The Rich Solution Pump is an API 610 Type BB3 horizontal, axially split, between-bearings, multistage centrifugal pump, specifically engineered for handling CO₂-rich potassium carbonate solution in Benfield or other hot carbonate CO₂ absorption processes. In modern Green Ammonia plants — where hydrogen is produced from renewable-powered electrolysis and CO₂-free synthesis loops — the hot carbonate unit remains critical for managing process carbon dioxide or for post-combustion carbon capture. The rich solution pump circulates the carbonate solution that has absorbed CO₂ from the regenerator/stripper back to the absorber, forming the closed-loop circulation.
The BB3 configuration features a single axially split casing with multiple impellers arranged in series, providing high head generation in a compact footprint. The axially split casing (split along the horizontal centerline) allows the entire rotor assembly — shaft, impellers, diffusers, bearings — to be removed by lifting only the top half of the casing, without disturbing suction or discharge piping. This is a significant advantage for high-temperature, corrosive services where regular inspection may be required.
As a specialized China BB3 pump manufacturer, we produce fully API 610 11th Edition (ISO 13709) compliant pumps for the most demanding process applications, including hot carbonate circulation in green ammonia facilities, fertilizer plants, refineries, hydrogen production units, and natural gas processing plants.
This pump series is specifically engineered for handling CO₂-loaded (rich) carbonate solution and other related chemical services:
Primary Media:
Rich potassium carbonate solution (K₂CO₃ + KHCO₃) — solution that has absorbed CO₂ in the absorber tower; typically containing potassium bicarbonate as the CO₂‑loaded species
Rich amine solution — MEA, DEA, MDEA after CO₂ absorption in amine scrubbing units
Benfield solution — the proprietary hot carbonate solvent used in the Benfield process for hydrogen and synthesis gas purification
Semi-lean solution — partially regenerated carbonate solution at intermediate loading levels
Typical Fluid Properties & Challenges:
CO₂ loading — elevated levels of bicarbonate (HCO₃⁻) content in the rich solution
Temperature range — typically 70°C to 130°C, with peaks up to 200°C
Corrosive nature — potassium carbonate solution is corrosive at elevated temperatures, requiring 316/316L stainless steel or duplex materials
Particle tolerance — may contain trace solids from degradation products or corrosion debris; BB3 pump design with diffuser passages can accommodate slight particulate content
Crystallization risk — temperature drops below certain thresholds can cause potassium bicarbonate crystal formation; proper heat tracing and seal quench systems are required
Green Ammonia Context: In green ammonia production, hydrogen is generated via water electrolysis powered by renewable energy. The resulting hydrogen stream — essentially CO‑free — does not require conventional syngas purification. However, the hot carbonate system may still be present for:
CO₂ removal from any auxiliary fuel gas or process off‑gases
Post‑combustion carbon capture from any fired heaters or reformers in the plant boundary
Managing purge gas CO₂ before recycle
Extended Applications (Same Pump Platform):
Fertilizer and ammonia plants (traditional): Lean solution pump, rich solution pump, carbamate feed pump, methyl ammonia pump
Coal chemical industry: Lean/rich methanol pumps, high‑pressure ash water pumps
Gas processing: Lean amine pumps, rich amine pumps for natural gas sweetening
Carbon capture & storage (CCS): Rich amine and rich carbonate pumps for post‑combustion CO₂ capture from power plants and industrial sources
General refining and petrochemical: High‑pressure reflux pumps, crude oil transfer, produced water injection
Power generation: Boiler feed water pumps (high pressure steam systems)
Desalination: High‑pressure reverse osmosis feed pumps
The API 610 BB3 rich solution pump covers a broad operating envelope:
| Parameter | Value / Range |
|---|---|
| Pump Type | API 610 Type BB3 – axially split, between bearings, multistage |
| Flow Rate (Q) | 10 ~ 3,000 m³/h (selectable based on absorber circulation rate) |
| Total Head (H) | Up to 1,600 m (staged to meet required absorber tower pressure) |
| Operating Temperature | -60°C ~ +200°C (typical rich solution: 70–130°C) |
| Design Pressure | Up to 300 bar (30 MPa) depending on services and flange rating |
| Speed (rated) | 1,450 / 2,980 / 3,600 rpm |
| Casing Construction | Axially split, single casing, upper/lower symmetrical volute |
| Impeller Arrangement | Opposed (back‑to‑back) configuration for axial thrust self‑balancing |
| Nozzle Orientation | Side‑Side (standard); vertical or other orientations optional |
| Flange Rating | ASME Class 300 / 600 / 900 / 1500+ |
| Materials (for K₂CO₃/amine service) | 316/316L stainless steel, duplex 2205, super duplex 2507, Alloy 20, Hastelloy |
| Drive Power | Up to 5,000+ kW for large fertilizer and green ammonia installations |
Parameter Sources: These ranges are compiled from multiple API 610 BB3 compliant Chinese and international manufacturers. Specific values may vary by manufacturer — contact us for detailed performance curves matched to your process.
| Manufacturer / Model | Q (m³/h) | H (m) | P (MPa) | T (°C) | References |
|---|---|---|---|---|---|
| Yantai Longgang LCD | 10–1,500 | ≤1,600 | 25 MPa | -60–+200 | API 610 BB3, axially split |
| Harbin Blossom LCD | 10–1,500 | ≤1,600 | 25 MPa | -60–+200 | API 610 BB3, axially split |
| Sichuan Zigong HZCN | 10–3,000 | ≤1,500 | 25 MPa | -60–+200 | Volute type, symmetric impellers |
| CORE HPRT CAM/RAM | 10–3,000 | ≤1,500 | 25 MPa | -60–+200 | Axially split, opposite impeller |
| Huasheng BB3 | ≤600 | ≤1,500 | 250 bar | -20–+300 | Radially split, single casing |
| Apollo AMG | ≤3,200 | ≤2,200 | 265 bar | ≤+200 | Axially split, centre support |
| Suhua TSMP | 22–680 | — | 250 bar | — | Axially split BB3 |
Note: These are general ranges for API 610 BB3 pumps; exact selection depends on your green ammonia rich solution duty.
The API 610 BB3 rich solution pump incorporates a comprehensive suite of heavy-duty design features specifically optimized for high‑temperature, corrosive, and high‑pressure continuous chemical service:
| Feature | Description |
|---|---|
| Axially Split Casing | The casing splits horizontally along the shaft centerline into upper and lower halves. The top half can be lifted to expose the entire rotor assembly (shaft, impellers, diffusers, bearings) without disconnecting suction or discharge piping. This design allows quick inspection, re‑rating, and overhaul — a critical advantage for green ammonia and carbon capture plants where maintenance windows are limited. |
| Between‑Bearings Construction | The multistage rotor is supported by bearings at both ends, providing exceptional shaft rigidity and resistance to deflection under high hydraulic loads. This ensures stable, vibration‑free operation across the full flow range, and extends mechanical seal and bearing life — essential for 24/7/365 circulation service. |
| Opposed Impeller Arrangement (Back‑to‑Back) | Impellers are arranged in opposed groups, with stages split into two sets facing opposite directions. This configuration achieves complete axial thrust self‑balancing without the need for complex balance drums or balance disks, eliminating a major failure point. For rich solution pumps, this significantly reduces thrust bearing loads and extends reliability in continuous circulation service. |
| Double Volute Casing (Upper/Lower Symmetrical) | The volute body is arranged symmetrically (upper and lower halves), automatically balancing radial hydraulic forces. This produces minimal radial loads, reducing shaft deformation, decreasing bearing loads, and ensuring smooth operation across variable flow conditions — essential for rich solution pumps that may see widely varying circulation rates. |
| Self‑Balancing Hydraulic System | Both axial forces (by opposed impeller groups) and radial forces (by symmetrical volute) are fully self‑balanced internally. No complex balance mechanisms, thrust bearing loads, or radial force compensators are required, reducing maintenance costs and improving overall reliability. The residual axial force is balanced through throttle bushings and intermediate bushings, leaving thrust bearings to handle only minor net loads. |
| Double Suction First Stage (Optional) | When Net Positive Suction Head available (NPSHa) is limited, the first‑stage impeller can be supplied as a double‑suction (dual‑entry) design. This significantly improves NPSH characteristics and reduces the risk of cavitation — beneficial when drawing rich solution from an absorber bottom at low submergence. Many Chinese manufacturers offer this as a standard option for DN80 (3") and larger discharge pumps. |
| Near‑Centerline / Centerline Support | The casing is supported at or very close to the pump centerline, allowing uniform thermal expansion without shaft misalignment or distortion. For carbonate and amine services operating at 70–130°C, this feature ensures the pump remains perfectly aligned throughout the full temperature cycle — essential for seal and bearing reliability. |
| Renewable Wear Parts | Casing rings, impeller rings, interstage bushings, throttle bushings, and throat bushings are fully renewable and replaceable without replacing major castings. Hardened, non‑galling material combinations resist galling when handling solutions with trace solids or corrosion products. The ability to replace only wear parts restores pump efficiency at a fraction of replacement cost. |
| API 682 Seal Chamber | Seal chamber dimensions fully conform to API 682 4th Edition (3rd Edition also supported). Accommodates single, tandem, and double cartridge mechanical seals, with a full array of auxiliary seal flush plans tailored to rich solution service. For CO₂‑loaded solutions, Plan 53B (pressurized barrier fluid reservoir with bladder accumulator) or Plan 54 (external barrier fluid system) is recommended for tandem/double seal arrangements. Plan 21 or Plan 23 (cooled recirculation) may be used for single seals in clean, non‑crystallizing services. |
| Flexible Lubrication Options | Available bearing configurations include: • Oil ring self‑lubricating — standard for most chemical plant applications, with constant level oiler and bearing isolator seals • Forced oil lubrication — for high‑speed, high‑power, or high‑temperature installations • Cooling options — fan‑cooled, finned housings, or water‑cooled jackets based on operating temperature (water cooling recommended for carbonate/amine services above 100°C) • Bearing types: Angular contact ball bearings, cylindrical roller bearings, sleeve bearings, or tilt‑pad bearings depending on service conditions |
| Maintenance‑Friendly Design | Within an axially split BB3 pump: • Upper casing half lifts off for full rotor access without removing the lower half • Bearings and mechanical seals accessible without dismantling the upper casing • Inspection / overhaul typically completed in a single shift • API 682 seal changes without disconnecting pipework • Full rotor balancing can be verified in situ |
Selecting the correct materials for hot carbonate and amine services is critical for long‑term reliability. Rich solutions present additional challenges due to higher CO₂ content, which can increase corrosivity compared to lean solutions:
Material Suitability for Rich Solution Service:
| Material | Suitability for Hot K₂CO₃ (Rich) | Suitability for Amine (Rich) | Corrosion Resistance | Cost | Recommended Use |
|---|---|---|---|---|---|
| Carbon Steel (WCB/A216) | Not recommended (severe corrosion above 80°C) | Limited (subject to amine corrosion cracking) | Poor | Low | Not suitable |
| 304 SS | Limited (sensitive to chloride sour conditions) | Moderate (general service) | Low‑Moderate | Low‑Moderate | Low temperature or low concentration rich solutions |
| 316 / 316L SS | Good – widely used for standard hot carbonate service | Good – standard for most MEA/DEA/MDEA pumps | Moderate‑Good | Moderate | Standard choice for rich solution in green ammonia |
| Duplex 2205 | Excellent – superior pitting and stress corrosion resistance | Excellent – resists amine‑induced cracking | Very Good | High | Best value for aggressive conditions, high reliability requirement |
| Super Duplex 2507 | Excellent – maximum corrosion resistance and strength | Excellent – handle any amine service | Excellent | Very High | Harsh service, high temperature, heavy corrosion |
| Alloy 20 (CN7M) | Good | Excellent for amine cracking resistance | Very Good | Very High | Severe amine service, H₂S‑rich environments |
| Hastelloy C‑276 | Excellent (maximum corrosion resistance) | Excellent | Excellent | Highest | Extreme corrosive conditions |
API 610 Material Classes Available:
All API 610 Table H‑1 material classes (S‑4 through D‑2)
Class S‑1, S‑6, S‑8, A‑8 and others
NORSOK approved materials on request
NACE MR0103 / MR0175 compliance for sour service (when H₂S is present)
Recommended Configuration for Green Ammonia Rich Solution Service (K₂CO₃ at ~120°C):
| Component | Standard Choice | Upgrade Option |
|---|---|---|
| Casing | 316L Stainless Steel (SS) | Duplex 2205 SS |
| Impellers | 316L Stainless Steel | Duplex 2205 SS |
| Shaft | 17‑4PH Stainless Steel or Duplex 2205 | Super Duplex 2507 / Inconel 718 |
| Wear Rings (Casing / Impeller) | 316L SS with hard facing (Stellite®) | Duplex with Stellite coating |
| Interstage / Throttle Bushings | 316L SS with Stellite coating | Duplex with Stellite coating |
| Shaft Sleeves | 316L SS with spiral grooves | Duplex 2205 SS |
| Fasteners (Casing / Cover) | A194 B8M / A193 B8M (316 SS) | Duplex / Monel |
| Mechanical Seal Faces | Silicon carbide vs. carbon (clean service) | Tungsten carbide / Silicon carbide (abrasive service) |
Recommendation for rich potassium carbonate at 70–130°C: 316/316L stainless steel is the minimum acceptable material. Duplex 2205 stainless steel offers significantly better resistance to chloride stress corrosion cracking (CSCC) and pitting, with higher mechanical strength — making it the preferred choice for aggressive hot carbonate rich solution service when total cost of ownership is considered.
Note for Green Ammonia: In green hydrogen‑based ammonia plants, the carbonate system may have lower impurities than traditional plants (due to clean electrolytic hydrogen feed). However, the potential for ingress of trace air (oxygen) into the carbonate loop can actually increase corrosion rates; duplex materials provide an additional safety margin. Always confirm material compatibility with your process licensor.
| System | Description and Application to Rich Solution Service |
|---|---|
| Seal Flush Plans | For CO₂‑loaded carbonate rich solution: • Tandem seal with Plan 52 (buffer fluid reservoir) — recommended for non‑toxic leakage containment • Double seal with Plan 53B (pressurized barrier fluid reservoir with bladder accumulator) — preferred for hazardous service • Double seal with Plan 54 (external barrier fluid system) — for large installations requiring full barrier fluid circulation and cooling • Plan 11 (internal recirculation) + orifice — possible for clean single seals in low‑risk applications, but not recommended for rich amine or rich carbonate due to sealing reliability concerns |
| Lubrication | • Oil ring lubrication with constant level oiler — standard for moderate power and speed; bearing isolator seals prevent oil mist escape • Forced oil lubrication (lube oil console with pumps, filters, coolers, and controls) — required for high power and high speed applications; provides continuous oil circulation to bearings • Oil mist lubrication — optional for large pump sets or environmentally sealed installations • Bearing housing with water cooling (standard for rich solution service due to 70–130°C fluid temperature) |
| Bearing Temperature Monitoring | RTD probes (PT100) installed in both drive‑end and non‑drive‑end bearing housings, with local indication and 4‑20 mA signal to plant DCS for high temperature alarm and trip. |
| Vibration Monitoring | • Proximity probes (eddy current) for shaft vibration measurement (displacement) per API 670 — provides early warning of rotor dynamic issues • Accelerometers for bearing housing vibration (velocity) — standard for most API 610 BB3 pumps • Both signals integrated into the plant monitoring system |
| Pressure & Temperature Sensors | • Suction and discharge pressure gauges (with isolation valves and snubbers) • Temperature transmitters on process fluid near suction and discharge nozzles • Differential pressure measurement across stages (optional) |
| Balance Line | Piping connecting the balance drum chamber (or last stage back side) back to pump suction. Lowers pressure behind the final stage, reducing residual axial thrust. For opposed impeller BB3 pumps, this line is simple and low flow. |
| Minimum Flow Protection | • Automatic recirculation valve (ARC valve) — self‑contained recirculation ensures pump never operates below minimum continuous stable flow, preventing overheating and cavitation • Control valve + orifice plate — more precise but requires external control; suitable for DCS‑controlled recirculation loops |
| Baseplate | Heavy duty fabricated steel baseplate (epoxy grouted recommended). Designed to 2× API 610 nozzle loads to maintain alignment under piping strain and thermal expansion. Includes drip rim, oil collection sump, and leveling screws. |
| Coupling | Flexible spacer coupling (spacer length sized specifically to allow removal of pump rotating assembly without moving driver — made possible by the axially split casing’s top‑half removal feature). Standard coupling guard with zero‑speed interlock provision. |
The hot carbonate process for CO₂ capture (Benfield, Vetrocoke, or other activated carbonate systems) operates at pressures from 2 to 7 MPa (20–70 bar) and temperatures typically between 70°C and 130°C. The rich solution pump is the circulation workhorse of this closed loop, and the BB3 configuration directly addresses its most critical requirements:
High Differential Head: Liquid must be lifted from the relatively low pressure absorber bottom to the higher pressure regenerator (or vice versa) with enough pressure to overcome tower packing friction and line losses. Multistage BB3 design achieves required head without an excessively large casing diameter or high tip speeds — improving efficiency and reducing vibration.
Thermal & Corrosion Resistance: Full stainless steel or duplex construction (316L minimum) withstands hot carbonate corrosion. Centerline mounting accommodates thermal expansion without misalignment. Water‑cooled bearing housings keep bearings within safe operating range despite 120°C fluid.
Ease of Maintenance: Axially split casing allows complete internal inspection and part replacement (impellers, diffusers, bushings, wear rings) without disconnecting piping. When planned outages occur (every 2‑4 years), maintenance can be completed in‑place without pulling the pump from the baseplate — a major advantage in continuous green ammonia and carbon capture operations where downtime costs are high.
Reliability: Between‑bearings construction with opposed impeller thrust balancing eliminates the need for balance drums or disks (common failure points on other BB3 designs). Heavy‑duty shaft and double volute casing minimize radial deflection, extending mechanical seal and bearing life.
Green Technology Alignment: The BB3 pump design aligns with the requirements of sustainable green ammonia production: high energy efficiency, low emissions (API 682 seals with barrier fluid systems contain all process fluid), long maintenance intervals (reducing waste and downtime), and compatibility with carbon capture streams for climate‑positive operation.
Beyond rich solution circulation in green ammonia and traditional fertilizer plants, the BB3 pump platform serves a wide range of heavy process industries:
Green Ammonia & Fertilizer:
Rich solution circulation in Benfield / hot carbonate CO₂ removal units
Lean solution pumps for regenerated carbonate return
Ammonia synthesis loop feed booster pumps
Carbamate solution pumps for urea production downstream
Carbon Capture & Storage (CCS):
Rich amine pumps in post‑combustion capture from power plants, cement kilns, steel plants
Rich carbonate pumps in capture from hydrogen SMR units, refineries
CO₂ injection pumps for enhanced oil recovery (EOR) or geological storage
Refining & Petrochemical:
Lean and rich amine pumps for gas sweetening of natural gas, refinery off‑gases (MEA, DEA, MDEA, DIPA)
High‑pressure reflux pumps in fractionators
Crude oil pipeline booster pumps (multistage)
Produced water injection pumps for oil fields
Hydrogen Production (Steam Methane Reforming):
Rich carbonate pumps in SMR‑based hydrogen plants with CO₂ capture
Lean solution circulation for pre‑combustion capture before ammonia synthesis
Power Generation:
High‑pressure boiler feed pumps (up to supercritical steam conditions)
Condensate extraction pumps for high pressure systems with CO₂ capture
General Process Industry:
Desalination high‑pressure pumps (reverse osmosis feed)
High pressure water injection for chemical processes
Refinery pipeline transfer pumps for crude and products
As a specialized China BB3 pump manufacturer, we deliver:
Full Compliance: Complete adherence to API 610 11th Edition and ISO 13709 standards — same as major Western brands. Pumps undergo hydraulic performance testing, NPSH testing, and mechanical run testing per API 610 requirements. Third‑party witness and certification available.
Heavy Duty Construction: Designed for 24/7/365 continuous operation in corrosive, high‑temperature services — with 3‑year (or longer) mean time between planned overhauls when operated within recommended conditions.
Competitive Capital Cost: Typically 30‑40% lower capital cost compared to major Western brands for equivalent API 610 BB3 designs — achieved through efficient manufacturing and lower labor rates without compromising materials or construction. This allows more budget allocation to spare parts, auxiliary systems, and installation.
Shorter Lead Times: Standard material configurations (316L SS) — 20‑26 weeks ARO (after receipt of order). Duplex or exotic alloys — 26‑32 weeks depending on material availability. Expedited delivery options are available on request for emergency replacements.
Complete Documentation:
Hydraulic performance curves (Q‑H, efficiency, NPSH3r)
Sectional drawings, general arrangement drawings
API 610 data sheets and material certifications
Rotor dynamics analysis (report)
Noise level predictions per API 610
Factory Performance Testing: Witnessed and non‑witnessed test options; full‑speed, full‑flow testing on a certified test loop using water (correlated to process fluid). Test reports and certificates provided.
Global Shipping: Export‑capable packaging (wooden crates, desiccant, vapor barrier). Delivery to international ports/trade zones. Shipping documentation including commercial invoice, packing list, bill of lading, and country‑specific certificates as required.
Spare Parts Availability: Critical spare parts (wear rings, bushings, seals, bearings, gaskets, shaft sleeves) stocked at regional warehouses for quick replenishment. Parts kits available for planned overhauls.
Technical Support: Pre‑sale application engineering (selection and sizing), installation supervision, commissioning assistance, and after‑sales service (warranty support, troubleshooting, training).
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB3 – Axially split, multistage, between bearings |
| Medium | Rich potassium carbonate solution (CO₂‑loaded) or rich amine |
| Operating Temperature | 70–130°C (design range -60 to +200°C) |
| Design Pressure | Up to 110 bar (Class 600) with higher available |
| Typical Flow Rates | 10–3,000 m³/h (selectable to process requirements) |
| Typical Head | Up to 1,600 m (staged to process requirement) |
| Casing Construction | Axially split (horizontal), single casing, centre‑line/near‑centre‑line support |
| Impeller Arrangement | Opposed (back‑to‑back) – axial thrust self‑balancing |
| Materials | 316L SS or Duplex 2205 (minimum) for hot carbonate; options for higher alloys |
| Seals | API 682 (4th edition), accommodate Plan 52, 53B, 54 with cartridge seals |
| Lubrication | Oil ring (standard) / forced oil (high power) / water cooling (standard for service) |
| Certification | API 610 11th Edition / ISO 13709 |
For more information or a custom engineering proposal for your green ammonia rich solution pump application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.