The Lean Solution Pump is an API 610 Type BB3 horizontal, axially split, multistage centrifugal pump specifically engineered for circulating lean potassium carbonate solution in hot carbonate carbon dioxide removal processes. The pump handles hot, corrosive carbonate solution at elevated temperatures (typically 110°C to 130°C) with moderate to high discharge pressures required to push lean solution into the absorber tower.
The BB3 configuration features a single casing with multiple impellers arranged in series, all contained within an axially split casing. This design provides high head generation in a compact footprint while allowing easy access to internal components for maintenance. The axially split casing (split along the horizontal centerline) allows the entire rotor assembly to be removed by lifting the top half of the casing, without disturbing piping connections — a significant advantage for high temperature, corrosive services where regular inspection may be required.
As a China BB3 pump manufacturer, we produce fully API 610 11th Edition (ISO 13709) compliant pumps for the most demanding process applications, including hot potassium carbonate service in refineries, ammonia plants, hydrogen production facilities, and natural gas processing plants.
The pump is specifically designed for handling potassium carbonate (K₂CO₃) solutions in hot carbonate CO₂ removal systems:
Medium: Aqueous potassium carbonate solution (lean solution)
Concentration: Typically 20–30% K₂CO₃ by weight
Operating Temperature: 120°C (design range typically 110°C – 130°C)
Corrosivity: Potassium carbonate solution is moderately corrosive at elevated temperatures, becoming more aggressive with increasing temperature and concentration. It requires appropriate materials (typically 316SS or duplex stainless steel) to resist general and localized corrosion.
Other characteristics: The solution may contain trace amounts of activator compounds (e.g., diethanolamine or piperazine) and may be subject to crystallization if temperature drops below certain limits.
Beyond this specific lean solution duty, the BB3 pump series is also suitable for:
Rich solution (loaded with CO₂) circulation
Amine solutions for gas sweetening
High-pressure boiler feed water
High-head refinery process streams
Condensate and high-temperature water injection
| Parameter | Value / Range |
|---|---|
| Pump Type | API 610 Type BB3 – axially split, multistage, between bearings |
| Flow Rate (Q) | 50 ~ 800 m³/h (typical lean solution range) |
| Total Head (H) | 200 ~ 2,000 m (depending on number of stages) |
| Operating Temperature | -40°C ~ +400°C (specified: 120°C) |
| Design Pressure | Up to 110 bar (11.0 MPa) standard; higher available |
| Number of Stages | 2 to 10+ (selected based on required head) |
| Speed (rated) | 1,450 / 2,950 / 3,600 rpm |
| Casing Construction | Axially split, horizontally split casing |
| Impeller Arrangement | Opposed or same direction (with balance piston/drum) |
| Flange Rating | ASME Class 300 / 600 / 900 |
| Materials (for K₂CO₃ service) | 316/316L stainless steel, duplex 2205, super duplex 2507 |
| Feature | Description |
|---|---|
| Axially Split Casing | The casing splits horizontally along the shaft centerline. The top half can be lifted to expose the entire rotor assembly (shaft, impellers, diffusers, bearings) without disconnecting suction or discharge piping. This simplifies maintenance, inspection, and re-rating. |
| Multistage Configuration | Multiple impellers mounted on a single shaft generate high pressures progressively. Each stage adds approximately 15–60 meters of head depending on impeller design and speed. For lean solution pumps, a 4-to-8 stage design is common. |
| Diffuser (Vane) Type Casing | Stationary diffusers direct flow from each impeller to the next, providing smooth hydraulics and high efficiency. Diffuser design also reduces radial loads. |
| Between-Bearings Rotor | The impeller assembly is supported by bearings at both ends (radial bearings) plus a thrust bearing (typically tilting pad or angular contact) to handle residual axial thrust from pressure imbalance. This provides exceptional shaft stiffness and stability, especially important for high-pressure multistage operation. |
| Hydraulic Axial Thrust Balancing | Internal balancing device (balance drum or balance piston + balance line) equalizes pressure on the two sides of the rotor, minimizing thrust bearing load. For lean solution pumps, a balance drum is typical. |
| Opposed Impeller Arrangement (Optional) | Impellers can be arranged back-to-back (opposed) to hydraulically balance axial thrust internally, reducing load on thrust bearings. This is preferred for very high head applications. |
| Centerline Support | The casing is supported at the horizontal centerline, allowing symmetrical thermal expansion. For 120°C potassium carbonate service, this ensures alignment is maintained and prevents distortion that could cause seal or bearing failures. |
| Rigid Heavy Duty Shaft | Large diameter shaft minimizes deflection and provides stable operation even at high rotational speeds and pressures. Shaft deflection meets or exceeds API 610 requirements. |
| Renewable Wear Parts | Impeller rings, casing rings, interstage bushings, and balance drum sleeves are all replaceable, restoring pump efficiency without replacing major castings. |
| Mechanical Seals (API 682) | Seal chamber sized for API 682 cartridge mechanical seals. For hot potassium carbonate at 120°C and elevated pressure, a tandem seal (Plan 52 or Plan 53B) or double seal (Plan 54) with compatible barrier fluid is typically specified to prevent leakage of hot, corrosive carbonate solution to atmosphere. |
| Bearing & Lubrication | Heavy duty anti-friction bearings (angular contact for thrust, cylindrical roller for radial). Bearing housing with forced oil lubrication (standard for most BB3 sizes) ensures reliable cooling and lubrication at high speeds and loads. Optional oil mist lubrication available. |
| Cooling System | Water-cooled bearing housings are standard for high temperature applications (120°C process temperature). For lean solution service, finned housings alone are usually insufficient; cooling water circulation is required. |
| Materials Selection | For potassium carbonate solution at 120°C, 316/316L stainless steel is the minimum acceptable material. Duplex stainless steel (2205) offers superior resistance to chloride stress corrosion cracking and pitting, making it preferred for services with potential impurities or higher temperatures. Components such as wear rings and bushings are hard-faced (e.g., Stellite) to resist erosion from traces of solids. |
| Component | Standard Material (K₂CO₃ service) | Upgrade Option |
|---|---|---|
| Casing | 316 Stainless Steel | Duplex 2205 / Super Duplex 2507 |
| Impellers | 316 Stainless Steel | Duplex 2205 |
| Shaft | 17-4PH Stainless Steel or Duplex | Super Duplex / Inconel 718 |
| Wear Rings (Casing/Impeller) | 316SS with hard facing (Stellite) | Duplex with Stellite |
| Balance Drum / Sleeve | 316SS with Stellite coating | Duplex with Stellite |
| Bushings (Interstage) | Carbon / PTFE composite or bronze | Silicon carbide |
| Fasteners | A193 B8M (316 SS) | Duplex / Monel |
| Mechanical Seal Faces | Silicon carbide vs. carbon (for clean carbonate) | Tungsten carbide / Silicon carbide – for potential abrasives |
Note: Carbon steel is NOT acceptable for hot potassium carbonate service above 80°C due to accelerated corrosion. 316L SS is common; duplex provides higher strength and better corrosion resistance.
| System | Description |
|---|---|
| Seal Flush Plan | Plan 53B (pressurized barrier fluid reservoir with bladder accumulator) recommended for tandem seals; Plan 54 (external barrier fluid system) recommended for double seals. Plan 21 or 23 (cooled recirculation) may be used for single seals in clean carbonate service. |
| Lubrication | Forced oil lubrication system (lube oil console with pumps, filter, cooler, temperature/pressure controls) is standard for most BB3 pumps. Provides continuous oil circulation to both radial and thrust bearings. |
| Bearing Temperature Monitoring | RTD probes installed in both drive-end and non-drive-end bearing housings, with local indication and remote signal for alarm/trip. |
| Vibration Monitoring | Proximity probes (eddy current) for shaft vibration measurement (displacement) per API 670; optional accelerometers for bearing housing vibration. |
| Pressure & Temperature Sensors | Suction and discharge pressure gauges with isolation valves; temperature transmitters on process fluid near the casing (for high temperature monitoring). |
| Balance Line | Piping connecting the balance drum chamber back to the pump suction lowers pressure on the back side of the rotor, reducing axial thrust. |
| Minimum Flow Protection | Automatic recirculation valve (ARC valve) or control valve plus orifice to ensure minimum flow through the pump during low system demand, preventing overheating. |
| Baseplate | Heavy duty fabricated steel baseplate, epoxy grouted. Designed to 2x API 610 nozzle loads to maintain alignment under piping strain. |
| Coupling | Flexible spacer coupling between pump and driver (typically electric motor or steam turbine). Spacer length allows removal of pump rotating assembly without moving driver, utilizing the axially split casing’s top-half removal feature. |
The hot carbonate process for CO₂ removal typically operates at pressures from 2 to 7 MPa (discharge) and temperatures around 110–130°C. The lean solution pump is the heart of this circulation loop, requiring:
High head – to overcome absorber tower pressure plus line losses; often 800–1500 meters total head
High temperature reliability – materials and clearances must accommodate thermal growth
Corrosion resistance – potassium carbonate is corrosive, especially at these temperatures
Ease of maintenance – axially split casing allows access to all internal components in situ
The BB3 configuration directly addresses these needs:
Multistage design achieves high head without excessive tip speeds or large diameter impellers
Axially split casing allows complete inspection and overhaul without pulling the pump from the baseplate or disconnecting piping
Centerline mounting ensures thermal expansion does not cause misalignment
Full API 610 compliance guarantees heavy duty construction for continuous, high temperature, high pressure service
Broad material selection (316SS, duplex, super duplex) provides long service life in carbonate solutions
Beyond lean solution circulation in the hot carbonate process, the BB3 pump finds application in:
Refining & Petrochemical:
Lean amine pumps for gas sweetening (MDEA, DIPA, MEA services)
Rich amine circulation pumps
High-pressure reflux pumps in fractionators
Crude oil pipeline booster pumps (multistage)
Fertilizer / Ammonia Plants:
Lean and rich solution pumps in Benfield or Vetrocoke CO₂ removal units
Ammonia synthesis loop feed pumps (with appropriate materials)
Hydrogen Production:
CO₂ removal unit circulation pumps in SMR-based hydrogen plants
Carbonate solution circulation
General Process Industry:
High-pressure boiler feed pumps (power generation)
Condensate extraction pumps for high pressure systems
Produced water injection pumps (oil & gas)
Desalination high-pressure pumps (reverse osmosis feed)
As a specialized China BB3 pump manufacturer, we deliver:
Full compliance with API 610 11th Edition (ISO 13709)
Robust, heavy duty construction suitable for 24/7 continuous operation in corrosive, high temperature services
Competitive capital cost – typically 30–40% lower than major western brands for comparable designs
Shorter lead times – 20–26 weeks for standard materials, longer only for exotic alloys
Complete engineering documentation including hydraulic performance curves, NPSH curves, rotor dynamics analysis, and API data sheets
Factory performance testing with witness options (including full speed full flow testing)
Global shipping and export packaging to international standards
Spare parts availability from strategic warehouse locations
Technical support for installation, commissioning, and after-sales service
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB3 – Axially split, multistage, between bearings |
| Medium | Potassium carbonate solution (lean) |
| Operating Temperature | 120°C |
| Design Pressure | Up to 110 bar (higher available) |
| Typical Flow | 50 – 800 m³/h |
| Typical Head | Up to 1800 m (depending on stages) |
| Construction | Axially split casing, centerline mounted |
| Materials | 316L SS or Duplex 2205 (corrosion resistant) |
| Seals | API 682 compliant (tandem/double seals recommended) |
| Lubrication | Forced oil lube system |
| Certification | API 610 11th Edition / ISO 13709 |
For more information or a custom engineering proposal for your lean solution (potassium carbonate, 120°C) pump application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.