The Lower IBOP 114706-500 is manufactured to NOV Varco specifications for the VARCO TDS-8SA top drive system. It installs below the top drive, between the upper IBOP and the drill string, serving as a redundant barrier against uncontrolled flow from inside the drill pipe.
The TDS-8SA is a medium-duty top drive used in deep wells and hard formations. Adding a lower IBOP provides dual barrier protection, which is standard practice for critical well control.
Direct fit for VARCO TDS-8SA top drive (mounts below upper IBOP)
Working pressure: 5,000 psi (34.5 MPa)
Full bore: 3-1/4" (82.6 mm)
Material: 4130 alloy steel forging
Seals: NBR (nitrile rubber) for standard service
Connections: API IF thread (compatible with TDS-8SA assembly)
Operation: Manual T-handle (clockwise close)
API compliance: API Spec 7-1, API 16D
Redundant barrier – if upper IBOP leaks or fails, lower IBOP provides backup
Pressure equalization – allows safe equalization before opening upper IBOP
Full bore – no restriction for wireline tools
Field-proven – used on TDS-8SA installations requiring dual isolation
| Position | Part Number | Primary Role |
|---|---|---|
| Upper IBOP | 110103-500 | Primary barrier, closes before breaking connection |
| Lower IBOP | 114706-500 | Secondary barrier, backup for well control |
Deep wells (3,500 – 5,000 m)
Hard formation drilling
Wells requiring dual barrier isolation
Non-sour environments (standard NBR version)
For pricing, availability, and technical datasheets:
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.