The Lower IBOP 114706-500 is manufactured to NOV Varco specifications for the VARCO TDS-11SA top drive system. It installs below the top drive, between the upper IBOP and the drill string, serving as a redundant barrier against uncontrolled flow from inside the drill pipe.
The TDS-11SA is a heavy-duty top drive used in deep and ultra-deep wells. A lower IBOP provides dual barrier protection, a standard practice for high-risk drilling operations as recommended by API 16D.
Direct fit for VARCO TDS-11SA (mounts below upper IBOP)
Working pressure: 5,000 psi (34.5 MPa)
Full bore: 3-1/4" (82.6 mm)
Material: 4130 alloy steel forging
Seals: NBR (nitrile rubber) for standard service
Connections: API IF thread (compatible with TDS-11SA assembly)
Operation: Manual T-handle (clockwise close)
API compliance: API Spec 7-1, API 16D
Redundant barrier – if upper IBOP leaks or fails, lower IBOP provides backup
Pressure equalization – allows safe equalization before opening upper IBOP
Upper IBOP maintenance – enables removal of upper IBOP under pressure
Full bore design – no restriction for wireline tools or logging equipment
| Position | Part Number | Primary Role |
|---|---|---|
| Upper IBOP | 110103-500 | Primary barrier, closes before breaking connection |
| Lower IBOP | 114706-500 | Secondary barrier, backup for well control |
Deep and ultra-deep wells (5,000 – 10,000+ m)
Offshore drilling (jack-up, semi-sub, drillship)
High-pressure, high-temperature (HPHT) wells (with NBR temp limit 121°C)
Non-sour environments (for H₂S, order 114706-502)
For pricing, availability, and technical datasheets:
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.