm (Parallel key 8x7x32) |
| Oil Port Thread | G1/2 or M22x1.5 |
| Drain Port | G1/4 |
| Weight (Approx.) | 8.0 kg |
For more options, refer to the BM1 Series Hydraulic Motors.
The motor utilizes a spool valve distribution system. When hydraulic fluid enters the inlet port, it flows through the spool valve into the gear set, creating a pressure differential that drives the gears and the output shaft. The spool valve design ensures smooth directional control and simplified maintenance. The shaft seal is designed to handle back-pressure, ensuring reliable operation.
Looking for a compatible replacement for a 200 ml/r spool valve motor? The BM1-200 is a direct alternative. Before ordering, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 200 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.
Q: What is the maximum continuous torque of the BM1-200?
The BM1-200 delivers a maximum continuous torque of 286 N·m at a continuous pressure of 11 MPa.
Q: Can I use this motor in a series circuit?
Yes, the BM1-200 is equipped with a high-pressure shaft seal that allows it to be used in parallel or series circuits. However, a drain line is required if back pressure exceeds 5 MPa.
Q: What is the typical lead time for a BM1-200 order?
Standard configurations usually ship within 15-20 days. For urgent downtime situations, please contact us directly to check current stock availability.
For BM1-200 hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.