The BB2 circulating water pump is an API 610 Type BB2 horizontal, radially split, between-bearing centrifugal pump designed for continuous heavy-duty service. The "BB2" designation refers to a single-stage, between-bearings, radially split casing configuration with double suction impeller design. This pump is fully compliant with API 610 11th Edition and ISO 13709 standards, making it the preferred choice for demanding circulating water and process water applications.
For the specified duty — water at 40°C with 0.8 MPa inlet pressure — the BB2 pump provides an ideal solution. Its robust construction ensures reliable 24/7 operation in industrial water circulation systems, cooling water loops, and general process water transfer services across power generation, petrochemical refining, chemical processing, and manufacturing facilities.
As a specialized China BB2 pump manufacturer, we offer fully API 610 compliant pumps at competitive lead times and pricing, providing an excellent alternative to imported equipment without compromising on quality or performance.
This pump series is specifically engineered for handling clean or slightly contaminated water-based media across a wide range of industrial applications:
Primary Media:
Circulating cooling water (industrial cooling loops)
Process water (general manufacturing and chemical processes)
Raw water intake and distribution
Quench water circulation
Wash water and cleaning water
Extended Applications:
Condensate and return water (refineries and power plants)
Boiler feed water boosters (low pressure stages)
Desalination plant feed and inter-stage transfer
Water treatment plant pumping (clean water applications)
Seawater cooling (with appropriate material selection)
Low-pressure boiler feed
Temperature and Pressure Range:
Operating Temperature: -80°C to +450°C (the specified 40°C is well within the optimal range)
Design Pressure: Up to 110 bar (11.0 MPa) for standard configurations; higher available
The specified 0.8 MPa (approx. 8 bar) inlet pressure is comfortably accommodated
The double suction impeller design provides inherently balanced axial thrust and excellent Net Positive Suction Head (NPSH) characteristics, making the BB2 pump particularly suitable for circulating water applications where suction conditions may vary.
| Parameter | Value / Range |
|---|---|
| Flow Rate (Q) | 100 ~ 7,500 m³/h |
| Total Head (H) | 20 ~ 600 m |
| Operating Temperature | -80°C ~ +450°C (specified: 40°C) |
| Design Pressure | Up to 110 bar (11.0 MPa) |
| Working Pressure (specified) | 0.8 MPa inlet — well within design envelope |
| Speed | up to 3,600 rpm |
| Casing | Radially split, between-bearing, centerline mounted |
| Impeller Type | Double suction (standard), single suction (optional) |
| Nozzle Orientation | Top-Top (standard), Side-Side (optional) |
| Flange Rating | ASME Class 150 / 300 / 600 |
| Materials | Carbon steel (WCB), 304SS, 316SS, duplex SS, super duplex SS |
Parameter sources from API 610 BB2 compliant pump ranges.
Note: The specified duty parameters (water at 40°C, 0.8 MPa) fall well within the standard operating envelope of API 610 BB2 pumps. Typical circulating water pump selections at this condition would be in the lower end of the temperature range, allowing for optimal material selection and extended service life.
The API 610 BB2 circulating water pump incorporates a comprehensive set of heavy-duty design features ensuring reliable, efficient, and cost-effective operation:
| Feature | Description |
|---|---|
| Between-Bearings Construction | The impeller is mounted between two bearing housings, providing superior shaft rigidity and minimal deflection. This design extends mechanical seal and bearing life, especially critical for continuous 24/7 operation in circulating water systems. |
| Double Suction Impeller | The impeller draws liquid from both sides, resulting in inherent axial thrust balance. This eliminates the need for complex thrust balancing devices and reduces bearing loads. Double suction also provides excellent NPSH characteristics (reduces NPSH3), making the pump suitable for applications with limited available suction head. |
| Radially Split Casing | The casing splits along the vertical centerline (radial split), allowing the rotor assembly to be removed without disturbing suction or discharge piping. This back pull-out design significantly reduces maintenance downtime — a critical advantage for circulating water systems that require high availability. |
| Centerline Mounting | The pump casing is supported at the centerline rather than at the feet. This configuration allows thermal expansion to occur evenly without causing shaft misalignment. For water at 40°C, thermal expansion is minimal, but the feature ensures robust performance across the full operating range. |
| Double Volute Casing Design | The double volute configuration reduces radial hydraulic loads on the impeller, minimizing shaft deflection and vibration. This extends bearing and seal life and ensures smooth operation across the flow range — particularly important for circulating water pumps that may operate at varying flow rates. |
| Heavy Duty Shaft | Large diameter shaft with minimal deflection meets and exceeds API 610 Annex K requirements. Rigid shaft design ensures stable operation and long component life. |
| Heavy Duty Bearings | Deep groove ball bearings or angular contact ball bearings in back-to-back arrangement. Oil ring lubrication (standard), with forced oil or oil mist lubrication available for larger or higher-speed units. For standard water circulation duties, oil ring lubrication is typically sufficient and cost-effective. Finned bearing housings provide effective heat dissipation without requiring cooling water. |
| Mechanical Seal Compatibility | Seal chamber fully compliant with API 682 3rd Edition. Accommodates single, tandem, and double cartridge mechanical seals. For clean water circulation, a simple single mechanical seal with Plan 11 flush (internal recirculation) is typically sufficient. For process water with higher contamination levels, Plan 52 or Plan 53 arrangements may be specified. |
| Wear Rings (Renewable) | Renewable casing and impeller wear rings maintain pump efficiency over the equipment lifetime. When wear occurs, rings can be replaced rather than replacing the entire casing or impeller — a significant cost saving. |
| Flexible Lubrication Options | Oil ring lubrication (standard for most water applications); optional forced oil lubrication for larger units or high-speed operation; optional oil mist lubrication for severe environments. |
| Cooling Arrangements | For standard circulating water at 40°C, finned bearing housing with natural convection cooling is typically sufficient. For elevated temperatures or high ambient conditions, fan cooling or water-cooled bearing housings are available. |
| Baseplate | Heavy duty steel baseplate designed to 2x API 610 nozzle load requirements, eliminating alignment issues caused by piping strain. Grouted installation standard; non-grouted options available. |
| Materials of Construction | Carbon steel casing and components are typically sufficient for circulating water and general process water. For corrosive water or seawater applications, 316 stainless steel, duplex, or super duplex materials should be selected. |
| Component | Standard Material (Water) | Optional Materials (Corrosive/High Temp) |
|---|---|---|
| Casing | Carbon Steel (WCB/A216) | 304SS, 316SS, Duplex SS, Super Duplex SS |
| Impeller | Carbon Steel or 12% Chrome | 304SS, 316SS, Duplex SS, Bronze (for seawater) |
| Shaft | 4140 Chrome Steel (AISI 4140) | Stainless Steel (316, Duplex), Monel, Inconel |
| Wear Rings | 12% Chrome Steel (hardened) | 316SS (hard faced), Duplex SS |
| Casing Bolting | Alloy Steel (B7) | Stainless Steel (B8), Duplex |
| Shaft Sleeve | 316SS (standard) | Duplex SS, Ceramic coated |
Recommendation for circulating water at 40°C / 0.8 MPa: Carbon steel / WCB casing with 12% chrome impeller and 4140 shaft provides excellent service life at the lowest cost. For locations with corrosive water chemistry, upgrade to 316SS materials.
| System | Description |
|---|---|
| Seal Flush Plans | Plan 11 (internal recirculation) recommended for clean water; Plan 52 (buffer fluid) for process water requiring leakage containment; Plan 62 (quench) for high-temperature or crystallizing fluids |
| Lubrication | Oil ring lubrication with constant level oiler — standard and reliable for water service; cooling water circulation optional for bearing housings |
| Condition Monitoring | Provisions for RTD temperature sensors in bearings; provisions for vibration accelerometers (horizontal and vertical); optional pressure gauges on suction and discharge |
| Coupling | Flexible spacer coupling (electric motor drive standard); spacer length allows removal of back pull-out assembly without moving driver |
| Driver Options | Electric motor (most common for circulating water); steam turbine; diesel engine emergency drive |
| Baseplate | Heavy duty steel baseplate with drip rim and oil collection sump; grouted installation with leveling screws |
While lower-cost pumps are available for simple water service, the API 610 BB2 pump is specified for critical circulating water applications where reliability, availability, and maintainability are paramount:
Uninterrupted Operation: Designed for 24/7/365 continuous operation with minimum maintenance — critical for power plants, refineries, and chemical plants where unplanned downtime is unacceptable
Back Pull-Out Design: Complete rotor assembly removal without disturbing piping — minimizes maintenance downtime
Full API Compliance: Engineered and manufactured to the most stringent international standard for heavy duty process pumps (API 610 11th Edition)
Long Component Life: Rigid shaft, robust bearings, and double volute casing design ensure minimum 3+ years between major overhauls
Interchangeable Components: Modular construction allows parts interchangeability across pump sizes, reducing spare parts inventory costs
Customizable for Your Duty: Wide range of material options, seal flush plans, and auxiliary systems available for specific process water conditions
The API 610 BB2 circulating water pump serves critical applications across multiple industries:
Power Generation:
Cooling tower circulating pumps (main condenser cooling)
Raw water intake pumps for power plants
Closed cooling water systems (component cooling)
Station service water pumps
Petroleum Refining:
Cooling water circulation for refinery process units
Quench water circulation for delayed coking units (larger multistage versions)
Wash water and cleaning water systems
Fire water system pumps (type specific)
Petrochemical & Chemical Processing:
Process water transfer and distribution
Cooling water loops for chemical reactors and heat exchangers
Utilities water systems
Desalination plant feed and inter-stage boosting
General Industrial:
Plant cooling water circulation (manufacturing facilities)
Pulp and paper mill water systems
Steel mill process water and cooling water
HVAC central plant chilled water and condenser water circulation
District heating and cooling networks (water side)
As a specialized China BB2 pump manufacturer, we offer:
Full API 610 11th Edition compliance — same as leading global brands
Cost-effective alternative — significantly reduced capital expenditure compared to imported equipment
Shortened lead times — typical delivery 12-16 weeks for standard configurations
Local engineering support — custom design to your specific operating conditions
Complete documentation — performance curves, NPSH curves, certification, and test reports
Factory witnessed testing — optional third-party inspection per customer requirements
Spare parts availability — quick replenishment from regional stock
Competitive total cost of ownership — lower initial cost without compromising reliability
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB2, single stage, between bearings, radially split, double suction |
| Medium | Circulating water / process water |
| Operating Condition | Water at 40°C, 0.8 MPa inlet pressure |
| Flow Range | Suited for 100 to 7,500 m³/h |
| Head Range | 20 to 600 m |
| Construction | Centerline mounted, double volute, heavy duty shaft |
| Mechanical Seals | API 682 compliant (Plan 11 recommended for water) |
| Bearing Lubrication | Oil ring (standard) / forced oil (optional) |
| Certification | API 610 11th Edition / ISO 13709 |
For more information or a custom quotation for your circulating water or process water pump application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.