The High Pressure Ammonia Feed Pump is an API 610 Type BB5 horizontal, double casing (barrel type), radially split, multistage centrifugal pump specifically engineered for feeding liquid ammonia at elevated pressures into high pressure process systems. The pump handles liquid ammonia (anhydrous ammonia) at temperatures up to 40°C and operating pressures reaching 15 MPa as a standard application requirement, with design capabilities extending significantly higher.
In urea production and ammonia synthesis loops, the ammonia feed pump is a critical service pump delivering liquid ammonia from the ammonia storage or synthesis loop into the high pressure urea reactor or downstream high pressure process equipment. The reaction of ammonia with carbon dioxide at approximately 15 MPa (150 bar) requires the ammonia feed pressure to exceed the reactor pressure, placing extremely high demands on pump reliability, seal integrity, and continuous operation.
The BB5 configuration features a double casing design: an outer barrel casing that contains the system pressure, and an inner casing (cartridge) that houses the rotating assembly comprising multistage impellers, diffusers, and bearings. The outer barrel serves as the pressure vessel, while the inner cartridge can be withdrawn axially during maintenance without disturbing the outer barrel or process piping connections — a significant operational advantage for high pressure, hazardous fluid services.
As a specialized China BB5 pump manufacturer, we produce fully API 610 11th Edition (ISO 13709) compliant pumps for the most demanding high pressure process applications, including ammonia feed to urea reactors, ammonia charge pumps in hydrocracking units, and high pressure ammonia transfer in synthesis processes. The BB5 pump is also well proven in high pressure water injection, boiler feed, pipeline services, amine circulation, and CO2 injection applications.
The High Pressure Ammonia Feed Pump is specifically engineered for handling liquid ammonia (anhydrous ammonia, NH₃) under high pressure conditions, along with a variety of other demanding process fluids:
Primary Media:
Anhydrous liquid ammonia (NH₃) — liquefied ammonia at ambient to elevated temperatures
Ammonia with dissolved gases — NH₃ containing dissolved hydrogen, nitrogen, or carbon dioxide
Ammonium carbamate solution — aggressive intermediate in urea synthesis
Ammonia-rich solutions — various concentration levels in fertilizer and chemical processes
Fluid Characteristics and Engineering Challenges:
Operating Temperature: 40°C specified (BB5 design range: -70°C to +450°C)
System Pressure: 15 MPa (150 bar) specified; pump design pressure rating up to 350-500 bar or higher
Non-lubricating fluid: Liquid ammonia has very low lubricity, placing special demands on bearing selection and mechanical seal design
Low viscosity: Ammonia's low viscosity requires careful hydraulic design to maintain efficiency and control internal leakage
Toxicity and hazard classification: Ammonia is toxic, corrosive (requires leak-tight double seals), and flammable; zero-leakage containment is mandatory
Corrosion properties: Anhydrous ammonia does not corrode iron and steel significantly when dry, but corrosion accelerates rapidly in the presence of even trace moisture. Ammonia also induces stress corrosion cracking (SCC) in susceptible materials
High vapor pressure: Liquid ammonia at 40°C has high vapor pressure; NPSH must be maintained to prevent cavitation
Density and specific gravity: Liquid ammonia density at 40°C is approximately 0.58-0.60 specific gravity; low density impacts NPSH and hydraulic performance
Material Compatibility for Liquid Ammonia Service:
Suitable materials for anhydrous liquid ammonia at high pressure:
| Material | Suitability for Liquid Ammonia (40°C, 15MPa) |
|---|---|
| Carbon Steel (WCB/A216) | Yes — widely used for ammonia service when dry; MPa rating appropriate |
| 12% Chromium Steel (CA-15) | Good — commonly used for impellers and wear rings |
| 304 Stainless Steel | Good — general corrosion resistance |
| 316/316L Stainless Steel | Excellent — recommended for stress corrosion cracking resistance |
| Duplex 2205 | Excellent — superior SCC resistance and strength |
| Super Duplex 2507 | Excellent — highest strength for extreme conditions |
| Hastelloy / Monel | Excellent — severe service, high residual stresses |
| 17-4PH Stainless Steel | Good — shafts and high strength rotating components |
Material recommendation for 40°C / 15MPa liquid ammonia:
Casing / Barrel: Carbon steel (WCB) minimum; 316SS or duplex for higher corrosion resistance
Impellers / Diffusers: 316L SS or duplex 2205 (preferred for SCC resistance)
Shaft: 17-4PH SS or Duplex 2205
Wear rings / Bushings: Hardened 12% chrome or 316SS with Stellite facing
Fasteners: A193 B7 or B8M suitable for ammonia; NACE compliance when required
Gaskets / Seals: PTFE / EPDM / FFKM — with EPDM not recommended for anhydrous ammonia; PTFE and FFKM are superior choices
Mechanical seal faces: Silicon carbide vs. carbon (standard); tungsten carbide vs. silicon carbide for severe service
Critical Sourcing Standard: China BB5 pump manufacturer to comply with NACE MR0175 / ISO 15156 when ammonia service contains trace H₂S or other sour gas components.
Extended Applications (Same Pump Platform):
Beyond liquid ammonia feed service, the API 610 BB5 barrel pump platform serves a broad range of high pressure, hazardous fluid services:
Fertilizer and Urea Plants: Ammonium carbamate feed pumps; ammonia recycle pumps; high pressure urea solution transfer
Refining and Petrochemical: Hydrocracking reactor feed pumps; hydrotreating charge pumps; amine feed pumps; alkylation feed pumps; high pressure pipeline pumps
Gas Processing: Gas sweetening amine circulation (high pressure); natural gas condensate pumping; produced water injection; CO2 injection pumps for EOR
Power Generation: High pressure boiler feed pumps (supercritical and subcritical); condensate extraction booster pumps
General Industrial: High pressure water injection (reservoir flooding); reverse osmosis feed; high pressure descaling; liquid transfer at pipeline stations
The API 610 BB5 high pressure barrel pump covers a wide operating envelope:
| Parameter | Value / Range |
|---|---|
| Pump Type | API 610 Type BB5 – double casing (barrel), radially split, multistage |
| Flow Rate (Q) | 20 ~ 2,500 m³/h (selectable to ammonia process requirements) |
| Total Head (H) | Up to 4,600 m (staged to meet required 15MPa+ system pressure) |
| Specified Operating Temperature | 40°C (design range: -70°C to +450°C) |
| Specified Design Pressure | 15 MPa / 150 bar (pump rating up to 420 bar+) |
| Speed (rated) | 1,450 / 2,980 / 3,600 rpm (higher up to 8,000 rpm on request) |
| Casing Construction | Double casing — outer barrel + inner cartridge, radially split |
| Impeller Arrangement | Back-to-back (opposed) for thrust balancing (standard); same direction with balance drum (optional) |
| First Stage Impeller | Single suction (standard) or double suction for reduced NPSH |
| Nozzle Orientation | Top-Top (standard) — eliminates trapped gas pockets |
| Flange Rating | ASME Class 600 / 900 / 1500 / 2500 |
| Materials | Carbon steel, 316/316L SS, duplex 2205, super duplex 2507, 12% Cr |
| Shaft Power | Up to 15 MW (depending on hydraulic requirements) |
Key Parameter Sources:
| Manufacturer / Model | Flow (m³/h) | Head (m) | Pressure (MPa) | Temp (°C) |
|---|---|---|---|---|
| CP-BB5 (Changzhi) | 20–800 | 320–3,200 | Up to 42 MPa | -80–+450 |
| VMB05 (Volm) | 25–1,200 | Up to 3,200 | 15/26/35 MPa | -80–+450 |
| DTD BB5 | max 600 | Up to 2,000 | Up to 30 MPa | -50–+250 |
| HM04 Series | Up to 700 | Up to 2,000 | Up to 25 MPa | -80–+450 |
| BMD Series | 20–900 | Up to 2,200 | Up to 25 MPa | -80–+450 |
| TradeKorea BB5 | Up to 2,000 | Up to 4,572 | Up to 30 MPa | Up to +450 |
| Trillium AHPB | Up to 1,800 | Up to 3,600 | From 4 to 35 MPa | -30–+400 |
| Ruhrpumpen A-Line | Up to 1,400 | Up to 4,200 | Up to 45 MPa | Up to +450 |
| CPC Pumps HB | Up to 1,000 | Up to 3,660 | Standard 15 MPa; optional 26 MPa | Up to +450 |
| Sulzer GSG | Up to 900 | Up to 2,600 | Up to 30 MPa | -30–+425 |
| CNSDp | Up to 1,840 | Up to 2,800 | Up to 30 MPa | Up to +400 |
| Baker Hughes DDHF | Up to 1,800 | Up to 7,000 | Up to 67 MPa | -70–+430 |
Note: The specified duty condition (liquid ammonia at 40°C, 15 MPa) falls well within the standard operating envelope of API 610 BB5 pumps. The number of stages is selected to precisely meet the required discharge head — typically 2 to 16 stages depending on required pressure.
The API 610 BB5 high pressure ammonia feed pump incorporates a comprehensive suite of heavy-duty design features specifically optimized for high pressure, hazardous fluid, continuous chemical service:
| Feature | Description |
|---|---|
| Double Casing (Barrel) Construction | The pump features a robust outer barrel casing that serves as the primary pressure containment vessel, rated for the maximum allowable working pressure (MAWP). Within the barrel, an inner cartridge houses all wetted components (impellers, diffusers, shaft, wear rings). This double casing design provides two independent barriers against leakage of hazardous ammonia to the environment. |
| Radially Split Outer Barrel | The outer barrel splits radially (end closure type) — typically with a bolted cover or shear ring closure at the non-drive end. Barrel material is forged or cast steel, fully radiographed and pressure tested to 1.5x design pressure prior to shipment. |
| Pull-Out Cartridge (Inner Assembly) | The complete internal rotating assembly (impellers, diffusers, shaft, bearings, mechanical seal cartridge) is assembled as a removable cartridge. During maintenance, the end cover is removed and the cartridge is axially withdrawn from the barrel using a pull-out tool. This allows complete pump servicing without disturbing the outer barrel, process piping, or driver — a critical advantage for ammonia service where downtime costs are high and hazardous fluid containment is mandatory. |
| Back-to-Back (Opposed) Impeller Arrangement | Impellers are arranged in opposed groups with stages split into two sets facing opposite directions. This configuration achieves near-complete axial thrust self-balancing without complex balance drums, balancing pistons or thrust compensation devices. For high pressure ammonia feed service, the back-to-back arrangement significantly reduces thrust bearing loads and improves rotor dynamic stability — especially important for low density fluids like liquid ammonia. |
| Diffuser (Vane) Type Casing (Inner) | Stationary diffusers (guide vanes) direct flow from each impeller stage to the next. Diffuser casing provides smooth hydraulics, high efficiency, and minimal radial loads — superior to volute casing for multistage high pressure pumps. Individual diffuser sections are radially split and assembled with metal-to-metal sealing and elastomeric O-rings to eliminate internal recirculation and maximize efficiency. |
| Centerline Mounting | The outer barrel is supported at the pump centerline, allowing uniform thermal expansion without shaft misalignment or casing distortion. For 40°C ammonia service, thermal expansion is minimal, but centerline mounting supports the full operating temperature range from -70°C to +450°C for future applications. |
| Rigid Heavy Duty Shaft | Large diameter shaft with minimal deflection meets and exceeds API 610 Annex K requirements. The shaft is manufactured from high strength material (17-4PH, Duplex, or 4140) capable of transmitting high torque without torsional deflection. Shaft deflection analysis and critical speed calculations are performed using rotordynamics software to ensure first-order wet critical speed is significantly above pump operating speed. |
| Renewable Wear Parts | Casing wear rings, impeller wear rings, interstage bushings, throttle bushings, and balance drum sleeves are all fully renewable and replaceable without replacing the inner casing. Hardened, non-galling material combinations (e.g., 316SS with Stellite facing) resist galling and maintain efficiency over extended operation. |
| Bearing Design and Lubrication | Available bearing configurations based on power and speed: • Oil ring self-lubricating bearings — standard for moderate power applications, with constant level oiler and bearing isolator seals • Forced oil lubrication — required for high power, high speed installations; includes lube oil console with pumps, filters, coolers, and controls • Bearing types: Angular contact ball bearings, cylindrical roller bearings, sleeve bearings, or tilt-pad thrust bearings depending on service |
| Cooling Arrangements | Bearing housing cooling options: • Fan cooling — standard for moderate temperature applications • Finned bearing housings — enhanced natural heat dissipation • Water cooling — recommended for high temperature services or high power installations; cooling water circulated through bearing housing jacket |
| Mechanical Seals | Seal chamber fully complies with API 682 4th Edition (3rd Edition also supported). For liquid ammonia feed service, recommended seal arrangements include: • Double mechanical seal with Plan 53B (pressurized barrier fluid reservoir with bladder accumulator) — preferred for hazardous ammonia service where zero leakage is required; barrier fluid (compatible with ammonia) provides cooling and lubrication to seal faces. • Tandem seal with Plan 52 (unpressurized buffer fluid reservoir) — acceptable for less critical applications • Seal faces: silicon carbide vs. carbon (standard) / tungsten carbide vs. silicon carbide (abrasive service) • Secondary seals: FFKM (Kalrez / Chemraz) or PTFE — EPDM not recommended for anhydrous ammonia |
| Balance Line | Internal balance line routes pressure from the back side of the rotor back to pump suction, equalizing pressure across the mechanical seal and improving seal reliability. |
| First Stage Impeller Design | • Standard single suction — suitable for most applications with adequate NPSH • Double suction first stage (optional) — significantly reduces NPSH required; draws ammonia from both sides of impeller, reducing inlet velocity and cavitation risk. Recommended for ammonia service when NPSH available is limited |
| Casing/Bolting and Gasketing | • Outer barrel closure: bolted or shear ring end cover arrangements • Gaskets and O-rings: PTFE, FFKM, or metal spiral wound • Fasteners: A193 grade B7 or B8M, fully torque-controlled on assembly |
| Shrink-Fit Impeller Attachment (Optional) | Impellers shrink-fit to shaft by induction heating in high speed or high power designs — minimizes residual unbalance and eliminates keyway stress risers. |
Selecting the right materials for high pressure liquid ammonia service is critical for long-term reliability. The recommended material selections address the unique challenges of ammonia corrosion, stress corrosion cracking, non-lubricating nature, and high pressure containment:
API 610 Material Class Options:
All API 610 Table H-1 material classes (S-4 through D-2)
Class S-1, S-6, S-8, A-8, C-6, D-1, D-2
NACE MR0175 / ISO 15156 compliance for sour service (when ammonia contains H₂S)
Recommended Configuration for High Pressure Liquid Ammonia (40°C / 15 MPa):
| Component | Standard Choice | Upgrade Option |
|---|---|---|
| Outer Barrel | Carbon steel (WCB / A216) forged; 25–42 MPa rating | 316L SS or duplex 2205 for higher corrosion resistance |
| Inner Casing (Diffusers) | 316L Stainless Steel | Duplex 2205 SS |
| Impellers | 316L Stainless Steel (balanced per ISO 1940 G2.5) | Duplex 2205 SS |
| Shaft | 17-4PH Stainless Steel (heat treated) | Duplex 2205 SS / Inconel 718 |
| Wear Rings (Casing / Impeller) | Hardened 12% Cr steel / 316L with Stellite facing | Duplex with Stellite coating |
| Interstage / Throttle Bushings | 316L SS with Stellite coating | Duplex with Stellite coating |
| Shaft Sleeves | 316L SS with spiral lift grooves | Duplex 2205 SS |
| Fasteners (Casing / Cover) | A193 B7M / A194 2HM (NACE) or B8M Class 2 (316 SS) | Duplex / Monel K500 |
| O-Rings / Gaskets | PTFE or FFKM (Kalrez / Chemraz) — EPDM NOT RECOMMENDED | — |
| Bearing Material | Steel-backed bronze (oil lubricated) | — |
| Mechanical Seal Faces | Silicon carbide vs. carbon (suitable for clean ammonia) | Tungsten carbide vs. silicon carbide (when contaminants present) |
Material decision guidance for liquid ammonia service:
Carbon steel (WCB/A216) for outer barrel: Acceptable and widely used for liquid ammonia pressure containment as long as internal surfaces remain dry. Provides the lowest cost pressure vessel while meeting strength requirements for 15 MPa.
316/316L SS for internal wetted components: Provides good corrosion resistance to wet ammonia and stress corrosion cracking resistance. For 40°C ammonia, this is a reliable, cost-effective choice.
Duplex 2205: Offers superior corrosion resistance, higher strength, and excellent SCC resistance. Recommended for plants where ammonia may contain trace moisture or when long-term reliability is paramount.
Do not use EPDM, silicone, or butyl rubber O-rings in contact with anhydrous ammonia — rapid degradation occurs. Use PTFE or select FFKM elastomers.
| System | Description and Application to Liquid Ammonia Feed Service |
|---|---|
| Seal Flush Plan | • Plan 53B (pressurized barrier fluid reservoir with bladder accumulator) — recommended for double seals in hazardous ammonia service. Barrier fluid (e.g., compatible oil or water-glycol mixture) is pressurized (typically 1-3 bar above pump suction pressure) to ensure zero leakage of ammonia to atmosphere. • Plan 52 (unpressurized buffer fluid reservoir) — acceptable for tandem seal arrangements where leakage of buffer fluid to atmosphere is monitored • Plan 54 (external barrier fluid system) — for large installations requiring active barrier fluid circulation and cooling • Plan 11 + orifice (single seal) — not recommended for high pressure liquid ammonia service due to leakage risk |
| Lubrication | • Oil ring self-lubricating — standard for moderate power and speed; constant level oiler with sight glass; bearing isolators (e.g., Inpro/Seal) prevent oil mist escape and contamination • Forced oil lubrication — required for high power and high speed applications; includes lube oil console with circulation pumps (main and standby), duplex oil filters (10 micron), oil cooler (water or air cooled), pressure and temperature regulators • **Oil type: ISO VG 46-68 circulating oil (depending on bearing design) |
| Bearing Temperature Monitoring | RTD probes (PT100 3-wire) installed in both drive-end and non-drive-end bearing housings, with local panel indication and 4-20 mA signal to plant DCS for high temperature alarm and trip (trip set point per API 610). |
| Vibration Monitoring | • Proximity probes (eddy current) — for shaft vibration measurement (displacement) per API 670; provides early detection of rotor dynamic issues, unbalance, misalignment, and bearing problems • Accelerometers — for bearing housing vibration (velocity) measurement • Both signals integrated into plant monitoring system with configurable alarm and trip levels |
| Pressure & Temperature Sensors | • Suction and discharge pressure gauges with isolation valves and chemical seals (diaphragm type) to prevent ammonia from reaching pressure instrument • Temperature transmitters on process fluid near suction and discharge nozzles • Suction pressure alarm — critical for preventing pump cavitation in liquid ammonia low NPSH service • Low suction pressure shutdown — protects pump from operation below NPSH required |
| Balance Line System | Internal routing or external piping connecting the back side of the final stage (or balance drum chamber) back to pump suction. Equalizes pressure across the mechanical seal and reduces chamber pressure — extends seal life. |
| Minimum Flow Protection | • Automatic recirculation valve (ARC valve / Flowtronex type) — preferred for continuous operation; ensures pump never operates below minimum continuous stable flow (MCSF) without external control • Control valve + orifice plate — more precise but requires DCS control; suitable for applications with variable flow demand • Protecting against min-flow protects internal wear rings and bearings from overheating caused by recirculation. |
| Baseplate | Heavy-duty fabricated steel baseplate (epoxy grouted recommended). Designed to 2× API 610 nozzle loads to maintain alignment under full piping strain and thermal expansion. Includes drip rim, oil collection sump, foundation bolt slots, and leveling screws. |
| Coupling | Flexible spacer coupling between pump and driver (electric motor or steam turbine). Spacer length sized specifically to allow removal of pull-out cartridge without moving driver. API 610 compliant coupling guard with zero-speed interlock provision. |
The ammonia feed pump is one of the most critical rotating assets in a urea or ammonia synthesis plant, with the following unique demands:
High discharge pressure — Ammonia must be delivered at pressures exceeding the urea reactor pressure (typically 14-16 MPa). The BB5 pump achieves this through multistage construction without excessive tip speeds or large diameter rotors.
Hazardous fluid containment — Ammonia is toxic, corrosive, and potentially flammable. The double casing (barrel) design provides a second pressure containment barrier beyond the inner casing, minimizing environmental release risk in case of inner casing failure. Double mechanical seals with pressurized barrier fluid ensure zero leakage.
Continuous 24/7/365 operation — Ammonia synthesis and urea plants are continuous processes requiring extremely high pump reliability. BB5 pumps are proven to provide 20+ years of service with proper maintenance, with over 1,000 units installed worldwide.
Low density fluid handling — Liquid ammonia at 40°C has relatively low density and low viscosity. The back-to-back impeller configuration with diffuser casings provides stable rotor dynamics and high efficiency even on low specific gravity services.
Ease of maintenance — The pull-out cartridge design allows the complete internal rotating assembly to be removed for overhaul without disturbing the outer barrel or process piping. For ammonia service, this eliminates the need to break high pressure ammonia piping — a significant safety and downtime advantage. Maintenance can be performed offline while the outer barrel remains securely in place.
Additional applications of the same BB5 pump platform for high pressure services:
Hydrocracking reactor feed pumps (refining)
High pressure amine circulation for gas sweetening
Boiler feed water pumps (supercritical power)
CO2 injection pumps for EOR
Produced water injection (offshore / onshore)
Ethylene feed and shipping pumps
Pipeline crude oil pumps
As a specialized China BB5 pump manufacturer, we deliver:
Full API 610 11th Edition / ISO 13709 compliance — same design standards and performance levels as leading Western brands
Proven double casing barrel technology — used in high pressure ammonia, urea, refining, and other critical chemical services globally
Heavy duty construction — outer barrel forged steel (no castings), inner cartridge radially split diffuser design, back-to-back impeller thrust balancing
Competitive capital cost — typically 30-40% lower than major Western brands for equivalent API 610 BB5 configurations
Shorter lead times — 30-40 weeks ARO for standard material configurations; expedited delivery available
Full documentation package — including hydraulic performance curves, NPSH curves, sectionals, GA drawings, API 610 data sheets, material certifications, rotor dynamics analysis, noise prediction
Factory performance testing — witnessed and non-witnessed options on API 610-compliant test loop using water (correlated to liquid ammonia service). Tests include: hydraulic performance (Q-H, efficiency, power), NPSH test, mechanical run test, vibration and bearing temperature monitoring
Global shipping and export packaging — wooden crates, desiccant, VCI, and export documentation
Spare parts availability — critical spares stocked; complete spare parts kits available for scheduled overhauls
Beyond high pressure liquid ammonia feed service, the API 610 BB5 barrel pump serves critical applications across multiple industries:
Fertilizer / Ammonia / Urea:
Ammonia feed pump for urea synthesis — liquid ammonia feed to high pressure urea reactor at 15 MPa
Ammonium carbamate feed pump — pumping aggressive ammonium carbamate solution at high pressure
Ammonia charge pump in ammonia synthesis loops
High pressure ammonia transfer between storage and process
Refining (Downstream):
Hydrocracking reactor feed pump — high pressure charge to hydrocracking reactors
Hydrotreating charge pump — feed to high pressure hydrotreaters
Amine feed pumps for high pressure gas sweetening
Alkylation feed pump — high pressure low temperature service
Oil & Gas / Upstream:
Produced water injection pumps (onshore / offshore) — reservoir pressure maintenance
CO₂ injection pumps — enhanced oil recovery (EOR) and carbon capture storage
Seawater injection pumps — offshore platform waterflood
Crude oil pipeline pumps (mountainous terrain / offshore to onshore)
Power Generation:
Boiler feed pumps — subcritical and supercritical applications
Condensate extraction pumps — high pressure booster service
General Industrial:
High pressure descaling pumps — steel mills (hot rolling mills)
Reverse osmosis feed pumps — high pressure desalination
Pipeline transfer pumps — various high pressure fluid transfer
High pressure chemical injection in petrochemical and refining
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB5 – Double casing (barrel type), radially split, multistage |
| Medium | Liquid ammonia (anhydrous NH₃) |
| Specified Operating Condition | 40°C / 15 MPa (150 bar) |
| Design Temperature Range | -70°C to +450°C |
| Design Pressure Rating | Up to 42 MPa (higher available) |
| Typical Flow Range | 20 – 800 m³/h |
| Typical Head | Up to 3,600 m (staged to discharge pressure) |
| Casing Construction | Outer forged steel barrel + inner radially split diffuser cartridge |
| Impeller Arrangement | Back-to-back (opposed) – self-balanced axial thrust |
| First Stage Impeller | Single suction (standard) / double suction (low NPSH option) |
| Materials (Recommended) | 316L SS (internal) + carbon steel (outer barrel) optional duplex |
| Seals | API 682 compliant double seals (Plan 53B) for zero ammonia leakage |
| Lubrication | Oil ring (standard) / forced oil (high power) |
| Maintenance | Pull-out cartridge design – service without disturbing piping |
| Certification | API 610 11th Edition / ISO 13709 / NACE MR0175 on request |
For more information or a custom engineering proposal for your high pressure liquid ammonia feed pump application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.