| Parameter | Value |
|---|---|
| Series | 364 Series |
| Plug Type | Top Plug |
| Anti-Rotation | Yes (interlocking teeth) |
| Core Material | Plastic (PDC drillable) |
| Elastomer Options | Water-based mud / Oil-based mud |
| Compatible Equipment | Float collars/shoes with non-rotating receiver plates |
| Casing Size Range | 4-1/2" to 13-3/8" (114.3 mm to 339.7 mm) |
Data source: Technical data table.
The 364 Series is dimensioned to match the specific casing ID and the receiver plate profile.
| Casing Size | Plug OD | Core Type | Anti-Rotation Feature |
|---|---|---|---|
| 5-1/2" – 13-3/8" | Matched to casing ID | Plastic | Interlocking Teeth |
Specific dimensions and tooth profiles are confirmed against the selected float equipment at order.
In long horizontal sections, standard cement plugs have a tendency to spin when the drill bit contacts them. This spinning delays drill-out and can damage the PDC bit.
Upgrading to non-rotating plugs for your next horizontal well?
For standard cementing applications, see the Cementing Plugs Series.
Pressure and temperature ratings are application-dependent. Verify the plug's integrity against your well's maximum anticipated differential pressure before installation.
Need to ensure your float equipment is compatible with the 364 anti-rotation plug? Send us your float collar specifications, and we will confirm the receiver plate compatibility.
Q: Why does a standard cement plug spin during drill-out?
A: The friction between the drill bit and the rubber fins can cause the plug to rotate. In horizontal wells, gravity keeps the plug on the low side, making it harder to drill out without spinning.
Q: Can I use the 364 plug in a standard float collar?
A: No. The 364 Series requires a float collar or shoe equipped with a non-rotating receiver plate to engage the teeth and prevent rotation.
Q: Is the plastic core PDC drillable?
A: Yes. The core is made of a special plastic material designed to be easily drilled out with a PDC bit.
Q: What is the typical lead time?
A: Standard lead time is 3-4 weeks. For urgent horizontal drilling schedules, please contact us to expedite.
For 364 Series Non-Rotating Cement Plug selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.