The Ammonia Synthesis Feed Pump is a purpose-engineered API 610 Type OH2 horizontal single-stage overhung centrifugal pump, designed to deliver liquid ammonia from ammonia storage or synthesis loop to the high-pressure ammonia synthesis reactor or urea synthesis unit.
The pump is manufactured in full compliance with API 610 11th Edition (ISO 13709) standards, featuring a radially split casing, back pull-out design, and centerline mounting for high-temperature stability. Chinese OH2 manufacturers have developed this pump specifically for the fertilizer and petrochemical industry, providing a cost-effective alternative to imported pumps while maintaining full API compliance.
For critical applications requiring larger flow rates and higher pressure, manufacturers also offer multistage configurations such as BB2, BB3, or BB5 process pumps. However, the OH2 configuration is widely adopted for standard ammonia feed duties due to its robust design, ease of maintenance, and reliable performance.
The pump is specifically designed for handling liquid ammonia (anhydrous ammonia, NH₃) in various operating conditions. The media characteristics include:
Medium: Anhydrous liquid ammonia / Liquefied ammonia
Purity: Typically ≥99.5% NH₃ content
Toxicity & Corrosivity: Ammonia is toxic, corrosive in presence of moisture, and requires leak-tight sealing to prevent emissions
Beyond liquid ammonia service, this pump series is also suitable for a wide range of challenging industrial fluids:
Fertilizer plant applications: Lean solution pump, rich solution pump, carbamate feed, methyl ammonia pump, urea synthesis liquors
Hydrocarbon processing: Liquefied hydrocarbon gases, gas condensate, crude oil, petroleum products
Chemical industry services: Various acids, alkalis, chemical raw materials
Power generation & environmental: Boiler feed water, desulfurization liquids, seawater desalination
Other media: Clean, neutral, or corrosive liquids; clean liquids or those containing trace solid particles; low-temperature or high-temperature fluids
Pumping ammonia presents specific engineering challenges. Ammonia is non-lubricating and has a low viscosity, requiring careful design of bearings and seal systems. The high vapor pressure of liquid ammonia also demands adequate net positive suction head available to prevent cavitation. Our OH2 design addresses these challenges with rigid shaft construction, optionally screw-type inducers for low NPSH applications, and API 682-compliant seal chambers that accommodate tandem or double mechanical seal arrangements with appropriate barrier fluid systems.
| Parameter | Range |
|---|---|
| Flow Rate (Q) | 3 ~ 2,600 m³/h |
| Total Head (H) | 4 ~ 400 m |
| Operating Temperature | -80°C ~ +450°C |
| Design Pressure | Up to 110 bar (standard); 2.5 MPa inlet typical |
| Rated Speed | 1450 / 2950 / 3600 rpm |
| Casing Materials | Carbon steel (WCB), 304 SS, 316 SS, 316L, duplex SS, super duplex SS, Hastelloy, Monel, titanium (TA2), Alloy 20 |
| Flange Rating | ASME Class 150 / 300 / 600 |
| Drive Power | 2.2 kW ~ 560 kW (and above) |
Source references: OH2 parameter ranges from API 610 compliant manufacturers.
Note: The specific duty parameters (25°C / 2.5MPa inlet) fall comfortably within the operating envelope of standard OH2 pumps. For higher pressure requirements (e.g., discharge up to 20 MPa or more), a BB3 horizontal split multistage pump or BB5 barrel pump is typically recommended, as used in large-scale ammonia synthesis loops. Custom engineering solutions are available based on your specific flow, head, and pressure requirements.
The ammonia synthesis feed pump incorporates a comprehensive set of design features to ensure reliable, safe, and efficient operation:
| Feature | Description |
|---|---|
| Back Pull-Out Design | The rotating assembly can be removed without disturbing the pump casing or piping connections, significantly reducing maintenance downtime. |
| Centerline Mounting | Feet are located at the casing centerline, allowing thermal expansion to occur without misalignment. Essential for high-temperature services and prolonged seal life. |
| Radially Split Casing | Robust casing design suitable for high-pressure applications, with volute or diffuser configurations available. |
| Rigid Shaft Design | Large-diameter shaft minimizes deflection and runout, meeting or exceeding API 610 Annex K requirements. Extended bearing and mechanical seal life. |
| API 682 Seal Chamber | The seal chamber fully complies with API 610 requirements and accommodates all API 682 cartridge-type mechanical seals (single, tandem, double). Multiple seal flush plans (Plan 11, 52, 53A, 54, etc.) are available. |
| Closed Impeller | Dynamically balanced to ISO 1940 Grade G2.5 or higher. Renewable wear rings on both sides maintain efficiency throughout operational life. Semi-open impeller options available for service where clogging is a concern. |
| Double Volute Casing | Reduces radial loads at off-design operation, minimizes vibration, and extends bearing life. |
| Optional Inducer | A screw-type inducer can be installed at the suction to improve NPSH characteristics for challenging liquid ammonia applications. |
| Cooling System | Finned bearing housing with optional fan cooling ensures stable bearing temperatures under high-temperature operation. Water-cooled configurations available. |
| Heavy-Duty Bearings | Tandem bearings with cooled oil sump. For high-pressure or high-load conditions, pressure lubrication with external oil filtering and cooling can be provided. |
| Shaft Seal Options | API 682-compliant cartridge mechanical seals, gas seals, or packing options available. Double mechanical seals recommended for liquid ammonia to provide an additional safety barrier against leakage. |
Selecting the right material combination is critical for ammonia service. The following options are available based on your specific process requirements:
| Material Class | Casing | Impeller | Shaft |
|---|---|---|---|
| Carbon Steel (WCB) | ✓ | ✓ | — |
| 12% Chromium Steel (CA-15) | ✓ | ✓ | ✓ |
| 304 Stainless Steel | ✓ | ✓ | ✓ |
| 316 / 316L Stainless Steel | ✓ | ✓ | ✓ |
| Duplex Steel (2205) | ✓ | ✓ | ✓ |
| Super Duplex Steel (2507) | ✓ | ✓ | ✓ |
| Titanium (TA2) | ✓ | ✓ | ✓ |
| Hastelloy / Monel / Alloy 20 | ✓ | ✓ | ✓ |
| AISI 4140 (Chrome Steel) | — | — | ✓ |
Suitability for ammonia service: While carbon steel and 12% chromium steel can be used for ammonia handling, 316/316L stainless steel is generally recommended for liquid ammonia service because it provides superior resistance to stress corrosion cracking. Duplex and super duplex materials offer even higher strength and corrosion resistance for the most demanding ammonia synthesis environments.
| System | Description |
|---|---|
| Seal Flush Plans | Full range of API 682 flush plans available: Plan 11 (internal recirculation), Plan 52 (buffer fluid reservoir), Plan 53A/B/C (pressurized barrier fluid), Plan 54 (external barrier fluid system), and others tailored to ammonia applications. |
| Lubrication | Oil ring lubrication (standard), purge oil mist, or pure oil mist systems. |
| Condition Monitoring | Standard provisions for temperature probes (RTD/thermocouples) in bearings and vibration monitoring sensors (accelerometers). |
| Baseplate | Heavy-duty steel baseplate with adequate rigidity to maintain alignment. Grouted or non-grouted installation options. |
| Coupling | Flexible spacer coupling allowing removal of back pull-out assembly without disturbing driver or piping. |
The ammonia synthesis feed pump is a critical rotating asset in the following industries and applications:
Primary Target Service:
Fertilizer plants (urea and ammonia complexes): Liquid ammonia feed from storage or synthesis loop to high-pressure reactor; lean solution and rich solution pumps.
Additional Petrochemical & Refining Applications:
Petroleum refining: Crude oil transfer, refinery process streams, alkylation feed, fractionation bottoms
Petrochemical processing: Chemical raw material transfer, product transfer, reaction circulation
Coal chemical industry: Coal slurry transportation, gasification process pumps, low-temperature engineering
Oil & gas sector: Onshore and offshore hydrocarbon transfer, pipeline transport, FPSO auxiliary services
General Industrial & Power Applications:
Power generation: Boiler feed water, high-temperature water services
Water & environmental: Desalination, brine re-injection, wastewater handling
Pulp, paper, sugar, and pharmaceutical industries: Process fluid handling
Full compliance with API 610 11th Edition and ISO 13709 standards — designed to meet the most demanding requirements of petroleum, petrochemical and natural gas industries.
Specifically engineered for liquid ammonia service — addressing the unique challenges of non-lubricating, low-viscosity, toxic, and corrosive properties of ammonia.
Wide operating envelope — flow rates from 3 m³/h up to 2,600 m³/h, heads up to 400 m, temperatures from -80°C to +450°C, pressures up to 110 bar (with higher-pressure configurations available via BB3/BB5 designs).
Back pull-out design for easy maintenance — internal components can be serviced without disturbing piping or driver, minimizing downtime.
Modular component interchangeability — shafts, casings, covers, wear rings, mechanical seals, and bearings are interchangeable across different pump sizes, reducing spare parts inventory costs.
API 682 mechanical seal compatibility — accommodates single, tandem, and double cartridge-type seals with full range of flush plans, essential for leak-tight ammonia containment.
Heavy-duty, continuous operation — engineered for 24/7/365 service in the harshest industrial environments.
Cost-effective alternative to imported pumps — manufactured in China with full API compliance, providing exceptional value without compromising on reliability or performance.
Customizable for your specific duty — parameter adjustments, material upgrades, and auxiliary system modifications available based on your operating conditions.
As a specialized China OH2 manufacturer with proven experience in ammonia synthesis feed pumps and fertilizer plant applications, we provide:
Full engineering support from specification to commissioning
Custom pump design tailored to your specific flow, head, temperature, and pressure requirements
API 610 compliant product with full documentation and test reports
Factory performance testing and witnessed testing options
Global shipping and export packaging
Spare parts supply and after-sales technical support
For more information or a custom quotation for your ammonia synthesis feed pump application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.